headlamp PEUGEOT EXPERT 2023 Owners Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2023, Model line: EXPERT, Model: PEUGEOT EXPERT 2023Pages: 348, PDF Size: 12 MB
Page 4 of 348

2
Contents
  ■
OverviewOverview  4
  ■
Eco-driving
 1Dashboard instrumentsInstrument Panel  9
Head-up display  10
Warning and indicator lamps  12
Indicators  18
Distance recorders  23
Lighting dimmer  24
Trip computer  24
Touch screen  26
Remotely operable additional functions (Electric)  27
Setting the date and time  28
 2AccessElectronic key with remote control function and 
built-in key  29
Unlocking/Complete or selective unlocking  31
Back-up procedures  34
Central locking  37
Electric sliding side door(s)  38
General recommendations for  
the sliding side doors 
 39
Hands-free sliding side door(s)  42
Side-hinged rear doors  43
Tailgate  44
Tailgate rear screen  44
Alarm  45
Electric windows  47
 3Ease of use and comfortCorrect driving position  48
Front seats  48
2-seat front bench seat  50
Steering wheel adjustment  51
Mirrors  52
Moduwork  53
Precautions for the seats and bench seats  56
Fixed one-piece bench seat  57
Fixed rear seat and bench seat  59
Rear seat and bench seat on rails  61
Individual rear seat(s) on rails  63
Crew cab, fixed  65
Crew cab, folding  66
Interior fittings  67
Loading area fittings  71
Seating area fittings  72
Panoramic sunroof  74
Retractable sliding table  74
Heating and Ventilation  77
Heating  78
Manual air conditioning  78
Dual-zone automatic air conditioning  79
Front demisting - defrosting  81
Demisting/de-icing the rear screen  
and/or the door mirrors 
 82
Rear heating - air conditioning  82
Additional heating/ventilation system  83
Temperature pre-conditioning (Electric)  85
Courtesy lamp(s)  86
 4Lighting and visibilityLighting control stalk  88
Direction indicators  89
Daytime running lamps/Sidelamps  89
Automatic illumination of headlamps  89
Guide-me-home and welcome lighting  90
Automatic lighting systems - General 
recommendations 
 91
Automatic headlamp dipping  91
Headlamp beam height adjustment  92
Interior ambient lighting  93
Wiper control stalk  93
Automatic wipers  94
Changing a wiper blade  95
 5SafetyGeneral safety recommendations  97
Hazard warning lamps  97
Emergency or assistance  98
Horn  100
Pedestrian horn (Electric)  100
Electronic stability control (ESC)  100
Advanced Grip Control  102
Seat belts  103
Airbags  107
Child seats  109
Deactivating the front passenger airbag  111
ISOFIX and i-Size child seats  11 7
i-Size child seats  128
Manual child lock  131
Electric child lock  131
Child lock on rear windows  131
 6DrivingDriving recommendations  132
Starting/switching off the engine  134
Manual parking brake  138
Electric parking brake  138
Hill start assist  141  CarM an uals 2 .c o m  
Page 7 of 348

5
Overview
1.Locking/unlocking from the inside
2. Left-hand electric sliding side door
3. Electric child lock
4. Right-hand electric sliding side door
5. Hazard warning lamps
6. DSC/ASR system
7. Tyre under-inflation detection
8. Stop & Start (Diesel)
Side control bar 
 
 
 
1. Advanced Grip Control
2. Head-up display
3. Parking sensors
4. Additional heating/ventilation system (Diesel)
5. Alarm (Diesel or Electric)
6. Headlamp beam height adjustment
7. Lane departure warning system
8. Blind spot monitoring system
9. Automatic headlamp dipping
Electric motor 
 
1.Charging connectors
2. Traction battery
3. 12
  V accessory battery
4. On-board charger
5. Electric motor
6. Charging cable
The charging connectors
 
1
  allow 3   types of 
charging:
–
 
Domestic chargin
 g in mode   2 using a domestic 
socket and associated charging cable
 
