light PEUGEOT 607 2007.5 Owner's Manual

3COMFORT
Automatic day/night interior
mirror Operation

Switch on the ignition and press switch
1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mir-
ror clears automatically when
reverse gear is engaged.
Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
 When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .

 Adjust the height and depth of the
steering wheel.

 Lock by pulling handle A fully.

4
59
REMOTE CONTROL KEY Unfolding/Folding the key
To unfold or fold the key, press button

A i rst. Unlocking
Normal locking


Press button B for complete locking
of the vehicle.

 Press button B for more than
2 seconds for automatic closing
of the windows and sunroof in
addition to locking.
Each action is coni rmed by i xed
lighting of the direction indicators for
approximately two seconds.
The exterior mirrors fold at the same
time. Complete

 Press button C for complete un-
locking of the vehicle.
This is coni rmed by rapid l ashing of
the direction indicators for approxi-
mately two seconds.
The complete or selective
unlocking can be coni g-
ured by means of a param-
eter, via the multifunction
display "Personalisation-
Coni guration" menu.
The remote control in the key permits
remote locking, deadlocking and un-
locking of the doors, boot and fuel i ller
l ap, as well as folding and unfolding of
the exterior mirrors.
The key permits mechanical and inde-
pendent operation of the glove box lock,
of the passenger air bag disarming con-
trol and of the mechanical child lock as
well as switching on of the ignition.
From the driver’s door, the key permits
electrical control of the locking or un-
locking of the doors, boot and fuel i ller
l ap.
If one of the doors or the boot is open,
the central locking does not function. When the vehicle is locked,
if unlocking is activated inad-
vertently, without a door being
opened within 30 seconds, the
vehicle will lock automatically.
Selective

 Press button C to unlock the
driver’s door and the fuel i ller l ap
only.

 Press the button again to unlock
the other doors and the boot.
Each action is coni rmed by rapid
l ashing of the direction indicators for
approximately two seconds.
The exterior mirrors unfold at the same
time.

4
63
ALARM Setting the alarm

 Switch off the ignition and get out
of the vehicle.

 Set the alarm by locking or dead-
locking using the remote control
(button A indicator light l ashes
once per second).
When the alarm is triggered, the siren
sounds and the direction indicators
l ash for thirty seconds.
The alarm remains set following each
triggering incident. Disarming
Unlock the vehicle with the remote
control key (button
B indicator light
goes out).

Note: if the alarm has been triggered
while you were away from your car, the
rapid l ashing of the indicator light will
stop when you switch on the ignition.
Automatic activation *
The alarm is activated automatically
two minutes after the last closing of a
door or the boot.
In order to avoid accidental triggering
of the alarm when a door or the boot
is opened, it is essential to press the
remote control opening button i rst.
This provides two types of protection:
-
exterior protection , it sounds if
a door, the boot or the bonnet is
opened.
- interior protection , it sounds if
the sensors detect a variation in
the air movement inside the ve-
hicle (breaking of a window or a
movement inside the vehicle).
Warning: if the alarm has
been triggered ten times in
succession, on the eleventh
time it becomes inactive.

Note: if button A l ashes rapidly, the
alarm has been triggered while you
were away from your vehicle.
If you wish to lock your vehicle without
setting the alarm, use the door lock.

4
64
To set the alarm with exterior
protection only Failure of the remote control

 Unlock the doors with the key and
open the door. The alarm is trig-
gered.

 Switch on the ignition in the next
ten seconds. The alarm is dis-
armed.
Incorrect operation
When the ignition is switched on, if
button A lights for ten seconds, there
is a fault in the siren connection.
Contact a PEUGEOT dealer to have
the system checked.
If, while you are away from the vehi-
cle, you wish to leave a window par-
tially open or a pet inside the vehicle,
you should choose exterior protection
only.

 Switch off the ignition.

 In the next ten seconds, press but-
ton B until its indicator light is on
continuously.

 Get out of the vehicle.

 Set the alarm by locking or dead-
locking using the remote control
(button A and button B indicator
lights l ash once a second).

4
66
Always remove the key from
the ignition when leaving the
vehicle, even for a short time.
In the event of contact when
operating the windows, you must re-
verse the movement of the window. To
do this, press the switch concerned.
When the driver operates the passen-
ger window switches, he must ensure
that no one is preventing correct clos-
ing of the window.
The driver must ensure that passengers
use the electric windows correctly.
Be aware of children when operating
the windows. DOORS
Opening the doors from outside
Opening the doors from inside Locking/unlocking from the inside
-
Using button
A of the centre console:
this allows the doors, the boot and
the fuel i ller l ap to be locked or
unlocked.

