PEUGEOT 807 2008.5 Owners Manual
Manufacturer: PEUGEOT, Model Year: 2008.5, Model line: 807, Model: PEUGEOT 807 2008.5Pages: 252, PDF Size: 10.67 MB
Page 131 of 252
0 3
5
6
7
1
2
3
4
131 N A V I G A T I O N - G U I D A N C E
ROUTE OPTIONS
Select the ROUTE DYNAMICS function. This function provides access to the TRAFFIC INDEPENDENT orSEMI-DYNAMIC options.
Select the AVOIDANCE CRITERIA function. This function provides access to the AVOID options ( m o t o r w a y s , t o l l r o a d s , f e r r i e s ) .
Turn the dial and select the RECALCULATE function to take into account the route options selected. P r e s s t h e d i a l t o c o n fi r m .
Press the NAV button.
Press the NAV button again or select the NAVIGATION MENU function and p r e s s t h e d i a l t o c o n fi r m .
Select the ROUTE TYPE function and p r e s s t h e d i a l t o c o n fi r m . T h i s f u n c t i o n allows you to change the route type.
Select the ROUTE OPTIONS function a n d p r e s s t h e d i a l t o c o n fi r m .
N A V I G A T I O N M E N U
ROUTE OPTIONS
R O U T E T Y P ERECALCULATE
A V O I D A N C E C R I T E R I A
R O U T E D Y N A M I C S
The route selected by the WIP Nav audio/telephone depends directly on the route options. Changing these options may change the route comple tely.
Page 132 of 252
132
5
6
7
1
2
3
4
A D D I N G A S T O P O V E R
Enter a new address, for example.
Once the new address has been entered, select OK and press the dial t o c o n fi r m .
Select RECALCULATE and press the d i a l t o c o n fi r m .
Press the NAV button.
Press the NAV button again or select the NAVIGATION MENU function and p r e s s t h e d i a l t o c o n fi r m .
Select the ADD A STOPOVER f u n c t i o n ( 5 s t o p o v e r s m a x i m u m ) a n d p r e s s t h e d i a l t o c o n fi r m .
Select the STOPOVERS function and p r e s s t h e d i a l t o c o n fi r m .
N A V I G A T I O N M E N U
S T O P O V E R S
A D D A S T O P O V E R
OK
ENTER A NEW ADDRESS
RECALCULATE
The stopover must be completed or deleted in order for er for the guidance to continue to the next destination. Otherwise, the WIP N WIP Nav will always return you to the previous stopover.
Stopovers can be added to the route once the destination has been selected.
Page 133 of 252
0 3
1
2
3
4
7
8 5
6
N A V I G A T I O N - G U I D A N C E
SEARCHING FOR POINTS OF INTEREST
Press the NAV button.
Press the NAV button again or select the NAVIGATION MENU function and p r e s s t h e d i a l t o c o n fi r m .
Select the POI NEARBY function to search for POIs around the vehicle.
Select the SEARCH POINTS OF INTEREST function and press the d i a l t o c o n fi r m .
N A V I G A T I O N M E N U
SEARCH POINTS OF INTEREST
P O I N E A R B Y
Select the POI IN CITY function to search for POIs in the city required. Select the country then enter the name of the city using the virtual keypad.
Select the POI NEAR ROUTE function to search for POIs near the route.
Select the POI IN COUNTRY function to search for POIs in the country required.
Select the POI NEAR DESTINATION function to search for POIs near the point of arrival of the route.
POI NEAR DESTINATIONPOI NEAR ROUTE
P O I I N C O U N T R Y
A list of cities present in the country selected can be accbe accessed via the LIST button on the virtual keypad.
P O I I N C I T Y
T h e p o i n t s o f i n t e r e s t ( P O I s ) i n d i c a t e a l l o f t h e s e r v i c e l o c a t i o n s i n t h e v i c i n i t y ( h o t e l s , v a r i o u s b u s i n e s s e s , a i r p o r t s . . . ) .
Page 134 of 252
134
0 3 N A V I G A T I O N - G U I D A N C E
List of POIs * according to availability in the country
Page 135 of 252
0 3
6
4
5
1
2
3
135
N A V I G A T I O N S E T T I N G S
Select the NAVI VOLUME function and turn the dial to set the volume o f e a c h v o i c e s y n t h e s i s e r ( t r a f fi c i n f o r m a t i o n , a l e r t m e s s a g e s … ) .
Select HAZARDOUS LOCATION POIs to gain access to the DISPLAY ON MAP, VISUAL ALERT and SOUND ALERT functions.
Select the POI CATEGORIES ON MAP function to select the POIs to be displayed on the map by default.
N A V I V O L U M E
Press the NAV button.
