ignition PEUGEOT 807 2008.5 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2008.5, Model line: 807, Model: PEUGEOT 807 2008.5Pages: 252, PDF Size: 10.67 MB
Page 51 of 252
Steering wheel controls
ERGONOMICS and COMFORT
3
55
Switching the function off
- P l a c e t h e d i a l i n p o s i t i o n 0 or switch
off the ignition to switch the system
o f f . T h e l a s t p r o g r a m m e d s p e e d
remains in the memory.
Exceeding the programmed
speed
P r e s s i n g t h e a c c e l e r a t o r p e d a l i n o r d e r
t o e x c e e d t h e p r o g r a m m e d s p e e d
will have no effect unless you press
t h e p e d a l
fi r m l y b e y o n d t h e point of
resistance .
T h e l i m i t e r i s d e a c t i v a t e d t e m p o r a r i l y
a n d t h e p r o g r a m m e d s p e e d fl a s h e s .
T o r e t u r n t o t h e l i m i t e r f u n c t i o n , r e d u c e
y o u r s p e e d t o b e l o w t h e p r o g r a m m e d
s p e e d . Operating fault
T h e p r o g r a m m e d s p e e d i s c l e a r e d a n d
t h e d a s h e s fl a s h f o r a f e w s e c o n d s .
C o n t a c t a P E U G E O T d e a l e r t o h a v e
t h e s y s t e m c h e c k e d .
Flashing of the speed
T h e s p e e d fl a s h e s :
- following forcing of the accelerator p o i n t o f r e s i s t a n c e ,
- when the limiter cannot prevent an i n c r e a s e i n t h e v e h i c l e s p e e d d u e
t o t h e p r o fi l e o f t h e r o a d o r o n a
s t e e p d e s c e n t ,
- in the event of sharp acceleration. Good practice
I n a n y e v e n t , t h e s p e e d l i m i t e r c a n n o t
r e p l a c e t h e n e e d t o o b s e r v e s p e e d l i m i t s ,
n o r c a n i t r e p l a c e t h e n e e d f o r v i g i l a n c e
a n d r e s p o n s i b i l i t y o n t h e p a r t o f t h e d r i v e r .
A l w a y s p a y a t t e n t i o n t o t h e p r o fi l e o f t h e
r o a d , t a k e c a r e o n s h a r p a c c e l e r a t i o n a n d
stay in complete control of your vehicle.
T o a v o i d a n y j a m m i n g u n d e r t h e
p e d a l s :
- e n s u r e t h a t t h e m a t a n d i t s fi x i n g s p o s i t i o n e d c o r r e c t l y ,
- never place one mat on top of another.
Page 61 of 252
66
Seats
3 - Seat back angle adjustment
Tilt the control to the front or the rear to o b t a i n t h e a n g l e r e q u i r e d .
The electrical functions of the s e a t s a r e c a n c e l l e d o n e m i n u t e after the ignition has been s w i t c h e d o f f .
4 - Driver’s seat lumbar adjustment (mechanical)
Raise or lower the lever to obtain the correct position.
5 - Head restraint height and angle adjustment (manual)
T o r a i s e o r l o w e r t h e h e a d r e s t r a i n t , p u l l i t f o r w a r d s , t h e n s l i d e i t .
N e v e r d r i v e w i t h t h e h e a d r e s t r a i n t s r e m o v e d ; t h e y m u s t b e i n p l a c e a n d c o r r e c t l y a d j u s t e d .
6 - Rotating of seats (mechanical)
Place the seat back in the upright position.
Place the seat in the highest i n t e r m e d i a t e l o n g i t u d i n a l p o s i t i o n .
O n t h e d r i v e r ’ s s i d e , p u s h t h e s t e e r i n g w h e e l , a p p l y t h e h a n d b r a k e . T o a l l o w r o t a t i o n o f t h e s e a t , l o w e r t h e h a n d b r a k e h a n d l e p u l l i n g o n t h e e n d .
P u l l t h e c o n t r o l u p w a r d s a n d r o t a t e t h e s e a t i n w a r d s .
This rotating operation must b e c a r r i e d o u t w i t h t h e e n g i n e s w i t c h e d o f f . T h e h a n d b r a k e , the lever of which is now in the lower p o s i t i o n , r e m a i n s a p p l i e d . D o n o t f o r g e t t o r a i s e t h e l e v e r a n d r e l e a s e t h e b r a k e before setting off.
D r i v i n g w i t h a p a s s e n g e r s e a t e d f a c i n g t h e r e a r i s p r o h i b i t e d .