Note: the button A indicator light is lit
or l ashes when the vehicle is locked.
- Using button B on the door:

4
66
Always remove the key from
the ignition when leaving the
vehicle, even for a short time.
In the event of contact when
operating the windows, you must re-
verse the movement of the window. To
do this, press the switch concerned.
When the driver operates the passen-
ger window switches, he must ensure
that no one is preventing correct clos-
ing of the window.
The driver must ensure that passengers
use the electric windows correctly.
Be aware of children when operating
the windows. DOORS
Opening the doors from outside
Opening the doors from inside Locking/unlocking from the inside
-
Using button
A of the centre console:
this allows the doors, the boot and
the fuel i ller l ap to be locked or
unlocked.

Note: the button A indicator light is lit
or l ashes when the vehicle is locked.
- Using button B on the door:

5VISIBILITY
71
LIGHTS STALK
Lights off.
Side lights. Dipped/main beam head-
lamps. Dipped/main beam change

 Pull the stalk fully towards you.
Lights on
With the ignition and the automatic lights
function switched off, on opening the
driver's door a buzzer sounds to warn
you that you have left your lights on.
Front and rear fog lamps (ring B)

 Turn ring B forwards to switch on
and backwards to switch off. The
position is coni rmed by the light
on the instrument panel.
Front fog lamps (one press)
These operate with the side lights, dipped
headlamps or main beam headlamps.
Rear fog lamps (two presses)
These operate with the side lights and
the front fog lamps, or with the dipped
headlamps.
Left: downwards.

Right: upwards.
Direction indicators (l ashers)

Note: if you forget to return the
direction indicator to its normal
position, the volume of the
audible signal will increase, if
you are driving at a speed greater than
50 mph (80 km/h).
Parking lights
The side lights are lit on the side the
trafi c is on.
With the ignition off and within the next
minute, place the direction indicators
stalk on the trafi c side (for example:
for parking on the right; switching on
of the lights on the left).
This is indicated by an audible signal
and lighting of the corresponding
direction indicator on the instrument
panel.
Automatic "follow-me-home"
lighting
When you leave your vehicle with the
automatic switching on of the lights
activated , the side lights and dipped
headlamps remain on for the duration
selected when the ignition is switched
off.
To deactivate or activate this func-
tion, pass via the multifunction display

" P e r s o n a l i s a t i o n - C o n f i g u r a t i o n "
menu.
Front and rear lights (ring A)

 Turn ring A to the position required.

5VISIBILITY
72
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Coni guration"
menu. Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.

Note: in foggy weather, the brightness
sensor can detect sufi cient light. As a
consequence, the lights will not come
on automatically.
This function is active when the vehicle
is supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
Coni guration" menu.
Activation Deactivation.
When this function is activated,
the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:

 l ash the headlamps,

 get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switch-
ing on of the lights, the manual "follow-
me-home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:

 switch off the engine,

 l ash the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 l ash the headlamps again,

 get out of the vehicle and lock it.
If the brightness sensor does not
function correctly , the system activates
the function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
This indicator light comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switching
to the automatic switching on of the lights
mode or when the lights are switched on
manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.

5VISIBILITY
72
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Coni guration"
menu. Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.

Note: in foggy weather, the brightness
sensor can detect sufi cient light. As a
consequence, the lights will not come
on automatically.
This function is active when the vehicle
is supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
Coni guration" menu.
Activation Deactivation.
When this function is activated,
the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:

 l ash the headlamps,

 get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switch-
ing on of the lights, the manual "follow-
me-home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:

 switch off the engine,

 l ash the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 l ash the headlamps again,

 get out of the vehicle and lock it.
If the brightness sensor does not
function correctly , the system activates
the function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
This indicator light comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switching
to the automatic switching on of the lights
mode or when the lights are switched on
manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.

5VISIBILITY
75
COURTESY LIGHTS Deactivation
Activation
To re-activate the automatic lighting,
press switch 1 again. Sill illumination
The sill lighting is at the bottom of each
door trim.
The lights come on automatically
when a door is opened and switch off
automatically when all of the doors are
closed.
Boot light
The boot light is located in the left boot
trim.
It comes on automatically when the
boot is opened and switches of auto-
matically when the boot is closed.

1. Front courtesy light

2. Front map reading lights
With the ignition on, operate the relevant switch.

3. Rear courtesy light

4. Rear map reading lights
With the ignition on, operate the relevant switch.
Pressing switch 1 switches on the
front and rear courtesy lights for ten
minutes.
The front and rear courtesy lights come
on automatically when the ignition key
is removed, on unlocking the vehicle
or on opening one of the doors.
They gradually go off after the ignition
has been switched on or the vehicle
is locked. The courtesy lights can be deacti-
vated by pressing switch
1 for more
than three seconds. Pressing switch

1 briel y switches the front and rear
courtesy lights on and off.
The map reading lights are not affected
by this and can still be switched on .