6
 .
–
 
Accelerated charging in mode
   3 using an 
accelerated charging unit (Wallbox).
–
 
Superfast charging in mode
   4 using a fast 
public charger.
The 400
  V traction battery   2 uses Lithium-Ion 
technology. It stores and supplies the energy 
required for the operation of the electric motor, 
air conditioning and heating. Its charge level is  represented by an indicator and a reserve power 
warning lamp on the instrument panel.
The 12
  V accessory battery   3 powers the 
vehicle’s conventional electrical system. It is 
recharged automatically by the traction battery 
via the on-board charger.
The on-board charger  
4
  provides domestic 
charging (mode   2) and accelerated charging 
(mode   3) of the traction battery as well as 
recharging of the 12   V accessory battery.
The electric motor   5 provides propulsion in 
accordance with the selected driving mode and 
driving conditions. It recovers energy during 
vehicle braking and deceleration phases.
Labels
"Access - Side-hinged rear doors" section: 
 
"Ease of use and comfort - Moduwork" 
section:
 
 
 
 
 
   CarM an uals 2 .c o m  
Page 9 of 348

7
Eco-driving
Eco-driving
Eco-driving refers to a range of everyday 
practices that allow the motorist to optimise 
the vehicle's energy consumption (fuel and/or 
electricity) and CO
2 emissions.
Optimise your use of the gearbox
With a manual gearbox, move off gently and 
change up promptly. While accelerating, change 
up early.
With an automatic gearbox, favour automatic 
mode. Do not depress the accelerator pedal 
heavily or suddenly.
The gear shift indicator prompts you to engage 
the most suitable gear. Whenever this indication 
is displayed on the instrument panel, follow it 
straight away.
With an automatic gearbox, this indicator 
appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use 
engine braking rather than the brake pedal and 
press the accelerator gradually. These practices 
help to save on energy consumption, reduce 
CO
2 emissions and decrease general traffic 
noise.
When the traffic is flowing smoothly, select the 
cruise control.
Control the use of electrical equipment
Before moving off, if the passenger compartment 
is too warm, ventilate it by opening the windows 
and air vents before using the air conditioning.
At speeds above 31
  mph (50   km/h), close the 
windows and leave the air vents open.
Consider using equipment that can help keep 
the temperature in the passenger compartment 
down (e.g.
  sunroof blind, window blinds).
Unless automatically regulated, switch off the air 
conditioning as soon as the desired temperature 
has been reached.
Switch off the demisting and defrosting functions, 
if they are not managed automatically.
Switch off the heated seat as soon as possible.
Adapt your use of the headlamps and/or 
foglamps to the level of visibility, in accordance 
with current legislation in the country in which 
you are driving.
Avoid running the engine before moving off, 
particularly in winter (other than in severe wintry 
conditions: temperature below -23°C). The 
vehicle will warm up much faster while driving.
As a passenger, avoid connecting your 
multimedia devices (e.g.
  film, music, video 
game) to help reduce the consumption of energy.
Disconnect all portable devices before leaving 
the vehicle.
Limit the causes of excess consumption
Spread loads throughout the vehicle. Place the 
heaviest items in the boot as close as possible to 
the rear seats. Limit the loads carried in the vehicle and 
minimise wind resistance (e.g.
  roof bars, roof 
rack, bicycle carrier, trailer). Preferably, use a 
roof box.
Remove roof bars and roof racks after use.
At the end of winter, remove snow tyres and refit 
summer tyres.
Comply with the servicing instructions
Check tyre pressures regularly, with the tyres 
cold, referring to the label in the door aperture on 
the driver's side.
Carry out this check in particular:
–
 