F o r f u r t h e r i n f o r m a t i o n r e g a r d i n g t h e d i s e n g a g i n g o f t h e h a n d b r a k e , refer to the "Driving safety" section of chapter 5.
The setting is correct when the upper e d g e o f t h e h e a d r e s t r a i n t i s l e v e l w i t h t h e t o p o f t h e h e a d .
T o r e m o v e t h e h e a d r e s t r a i n t , p l a c e i t i n t h e h i g h p o s i t i o n , l i f t t h e t a b u s i n g a c o i n a n d p u l l u p w a r d s a n d f o r w a r d s a t the same time.
T o r e - i n s t a l l , e n g a g e t h e h e a d r e s t r a i n t r o d s i n t h e h o l e s , m a k i n g s u r e t h e y a r e a l i g n e d w i t h t h e s e a t b a c k .
Page 62 of 252
ERGONOMICS and COMFORT
3
67
Seats
Memorising seat positions
T w o d r i v i n g p o s i t i o n s c a n b e m e m o r i s e d , u s i n g buttons M/1 a n d M/2 .
T h e s e a r e l o c a t e d o n t h e s i d e o f t h e seat:
Place the ignition key in the " r u n n i n g " p o s i t i o n ( 2 n d n o t c h ) ,
A d j u s t y o u r s e a t ,
Press button M , t h e n b u t t o n 1 for a fi r s t d r i v i n g p o s i t i o n w i t h i n f o u r s e c o n d s .
Repeat the same actions on buttons M a n d 2 t o s t o r e a n o t h e r d r i v i n g p o s i t i o n .
A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i t i o n h a s b e e n m e m o r i s e d .
Memorising a new position cancels the
previous one.
Activating a memorised driving
position
Front heated seat controls
W h e n t h e e n g i n e i s r u n n i n g , t h e f r o n t s e a t s c a n b e h e a t e d s e p a r a t e l y .
U s e t h e a d j u s t m e n t c o n t r o l s l o c a t e d o n t h e s i d e o f e a c h f r o n t s e a t t o s w i t c h o n a n d s e l e c t t h e s e l f - r e g u l a t e d l e v e l o f heating:
1: Low.
2: M e d i u m .
3: High.
0: Off. A f t e r r e c a l l i n g a m e m o r i s e d p o s i t i o n fi v e t i m e s i n s u c c e s s i o n , t h e f u n c t i o n w i l l b e c a n c e l l e d u n t i l t h e e n g i n e i s s t a r t e d .
Engine running
Keep button 1 or 2 p r e s s e d d o w n u n t i l t h e e n d o f s e t t i n g o f t h e c o r r e s p o n d i n g m e m o r i s e d p o s i t i o n .
Engine off
B r i e fl y p r e s s b u t t o n 1 or 2 to recall t h e c o r r e s p o n d i n g m e m o r i s e d position.
Page 82 of 252
ERGONOMICS and COMFORT
3
87
Mirrors and windows
ELECTRIC WINDOWS
4. Rear left electric window switch.
5. Rear electric windows disarming switch (child safety).
- r e d s t r i p v i s i b l e : t h e r e a r s w i t c h e s a r e a c t i v a t e d .
- r e d s t r i p c o v e r e d : t h e r e a r s w i t c h e s a r e d i s a r m e d .
Y o u h a v e t w o o p t i o n s :
The electrical functions of the e l e c t r i c w i n d o w s a r e d i s a r m e d one minute after switching off the ignition.
Disarming the rear controls
F o r t h e s a f e t y o f y o u r c h i l d r e n , p r e s s switch 5 t o d i s a r m a l l o f t h e e l e c t r i c a l controls in the rear:
- e l e c t r i c w i n d o w s ,
- s l i d i n g s i d e d o o r s ,
- sunroofs.
1. Driver’s electric window switch.
2. Passenger electric window switch.
3. Rear right electric window switch.
Manual operation:
- press or pull switch 1 , w i t h o u t g o i n g
b e y o n d t h e p o i n t o f r e s i s t a n c e . T h e
w i n d o w s t o p s w h e n t h e s w i t c h i s
r e l e a s e d .
Automatic operation:
- press or pull switch 1 , b e y o n d t h e
p o i n t o f r e s i s t a n c e : t h e w i n d o w
opens or closes completely when
t h e s w i t c h i s r e l e a s e d . P r e s s i n g t h e
switch again stops the movement
o f t h e w i n d o w .
Page 107 of 252
11
2 2
3 3
11
2 2
111 TELEPHONE
ENTERING THE PIN CODE
Access the slot by pressing the button using the tip of a pen.