N A V I G A T I O N M E N U
Press the NAV button again or select the NAVIGATION MENU function and p r e s s t h e d i a l t o c o n fi r m .
SETTINGS
Select the SETTINGS function and p r e s s t h e d i a l t o c o n fi r m .
H A Z A R D O U S L O C A T I O N P O I s
POI CATEGORIES ON MAP
N A V I G A T I O N - G U I D A N C E
Contact a PEUGEOT dealer for details of the procedure for obtaining the HAZARDOUS LOCATION POIs.
Page 136 of 252
136
0 4
1
2
5
4
3
CONFIGURE THE FILTERING AND
D I S P L A Y I N G O F T H E T M C M E S S A G E S
On the list which appears, select the distance radius required in accordance with the route. P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Press the TRAFFIC button again or select the TRAFFIC MENU function a n d p r e s s t h e d i a l t o c o n fi r m .
GEOGRAPHICAL FILTER (NONE)
Press the TRAFFIC button.
T h e fi l t e r s a r e i n d e p e n d e n t a n d t h e i r r e s u l t s a r e c u m u l a t i v e . W e r e c o m m e n d a fi l t e r o n t h e r o u t e a n d a fi l t e r a r o u n d t h e v e h i c l e o f : - 2 m i l e s ( 3 k m ) o r 3 m i l e s ( 5 k m ) f o r a r e g i o n w i t h h e a v y t r a f fi c , - 6 m i l e s ( 1 0 k m ) f o r a r e g i o n w i t h n o r m a l t r a f fi c , - 3 0 m i l e s ( 5 0 k m ) f o r l o n g j o u r n e y s ( m o t o r w a y ) .
Select the GEOGRAPHICAL FILTER ( N O N E ) f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
MESSAGES ON ROUTE
The list of TMC messages appears under the TRAFFICAFFIC MENU sorted in order of proximity.
ALL MESSAGES
TRAFFIC MENU
O N L Y W A R N I N G S O N R O U T E
S e l e c t t h e fi l t e r o f y o u r c h o i c e :
ALL WARNING MESSAGES
The messages appear on the map and on the list. To exit, press ESC.
The TMC icon, at the bottom left of the scthe screen, may appear in 3 different forms: - No TMC station available - TMC station available, no message on re on route - TMC station available and messages onges on route ( i f g u i d a n c e i s a c t i v e )
Page 137 of 252
11
2
3
0 5
SELECTING A STATION
When the current radio station is displayed on the screen, press the dial.
The radio source short-cuts menu appears and providesovides access to the following short-cuts:
Select the function required and press t h e d i a l t o c o n fi r m t o g a i n a c c e s s t o the corresponding settings.
TA
The RDS, if displayed, allows you to continue listening tning to the same station by means of the frequency following. Howeve r, inever, in certain conditions, this RDS station cannot be followed throughroughout the entire country as radio stations do not cover 100 % of the terrie territory. This explains the loss of reception of the station during a jour a journey.
T h e e x t e r n a l e n v i r o n m e n t ( h i l l , b u i l d i n g , t u n n e l , u n d e r g r o u n d c a r p a r k . . . ) m a y i n t e r f e r e w i t h t h e reception, including in RDS following mode. This ph enomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a failure of the audio equipment.
R D S - R E G I O N A L M O D E - T R A F F I C I N F O
Press the RADIO button to display the list of stations received locally sorted in alphabetical order. Select the station required by turning t h e d i a l a n d p r e s s t o c o n fi r m .
W A V E B A N D
R E G I O N A L P R O G . ( R E G ) RADIOTEXT
RDS
While listening to the radio, press one of the buttons to select the previous or next station on the list.
Press one of the buttons on the numeric keypad for
moor more than2 seconds to store the current station. Press the button on the numeric keypad to recall the stothe stored radio station.
RADIO
A long press of one of the buttons starts the automatic search for a station with a lower or higher frequency.
Page 138 of 252
138
0 6 M U S I C M E D I A P L A Y E R S
C D , M P 3 / W M A S D C A R D
I N F O R M A T I O N A N D A D V I C E
If the GPS is used, the navigation SD card must remain in the WIP NAV audio/telephone reader. I n t h i s c a s e , i t i s n o t p o s s i b l e t o p l a y a n S D c a r d c o n t a i n i n g M P 3 fi l e s .
In order to be able to play a recorded CDR or CDRW , wRW, when recording it is preferable to select the ISO 9660 level 1, vel 1, 2 or Joliet standard. If the disc is recorded in another format it may not be plat be played correctly. It is recommended that the same recording standard is ard is always used f o r a n i n d i v i d u a l d i s c , w i t h a s l o w a s p e e d a s p o s s i b l e ( 4 x m a x i m u m ) f o r a n i n d i v i d u a l d i s c , w i t h a s l o w a s p e e d a s p o s s i b l e ( 4 x m a x i m u m ) for optimum sound quality. In the particular case of a multi-session CD, the Joliet stoliet standard is recommended.