before a long journey
 .
–
 
at each change of season.
–
 
after a long period out of use.
Do not forget the spare wheel and, where 
applicable, the tyres on your trailer or caravan.
Have your vehicle serviced regularly (e.g.
  engine 
oil, oil filter, air filter, passenger compartment 
filter, etc.). Observe the schedule of operations in 
the manufacturer's service schedule.
With a BlueHDi Diesel engine, if the SCR system 
has a fault, your vehicle will emit pollution. Visit 
a PEUGEOT dealer or a qualified workshop 
as soon as possible to restore your vehicle's 
nitrogen oxide emissions to legal levels.
When filling the fuel tank, do not continue after 
the third cut-out of the nozzle, to avoid overflow.
You will only see the fuel consumption of your 
new vehicle settle down to a consistent average 
after the first 1,900 miles (3,000 kilometres).  CarM an uals 2 .c o m  
Page 19 of 348

17
Dashboard instruments
1The engine power gradually decreases.
You must put the vehicle on charge.
If the warning lamp remains lit, carry out  (2).
Pedestrian horn (Electric)Fixed.
Horn fault detected.
Carry out (3).
Water in Diesel fuel filter (Diesel)Fixed (with LCD instrument panel).
The Diesel fuel filter contains water.
Carry out (2) without delay. Risk of damaging the 
fuel injection system!
Particle filter (Diesel)Fixed, accompanied by an audible signal 
and a message about the risk of particle 
filter blockage.
The particle filter is nearing saturation.
As soon as traffic conditions allow, regenerate 
the filter by driving at a speed of at least 37
  mph 
(60
 
km/h), with an engine speed of above 2,500 
rpm, until the warning lamp goes off.
Fixed, accompanied by an audible signal 
and a message indicating that the 
additive level in the particle filter is too low.
The low level in the additive tank has been 
reached.
Top up without delay: carry out (3).
Power steeringFixed.
The power steering has a fault.
Drive carefully at moderate speed, then carry 
out (3).
Rear foglampFixed.
The lamp is on.
Foot on the brakeFixed.
Insufficient or no pressure on the brake 
pedal.
With the automatic gearbox or the drive selector, 
it may be necessary to depress the brake pedal 
to unlock the gearbox from mode  N.
Foot on the clutchFixed.
Stop & Start: the change to START mode 
is rejected because the clutch pedal is not fully 
depressed.
Fully depress the clutch pedal.
Green warning/indicator lamps
Automatic wiping
Fixed.
Automatic windscreen wiping is activated.
Automatic headlamp dipping
Fixed.
The function has been activated 
via the vehicle’s configuration menu.
The lighting control stalk is in the "AUTO" 
position.
For more information, refer to the Lighting and 
visibility  section.
Stop & StartFixed.
When the vehicle stops, the Stop & Start 
system puts the engine into STOP mode.
Flashing temporarily.
STOP mode is momentarily unavailable 
or START mode is automatically triggered.
For more information, refer to the Driving 
section.
Vehicle ready to drive (Electric)Fixed, accompanied by an audible signal 
when it comes on.
The vehicle is ready to drive and the thermal 
comfort systems are available.
The indicator lamp goes out upon reaching a 
speed of approximately 3 mph (5
  km/h) and 
lights up again when the vehicle stops moving.
The lamp will go out when you switch off the 
motor and exit the vehicle.
Blind spot monitoringFixed.
The function has been activated.
Lane departure warningFlashing, accompanied by an audible 
signal.
A lane marking has been crossed on the left or 
right.
Turn the steering wheel in the opposite direction 
to return to the correct trajectory.
For more information, refer to the Driving 
section.  CarM an uals 2 .c o m  
Page 20 of 348

