brake light PEUGEOT BOXER DAG 2003 User Guide

17-11-2003
The ASR system optimises drive to prevent the wheels skidding, byacting on the brakes of the drivewheels and on the engine. It alsoallows the directional stability ofthe vehicle to be improved onacceleration.
Operation of the ASR systemWhen this system is operat- ing, this light flashes.
TRACTION CONTROL (ASR) This system is linked with and com-
plements the ABS. Disarming the ASR system In exceptional conditions (starting the vehicle when stuck in mud, on
snow, on unstable ground...), it may
prove useful to disarm the ASR sys-tem to allow the wheels to skid andregain grip. 
Press switch Ain the centre of
the fascia panel.
The indicator light on the switch and the warning light
come on: the ASR system willno longer act on the operationof the engine or the brakes. It will come into operation again: 
automatically above 20 mph (30 km/h),
 manually when the switch ispressed again.
Operating check When a malfunction of thesystem occurs, the warninglight on the instrument panelcomes on.
Contact a PEUGEOT dealerto have the system checked.
YOUR BOXER IN DETAIL 125
Normal operation of the ABS may make itself felt by slight vibrationsof the brake pedal. In emergency braking, press very firmly without releasingthe pressure.
The operation of the sys- tem is ensured to theextent to which the rec-ommendations of themanufacturer regarding
the wheels (tyres and wheel rims),the braking components, the elec-tronic components and the assem-bly and repair procedures withinthe PEUGEOT network areobserved. After an impact, have the system
checked by a PEUGEOT dealer.
Illumination of this warning light indicates a malfunctionof the electronic brake forcedistribution, which cancause a loss of control of
the vehicle when braking.
Stop immediately.
Contact a PEUGEOT dealer.

17-11-2003
The ASR system optimises drive to prevent the wheels skidding, byacting on the brakes of the drivewheels and on the engine. It alsoallows the directional stability ofthe vehicle to be improved onacceleration.
Operation of the ASR systemWhen this system is operat- ing, this light flashes.
TRACTION CONTROL (ASR) This system is linked with and com-
plements the ABS. Disarming the ASR system In exceptional conditions (starting the vehicle when stuck in mud, on
snow, on unstable ground...), it may
prove useful to disarm the ASR sys-tem to allow the wheels to skid andregain grip. 
Press switch Ain the centre of
the fascia panel.
The indicator light on the switch and the warning light
come on: the ASR system willno longer act on the operationof the engine or the brakes. It will come into operation again: 
automatically above 20 mph (30 km/h),
 manually when the switch ispressed again.
Operating check When a malfunction of thesystem occurs, the warninglight on the instrument panelcomes on.
Contact a PEUGEOT dealerto have the system checked.
YOUR BOXER IN DETAIL 125
Normal operation of the ABS may make itself felt by slight vibrationsof the brake pedal. In emergency braking, press very firmly without releasingthe pressure.
The operation of the sys- tem is ensured to theextent to which the rec-ommendations of themanufacturer regarding
the wheels (tyres and wheel rims),the braking components, the elec-tronic components and the assem-bly and repair procedures withinthe PEUGEOT network areobserved. After an impact, have the system
checked by a PEUGEOT dealer.
Illumination of this warning light indicates a malfunctionof the electronic brake forcedistribution, which cancause a loss of control of
the vehicle when braking.
Stop immediately.
Contact a PEUGEOT dealer.

17-11-2003
Rear lights
1 - Brake lights (P 21 W).
2 - Reversing lights (P 21 W).
3 - Direction indicators (PY 21 W).
4 - Fog lamps/Side lights (P 21/4 W). 
Unscrew the two bolts Aand
release the unit,
 Disconnect the connector B,
 Unscrew the two bolts Cat the
rear of the unit,
 Change the faulty bulb.
PRACTICAL INFORMATION
140
Number plate lights (C 5 W) Insert a thin screwdriver into one of the external holes of the lens.
 Push it outwards to unclip it.
 Remove the lens.
 Unscrew the bolt and release theassembly towards the right to
extract the bulb holder.
 Change the faulty bulb.
Chassis cab lights (W 5 W) Unscrew the four bolts to gain access to the bulbs.
Third brake light (W 5 W) 
Unscrew the 2 fixing screws.
 Release the lamp unit by push- ing it outwards.
 Disconnect the connector.
 Squeeze the two tabs to release
the bulb holder.
 Change the faulty bulb.
 When refitting, ensure that thelamp unit seal has been put back
in place correctly.

17-11-2003
PRACTICAL INFORMATION
142
Fuse no. Rating
Functions
12 5 A Front and rear right side lights.
13 5 A Front and rear left side lights.
24 5 A Number plate and trailer lights - Side lights warning light - Lights stalk.
25 7.5 A Audio equipment.
26 7.5 A Brake lights.
27 7.5 A Electric mirrors - Cruise control - Telephone - Chronotachograph -
Remote control - Alarm.
31 10 A Reversing lights - Front fog lamps relay - Air conditioning relay - Heated mirrors relay - Heated rear screen relay - 12 volt socket.
32 15 A Audio equipment.
33 7.5 A Rear fog lamp.
35 7.5 A ABI - Electric window controls.
36 Ð Not used.
37 10 A Instrument panel.
39 10 A Interior lighting - EOBD diagnostic socket.
42 7.5 A ABS.
43 20 A Wash-wipe pump.
44 15 A Lighter.
46 Ð Not used.
49 20 A Headlamp wash pump.
50 7.5 A Air bags.
51 10 A PCS (Minibus).
52 20 A Front power socket.
53 10 A Direction indicators - Hazard lights - Instrument panel.
55 30 A Passenger compartment electric ventilator - Webasto unit -
Heating/air conditioning ventilation - Webasto heating ventilation - Webasto supply.
62 Ð Not used.
Left-hand fuse box