Install the SIM card in the holder and then insert it in the slot.
To remove the SIM card, repeat step 1.
Your SIM card must be installed and removed with the audio equipment switched off and the ignition off.
Enter the PIN code on the keypad.
C o n fi r m t h e P I N c o d e b y p r e s s i n g button #.
PIN CODE
When entering your PIN code, tick the STORE PIN ta b to gain access to the telephone without having to enter this code when it is used subsequently.
I N S T A L L I N G Y O U R S I M C A R D
(NOT SUPPLIED)
Page 141 of 252
0 7
1
3
5
4
2
1
2
141
The services offered by the telephone depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. Refer to your telepho ne’s manual and your operator to check which services you have access to. A list of mobile telephones which offer the best range of services is available from dealers.
BLUETOOTH TELEPHONE
CONNECTING A TELEPHONE
For safety reasons and because they require prolon gedonged attention on the part of the driver, the operations for pairing the Blue Bluetooth mobile telephone to the hands-free system of the WIP Nav m usv must be carried out with the vehicle stationary and the ignition on.
Activate the telephone’s Bluetooth function. The last telephone connected is reconnected automatically.
Select the TELEPHONE MENU f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
TELEPHONE MENU
Enter the authentication code on the telephone. The code to be entered is displayed on the screen.
To change the telephone connected, press the PHONE button, then select TELEPHONE MENU and press the d i a l t o c o n fi r m .
Once the telephone has been connected, the WIP Nav Nav can synchronise the address book and the call list. This syncis synchronisation may take a few minutes.
Select CONNECT PHONE. Select the t e l e p h o n e a n d p r e s s t o c o n fi r m . T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s on the multifunction display. Select the telephone requir required for a new connection.
Press the PHONE button.
F o r a fi r s t c o n n e c t i o n , s e l e c t SEARCH PHONE and press the dial t o c o n fi r m . T h e n s e l e c t t h e n a m e o f the telephone.
SEARCH PHONE
CONNECT PHONE
Page 156 of 252
11
2 2
3 3
11
2 2
5 511
0 4155 H A N D S - F R E E K I T
For safety reasons and because they require prolonged attention on the part of the driver, the operations for matching of the Bluetooth mobile telephone with the audio equipment hands-fre e kit must be carried out with the vehicle stationary and the ignition on.
Select the accessory which corresponds to the n a m e o f t h e v e h i c l e , a s u p e r i m p o s e d c o n fi g u r a t i o n display appears on the multifunction display.
Activate the telephone’s Bluetooth function and carry out a search of the Bluetooth accessories present for the telephone.
Select the YES tab on the display using t h e b u t t o n s t h e n c o n fi r m b y p r e s s i n g O K .
E n t e r t h e v e h i c l e ’ s a u t h e n t i c a t i o n c o d e ( = 1 2 3 4 ) . Depending on the telephone, you may be asked to enter this code before the superimposed c o n fi g u r a t i o n d i s p l a y a p p e a r s .
Y E S
Y E S
The services offered by the hands-free kit depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. C o n s u l t y o u r t e l e p h o n e ’ s m a n u a l a n d y o u r o p e r a t o r t o fi n d o u t w h i c h s e r v i c e s a r e available to you. A list of mobile telephones which offer the best range of services is available from the network. Consult a PEUGEOT deal er. Refer to the end of the "Correct use of the hands-free kit" paragraph.
R E C E I V I N G A C A L L
An incoming call is announced by a ring and a supe rimposed display on the multifunction display.
Select the YES tab on the display using t h e b u t t o n s a n d c o n fi r m b y p r e s s i n g O K .
Press the end of the steering wheel stalk to accept the call.
Press the end of the steering wheel stalk for more than two seconds to access your directory.
To dial a number, use the keypad on your telephone.
MAKING A CALL
D I S P L A Y C
MATCHING A TELEPHONE
Page 164 of 252
SAFETY
169
Driving safety
5
HANDBRAKE
HAZARD WARNING LIGHTS
Press the button, the direction
i n d i c a t o r s fl a s h .
They can operate with the ignition off.
Automatic lighting of hazard
warning lights
Equipment conditioned according
to country: when braking in an
emergency, depending on the
deceleration, the hazard warning lights
come on automatically. They switch
o f f a u t o m a t i c a l l y t h e fi r s t t i m e y o u
accelerate.
It is also possible to switch them off by
pressing the button.
DRIVING SAFETY
Applying
When parking, pull the handbrake to
immobilize your vehicle. When parking
on a slope, direct your wheels towards
the pavement and pull the handbrake.