T h e a u d i o e q u i p m e n t w i l l o n l y p l a y a u d i o fi l e s w i t h t h e e x t e n s i o n T h e a u d i o e q u i p m e n t w i l l o n l y p l a y a u d i o fi l e s w i t h t h e e x t e n s i o n ".mp3" with a speed of between 8 Kbps and 320 Kbps abps and the extension ".wma" with a speed of between 5 Kbps and 3s and 384 Kbps.
The MP3 format, an abbreviation of MPEG 1,2 & 2.5 Au2.5 Audio Layer 3 and the WMA format, an abbreviation of Windows Medi Media Audio and the property of Microsoft, are audio compression standastandards which p e r m i t t h e r e c o r d i n g o f s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c . p e r m i t t h e r e c o r d i n g o f s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c .
I t a l s o s u p p o r t s t h e V B R ( V a r i a b l e B i t R a t e ) m o d e . N o o t h e r t y p e o f fi l e ( . m p 4 , m 3 u . . . ) c a n b e p l a y e d .
I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s , w i t h o u t u s i n g o f I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s , w i t h o u t u s i n g o f s p e c i a l c h a r a c t e r s ( e . g . : " " ? ; ù ) t o a v o i d a n y p l a y i n g a n d d i s p l a y i n g s p e c i a l c h a r a c t e r s ( e . g . : " " ? ; ù ) t o a v o i d a n y p l a y i n g a n d d i s p l a y i n g problems.
During play, exit the SD Card source before removi ng thving the SD card from its reader. To avoid any risk of theft, remove the SD card when youen you leave your vehicle with the roof down.
Page 139 of 252
1
2
3
5
4
6
139
S E L E C T I N G / P L A Y I N G M U S I C
C D , M P 3 / W M A C D , M P 3 / W M A S D C A R D
The playing and displaying of an MP3/WMA compilationilation may depend on the recording programme and/or the parameters us ers used. We recommend the ISO 9660 recording standard.
Press the MUSIC button.
Select the SELECT MUSIC function a n d p r e s s t h e d i a l t o c o n fi r m .
Press the up or down button to select the next/previous folder.
Select the music source required: CD, MP3/WMA CD, MP3/WMA SD C A R D … P r e s s t h e d i a l t o c o n fi r m . Play begins.
SELECT MUSIC
Press the MUSIC button again or select the MUSIC MENU function and p r e s s t h e d i a l t o c o n fi r m .
Press one of the buttons to select a music track. Press and hold one of the buttons for fast forward or backward play. MUSIC MENU
T h e l i s t o f t r a c k s o r M P 3 / W M A fi l e s a p p e a r s u n d e r M U S I C M E N U . T h e l i s t o f t r a c k s o r M P 3 / W M A fi l e s a p p e a r s u n d e r M U S I C M E N U .
Page 140 of 252
140
1
2
3
4
1
4
0 6
2
3
5
C o n n e c t t h e p o r t a b l e e q u i p m e n t ( M P 3 / W M A p l a y e r … ) t o t h e a u d i o C o n n e c t t h e p o r t a b l e e q u i p m e n t ( M P 3 / W M A p l a y e r … ) t o t h e a u d i o s o c k e t s ( w h i t e a n d r e d , R C A t y p e ) i n t h e g l o v e b o x u s i n g a s o c k e t s ( w h i t e a n d r e d , R C A t y p e ) i n t h e g l o v e b o x u s i n g a JACK/RCA audio cable.
Press the MUSIC button then press it again or select the MUSIC MENU f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
Select the AUX music source and p r e s s t h e d i a l t o c o n fi r m . P l a y b e g i n s automatically.
Select the EXTERNAL DEVICE function and press the dial to activate it.
E X T E R N A L D E V I C E
Insert one or more CDs in the changer. Press the MUSIC button.
Press one of the buttons on the numeric keypad to select the corresponding CD.
Select the CD CHANGER music s o u r c e a n d p r e s s t h e d i a l t o c o n fi r m .
The displaying and management of the controls are opere operated via the portable equipment.
CD CHANGER
Select the SELECT MUSIC function a n d p r e s s t h e d i a l t o c o n fi r m .
SELECT MUSIC
MUSIC MENU
U S I N G T H E E X T E R N A L D E V I C E ( A U X )
AUDIO/RCA CABLE NOT SUPPLIED
CD CHANGER
P L A Y I N G A C D ( N O T M P 3 / W M A C O M P A T I B L E )
Press the MUSIC button again or select the MUSIC MENU function and p r e s s t h e d i a l t o c o n fi r m .
M U S I C M E D I A P L A Y E R S