ignition Peugeot Bipper 2014.5 Owner's Manual - RHD (UK, Australia)

12
Bipper_en_Chap01_vue-ensemble_ed02-2014
INSTRUMENTS AND CONTROLS
Instrument panels, screens, dials ........25
Warning lamps, indicator lamps ......26-33
Indicators, gauge .......................... 34-35Steering wheel, adjustments

...........
53
Horn ...............................................
11 2
Dashboard / Centre console .......18-19
l

ighting controls


......................... 46-47
g

uide-me-home lighting


.................. 47
Parking lamps


.................................. 46
Cruise control


............................. 49-50
Configuration / Personalisation
of the vehicle


...........................84-87
Setting the time........................... 84-85
Headlamp beam height adjustment

... 47
l

ighting dimmer
............................... 35
Anti-slip regulation / Intelligent traction control


..................... 113-115
Reinitialisation of under-infaltion detection
.......

.............................. 11 7
Front/rear foglamps


......................... 47
Fuses

...................................... 167-169
Opening the bonnet
....................... 144 Starting, ignition switch


..............39, 59
Front/rear wipers


.............................48
Screenwash


.....................................48
trip computer

..................................83
e

lectric windows
..............................52
Door mirrors


.....................................51
Location

14
Bipper_en_Chap01_vue-ensemble_ed02-2014
INSTRUMENTS AND
CONTROLS
Steering wheel, adjustment .............53
Horn ............................................... 11 2
Dashboard / Centre console


.......20-21
l

ighting controls


......................... 46-47
g

uide-me-home lighting


.................. 47
Parking lamps


.................................. 46
Cruise control


............................. 49-50 Instrument panels, screens, dials
....
25
Warning laps, indicator lamps .... 26-33
Indicators, gauge
........................ 34-35
g

ear shift indicator

..........................58
Audio steering mounted controls / Hands-free kit


..................90, 93-110
Front/rear wipers


.............................48
Screenwash


.....................................48
trip computer

..................................83
Starting, ignition switch


..............39, 59
Configuration / Personalisation
of the vehicle


...........................84-87
Setting the time........................... 84-85
Adjusting headlamp beams


.............47
l

ighting dimmer
...............................35
Anti-slip regulation / Intelligent traction control


.....................113-115
Reinitialisation of under-inflation detection
.......

..............................11 7
Front/rear foglamps


.........................47
Fuses
......................................167-169
e

lectric windows
.............................. 52
Door mirrors


..................................... 51
Location

18
Bipper_en_Chap01_vue-ensemble_ed02-2014
Dashboard / Centre console
1. Door mirror controls.
2.
Front door glass demisting vent.
3.


Adjustable side vent.
4.

l ighting and direction indicator control
stalk.
5.

Instrument panel.
6.


Steering mounted audio system controls.
Bluetooth hands-free system.
7.


W
ash / Wipe /
trip computer control stalk.
8.


Centre adjustable air vents.
9.


Audio system.
10.


Windscreen demisting vent.
11

.
Passenger's front airbag.
12.

e lectric window controls.
13.
g love box.
14.

Heating / air conditioning controls.
15.

g ear lever.
16.
Ashtray.
17.

Cigarette lighter
.
18.

12V accessory socket.
19.


Parking brake.
20.


Ignition switch and steering lock.
21.


Driver's front airbag.


Horn.
22.

Steering wheel adjustment control.
23.


Bonnet release lever
.
24.
Fusebox.
25.

Cruise control.
Presentation

20
Bipper_en_Chap01_vue-ensemble_ed02-2014
Dashboard / Centre console
1. Front door glass demisting vent.
2.
Adjustable side vent.
3.


Passenger's front airbag.
4.


Adjustable centre vents.
5.


Audio system.
6.


Windscreen demisting vent.
7.

l ighting and direction indicator control
stalk.
8.

Instrument panel.
9.


Steering mounted audio system controls.
Bluetooth hands-free system.
10.


W
ash / wipe / trip computer control stalk.
11 .
Door mirror controls.
12.

e lectric window controls.
13.
Fusebox.
14.

Ignition switch and steering lock.
15.


Driver's front airbag.


Horn.
16.

Steering wheel adjustment control.
17.


Cruise control.
18.


Heating / air conditioning controls.
19.

g ear lever.
20.
Ashtray.
21.

Cigarette lighter
.
22.

12V accessory socket.
23.


Parking brake.
24.

g love box.
25.