Releasing
Pull on the handle and press the button
to release the handbrake. Pull the button located at the end of the
handbrake forwards.
The handbrake lever lowers.
You can now pivot the seat.
To return to normal operation, pull the
lever upwards until a click is heard.
If the handbrake is still on or has
not been released properly, this is
indicated by:
Disengaging
Apply the handbrake. a warning light which comes
on on the instrument panel,
an audible signal,
a message on the display.
Page 166 of 252
SAFETY
171
Driving safety
5
TRACTION CONTROL (ASR)
AND DYNAMIC STABILITY
CONTROL (ESP)
Activation of the ASR and ESP
systems
When the ignition is on, the ASR and
ESP systems are always active. Disarming the ASR/ESP systems
In certain conditions (vehicle stuck in
mud or snow, or on loose ground...),
it could prove useful to disarm the ASR
and ESP systems to make the wheels
spin and regain grip.
- Press the switch, situated under the
steering wheel on the right of the
fascia.
The indicator light comes on
accompanied by a message:
the ESP and ASR systems
no longer act on the engine
operation, but continue to act
on the brakes.
Operation of the ASR and
ESP systems
T h e w a r n i n g l i g h t fl a s h e s i f
the ASR or ESP is activated.
These systems are linked and
complement the ABS.
The ASR system optimises drive to
prevent the wheels skidding, by acting
on the brakes of the drive wheels
and on the engine. It also allows the
directional stability of the vehicle to be
improved on acceleration.
If there is a variation between the
trajectory followed by the vehicle and
that required by the driver, the ESP
system automatically acts on the
engine and the brake of one or more
wheels, in order to put the vehicle back
on course, within the limits of the laws
of physics.
They engage again:
- automatically above 30 mph (50 km/h),
- manually by pressing the switch again.
Operating check When a malfunction of the
systems occurs, the indicator
light comes on, accompanied
by an audible signal and a
message on the display.
Contact a PEUGEOT dealer to have
the system checked.
The ASR/ESP systems offer
increased safety during normal
driving, but should not incite the
driver to take risks or to drive at
high speed.
The operation of these systems is
ensured if the recommendations
of the manufacturer regarding
the wheels (tyres and rims), the
braking components, the electronic
c o m p o n e n t s a n d t h e fi t t i n g a n d r e p a i r
procedures within the PEUGEOT
network are observed.
After an impact, have the system
checked by a PEUGEOT dealer .
Page 168 of 252
SAFETY
173
Seat belts
5
FRONT AND REAR SIDE SEAT
BELTS
The front seats and the rear side seats
o f r o w 2 a r e fi t t e d w i t h p r e - t e n s i o n e r s
and force limiters. The lap strap must be positioned as
low as possible on the pelvis. The
chest strap must pass over the hollow
of the shoulder.
Check that the seat belt is fastened
correctly by pulling the strap. The force-limiting device reduces the
pressure of the seat belt against the
chest of the occupant, so increasing
his protection.
A bag placed on the front
passenger seat or a pet sitting on
this seat may trigger the lighting of
this warning light.
SEAT BELTS
Front seat belt warning light
If the driver and/or front
passenger has/have not
fastened his/their seat belt,
this warning light comes on.
Then, at a speed in excess of
approximately 15 mph (25 km/h), it
fl a s h e s a c c o m p a n i e d b y a n a u d i b l e
signal of increasing volume (for
approximately 90 seconds) and a
message on the display.
Row 2 rear side seat belts
For your comfort, if you are not using
the seat belt, slide the seat belt loop to
the upper stop to prevent the tongue
from vibrating.
To adjust the height
- To lower the attachment point,
squeeze control and slide it
downwards.
- To raise the attachment point, slide control upwards.
To fasten
- Pull the strap, then insert the buckle into the stalk.
- Check that the seat belt is secured correctly by pulling the strap. Inertia reel seat belts
T h e s e a r e fi t t e d w i t h a d e v i c e w h i c h
locks the seat belt automatically in
the event of an impact or emergency
braking.
Safety in the event of a frontal impact
has been improved by the introduction
of pre-tensioning and force-limiting
seat belts. Depending on the
seriousness of the impact, the pre-
tensioning system instantly tightens the
s e a t b e l t s fi r m l y a g a i n s t t h e b o d y o f t h e
occupant.
The pre-tensioning seat belts are
armed when the ignition is on.
Row 3 rear side seat belts
T h e r o w 3 r e a r s i d e s e a t s a r e fi t t e d
with two seat belts which are both
three-point inertia reel belts with force
limiter.