bulb PEUGEOT BOXER 2015 User Guide

153
rear lamps
Carry out these operations in reverse order
to fit the new bulb.
1.
Brake lamps
type B, P21W - 21W
2.
Brake/sidelamps
type B, P

21/5W - 21W and 5W
3.
direction indicators
type B, PY

21W - 21W
4.
reversing lamps
type A, W16W - 16W
5.
Foglamp
type A, W16W - 16W -
Identify the failed bulb then open the
rear doors.
-
Remove the corresponding access cover
by removing the seven fixing screws

(van) or
Remove the corresponding access cover
by pulling on its grip to unclip it (combi).
-
Disconnect the electrical connector by
pressing on its central tongue.
-
Remove the two fixing nuts of the lens.
-
Pull the lens from the outside. -
Remove the six bulb holder fixing
screws.
-
Spread the three retaining tongues and
remove the bulb holder from its housing.
-
Change the bulb.
For more information on the bulbs,
refer to the table "
types of bulb or
lamp".
QuICK HeLP
8
Failed bulb or lamp

154
third brake lamp
type A, W5W - 5W (x 4)
-
Remove the two lamp fixing screws.
-
Remove the lamp by pulling it towards
you.
number plate lamps
type c, C5W - 5W
-
Press the point, indicated by the arrow,

then remove the plastic lens.
-
Remove the failed bulb by moving aside
the two contacts.
-
With the new bulb in place, ensure that
it is secured correctly between the two


contacts.
-
Replace the plastic lens and press on it
to lock it in place. -
Remove the bulb holder by squeezing
the two tabs.
-
Remove the failed bulb by pulling it out.
-
Change the bulb.
Failed bulb or lamp

251
PrESEntAtIon
Chassis cab and floor cab versions have a cab, a fixed floor and two spe\
cific rear lamp
clusters.
these versions are also available with:
-
a crew cab,
-
a tipper body.
changing a bulb
For more information on bulbs, refer to
the table "
types of bulb and lamp" in
the "Quick help" section.
rear lamps
Carry out the operations in reverse order to

refit each bulb.
1.
direction indicators
type B, PY21W - 21W
2.
Brake lamps
type B, P21W - 21W
3.
Sidelamps
type A, W5W - 5W
4.
reversing lamps
type A, W16W - 16W
5.
Foglamps
type A, W16W - 16W -
Identify the failed bulb.
-
Remove the four lamp unit fixing screws.
-
Pull the lamp unit out towards you.
-
Replace the bulb.
For more information on these versions, refer to the corresponding secti\
on.
SPeCIAL FeAtuReS
Chassis cab / Floor cab