Bonnet release lever
.
Presentation

26
Bipper_en_Chap03_pret-a-partir_ed02-2014
WARNING LAMPS
every time the engine is started: a series of warning lamps comes on appl\
ying a self-checking test.
t
hey go off almost immediately. When the engine is running: the warning lamp becomes a warning sign if\
it remains on continuously or
flashes.
t

his initial warning may be accompanied by an audible signal and a messag\
e in the screen. "Do not ignore these warnings."
Warning lampis indicates Solution - action
Service on temporarily. minor faults.
Contact a P
euge O t
dealer or a qualified

workshop.
continuously on,
accompanied by a
message in the screen. major faults. Make a note of the warning message and
contact a P
euge O t
dealer or qualified

workshop.
Parking brake
Brake fluid level on.
that the parking brake is applied or
has not been released correctly.Releasing the parking brake switches off the
warning lamp.
on. that the fluid level is too
low.
top up using a fluid recommended by


P
euge O t
dealers.
continuously on, even


though the level is
correct. Stop as soon as it is safe to do so. Park,
switch off the ignition and contact a
PEUGEOT dealer or qualified workshop.
l

ow engine oil level on.
that the level of oil in the
engine is too low. Check the engine oil level and contact a
P
euge O t
dealer or a qualified workshop.
continuously on, even


though the level is
correct. Stop as soon as it is safe to do so. Park,
switch off the ignition and contact a
PEUGEOT dealer or a qualified workshop.
Coolant temperature on with the needle in
the red zone.
an abnormal increase. Park and switch off the ignition, allow the system
to cool. Visually check the level.
on H in the red zone. the coolant temperature is
too high. "Checks -
l evels" section.
Contact a P
euge O t
dealer or a qualified

workshop.
Instruments and controls

27
Bipper_en_Chap03_pret-a-partir_ed02-2014
Warning lampisindicates Solution - action
e

ngine oil on while driving, with
a message in the
screen.
that the engine oil
pressure is too low.
Park and switch off the ignition and contact a
P
euge O t
dealer or a qualified workshop.
flashing, with a
message in the screen
(1.3 HDi 75 only). deteriorated engine oil.
Have the vehicle services as soon as possible to


avoid damage to the engine.
Battery charge on.
a fault in the charging
circuit. Check the battery terminals…
"Quick help - Battery" section.
continuously on, in
spite of the checks. an ignition or injection
fault. Contact a P
euge O t
dealer or a qualified

workshop.
Door open detection on.
that a door is not closed
correctly. Check that the front, rear and side doors are
closed.
accompanied by a
message in the screen.
Seat belt not fastened on then flashes.
that the driver has not
fastened his seat belt. Pull the strap then insert the tongue in the
buckle.
accompanied by an
audible signal then
remains on. that the vehicle is moving
with the driver's seat belt
unfastened. Check that the seat belt is fastened correctly by
pulling the strap.
"Safety - Seat belts" section.
flashing,
accompanied by an
audible signal the front passenger has
not fastened their seat
belt.
Pull on the strap and insert the tongue in the
buckle.
3
READY TO SET OFF
Instruments and controls

29
Bipper_en_Chap03_pret-a-partir_ed02-2014
Warning lampisindicates Solution - action
Wheel anti-spin
regulation on.deactivation of anti-slip
regulation (ASR). Manual selection.
"Safety - Driving safety" section.
Stop & Start on.a fault with the Stop &
Start. Have the system checked by a P
euge O t
dealer or a

qualified workshop as soon as possible.
Brake pads on.front brake pads worn. Have the brake pads replaced by a P
euge O t

dealer or a qualified workshop.
u

nder-inflation
detection on.
an under-inflated or
punctured tyre. Stop and switch off the ignition. Change the
wheel or repair the tyre.
flashes for a few
seconds, then stays
on. a fault with the system.
Have the system checked by a P
euge O t

dealer or a qualified workshop.
Rear parking sensors on, accompanied by


a message in the
screen. a fault with the system. Audible assistance is no longer active.
Have the system checked by a P
euge O t
dealer
or a qualified workshop as soon as possible.
e

lectronic gearbox on, accompanied by
a message in the
screen.
an incorrect operation by
the driver.
Repeat the desired operation.
flashing, accompanied by
an audible signal and a
message in the screen.a fault with the gearbox.Have the system checked by a P euge O t
dealer or a qualified workshop as soon as
possible.
3
READY TO SET OFF
Instruments and controls

30
Bipper_en_Chap03_pret-a-partir_ed02-2014
Warning lampisindicates Solution - action
e

lectronic anti-theft on.the ignition key introduced
is not recognised.
Starting impossible.
u

se another key and have the faulty key
checked by a P
euge O t
dealer
.
"Ready to set off - Access" section.
e

missions control
system flashing or on
continuously.
a fault with the system. Have it checked as soon as possible by a
P
euge O t
dealer or a qualified workshop.
l

ow fuel level on with the gauge
needle in zone
e .that the fuel reserve is
being used. Refuel without delay.
t

he assessment of the
fuel reserve is sensitive to the style of driving,
the profile of the road, the time elapsed and the
distance travelled since the warning lamp first
came on.
Particle filter on, accompanied by
an audible signal and a
message in the screen.the start of saturation of
the particle filter.
Regenerate the filter as soon as possible.
"Checks" section.
Presence of water in
the Diesel filter on, accompanied by
a message in the
screen.water in the Diesel fuel
filter. Have the filter bled by a P
euge O t
dealer or a

qualified workshop.
"Checks" section.
Diesel pre-heating on.that the weather
conditions impose pre-
heating (up to around
30 seconds in extreme
climatic conditions). Wait for the warning lamp to switch off before
operating the starter.
If the engine does not start, switch the ignition
off and on again, wait for the warning lamp to go
off, and start the engine.
Instruments and controls

34
Bipper_en_Chap03_pret-a-partir_ed02-2014
FUEL GAUGE
the fuel level is tested every time the
ignition is switched on.
If the gauge is positioned on:
-

f (full):
the capacity of the fuel tank is
approximately 45 litres.
-

e (empty):
the reserve is now being
used, the warning lamp comes on
continuously.
t

he low fuel warning first comes on when
approximately 6 litres of fuel is left.
COOLANT TEMPERATURE
- wait approximately 15 minutes to allow
the engine to cool down in order to check
the level and top it up if necessary.
t

he
cooling system is pressurised. In order to
avoid any risk of scalding, unscrew the
cap by two turns to allow the pressure to
drop.
When the pressure has dropped, check the
level and remove the cap to top up.
If the needle remains in the red zone, contact
a PEUGEOT or a qualified workshop.
EMISSION CONTROL
eOBD (european On Board Diagnosis) is a
diagnostics system which meets the exhaust
emissions standards for:
-

CO (carbon monoxide),
-


HC (unburnt hydrocarbons),
-


NOx (nitrous oxides) or particles detected

by oxygen sensors placed upstream and
downstream of the catalytic converters.
Refer to the "Checks -
l
evels" section. Refer to the "Checks -
l evels" section.
t

he driver is warned of any
fault with this emission control
system by flashing of this specific
warning lamp in the instrument
panel.
If the needle enters the red zone, or
if the warning lamp comes on:
The needle is positioned between c (cold)
and h (hot): normal operation.
In arduous conditions of use or hot climatic
conditions, the needle may move close to
the red graduations.
-

stop immediately

, switch off the ignition.
t

he cooling fan may continue to operate
for a certain time up to approximately
10

minutes.
Instruments and controls

35
Bipper_en_Chap03_pret-a-partir_ed02-2014
SERVICE INDICATORENGINE OIL WARNING LAMP
L IGHTING DIMMER
the dimmer is active when the sidelamps
are on.
Refer to the list of checks in the

warranty and maintenance record
which was given to you on delivery of
the vehicle.
After a few seconds, the screen returns to its
usual functions.
u

se these controls to adjust the
brightness of the instrument
panel and the audio system panel
lighting.
t

he screen in the instrument panel
informs you when the next service is due,
in accordance with the Manufacturer's
servicing schedule indicated in the warranty
and maintenance record.
t

his information
is determined in relation to the distance
travelled since the previous service. Low engine oil pressure
Oil deterioration (1.3 HDi 75 hp engine only)
t

he warning lamp comes on
continuously, accompanied by a
message in the instrument panel
screen, when the system detects
that the oil pressure is too low.
t

he warning lamp flashes,
accompanied by a message in the
instrument panel screen, when the
system detects deterioration of the
engine oil.
t

he flashing of this warning lamp
should not be considered as a fault wit the
vehicle, but rather as an indication to the
driver that the normal use of the vehicle now
requires that the oil be changed.
If the oil is not changed, when a
second level of deterioration is
reached, the emissions warning
lamp comes on in the instrument
panel and the engine speed is restricted to
3000 rpm.
to avoid damaging the engine, it is

recommended that the oil be changed
on flashing of the engine oil warning lamp.
Stop as soon as it is safe to do so: park,
switch off the ignition and contact a
PEUGEOT dealer or a qualified workshop. If the oil is still not changed, when a third
level of deterioration is reached, the engine
speed is restricted to 1500 rpm, so as to
avoid any damage.
3
READY TO SET OFF
Instruments and controls