18
Dashboard instruments
Fixed, accompanied by an onscreen 
message.
The system has a fault.
Stay alert and drive carefully, then carry out (3).
Direction indicatorsFlashing with audible signal.
The direction indicators are on.
SidelampsFixed.
The lamps are on.
Dipped beam headlampsFixed.
The lamps are on.
Front foglampsFixed.
The front foglamps are on.
Blue warning/indicator lamps
Main beam headlamps
Fixed.
The lamps are on.
Black/white warning lamps
Foot on the brake
Fixed.
Insufficient or no pressure on the brake 
pedal.
With an automatic gearbox, with the engine 
running, before releasing the parking brake, to 
move out of position P.
Indicators
Service indicator
The service indicator is displayed on the 
instrument panel. Depending on the vehicle 
version:
–
 
the distance recorder display line indicates 
the distance remaining before the next service 
is due, or the distance travelled since it was due 
preceded by the sign “-”.
–
 
an alert message indicates the distance 
remaining, as well as the period before the next 
service is due or how long it is overdue.
Service spannerOn temporarily when the ignition is 
switched on.
Between 620 and 1,860 miles (1,000 and 3,000 
km) remain before the next service is due.
Fixed, when the ignition is switched on.
The next service is due in less than 620 
miles (1,000 km).
Have your vehicle serviced very soon.
Service spanner flashingFlashing then fixed, when the 
ignition is switched on.
(With
 
BlueHDi   Diesel engines, associated with 
the Service warning lamp.)
The servicing interval has been exceeded.
Have your vehicle serviced as soon as possible.
Resetting the service indicator
The service indicator must be reset after each 
service.
►
 
Switch the ignition off. 
 
 
 
► Press and hold this button.
►  Switch on the ignition; the distance recorder 
display begins a countdown.
►
 
Release the button when  =0
  is displayed; the 
spanner disappears.
If you have to disconnect the battery 
following this operation, lock the vehicle 
and wait at least 5 minutes for the reset to be 
registered.
Retrieving the service information
The service information can be accessed at any 
time.
►
 
Press this button.
The service information is displayed for a few 
seconds, then disappears.
The distance indicated (in miles or  kilometres) is calculated according to the   CarM an uals 2 .c o m  
Page 54 of 348

52
Ease of use and comfort
► When stationary, lower the control lever to 
release the steering wheel.
►
 
Adjust the height and reach.
►
 
Pull the control lever to lock the steering 
wheel.
As a safety precaution, these operations  must only be carried out while the vehicle 
is stationary.
Mirrors
Door mirrors
As a safety measure, the mirrors should  be adjusted to reduce the "blind spots".
The objects that you see in the mirrors are 
in fact closer than they appear. Take this 
into account in order to correctly judge the 
distance of vehicles approaching from behind.
 
 
► Move control  A to the right or to the left to 
select the corresponding mirror.
►
 
Move control 
 B in any of the four directions 
to adjust.
►
 
Return control  A
 to its central position.
Manual folding
The mirrors can be folded manually (parking 
obstruction, narrow garage, etc.).
► 
T
 urn the mirror towards the vehicle.
Electric folding
Depending on equipment, the door mirrors can 
be folded electrically.
► From the inside, with the 
ignition on, place control  A
 in the 
central position.
►
 
Pull control  A
 backwards.
►
 
Lock the vehicle from the outside.
If the mirrors are folded using control  A, 
they will not unfold when the vehicle is 
unlocked.
Electric unfolding 
The door mirrors are unfolded electrically when 
the vehicle is unlocked using the remote control 
or key. Unless folding was selected with control 
A, pull the control in the central position towards 
the rear again.
Folding/unfolding when locking/unlocking 
the vehicle can be deactivated. Contact a 
PEUGEOT dealer or a qualified workshop.
If necessary, the mirrors can be folded 
manually.
Heated mirrors 
 
 
 
► Press one of these buttons.
For more information on  Rear screen 
demisting/de-icing , refer to the 
corresponding section.
Rear view mirror
Equipped with an anti-dazzle system, which 
darkens the mirror glass and reduces the 
nuisance to the driver caused by the sun, 
headlamps of other vehicles, etc.  CarM an uals 2 .c o m  
Page 90 of 348

88
Lighting and visibility
Lighting control stalk
Main lighting 
 
 
 
Lamps off (ignition off)/
Daytime running lamps (engine running)
Automatic illumination of lamps/daytime  running lamps
Sidelamps only 
Dipped or main beam headlamps 
Headlamp dipping 
 
► Pull the lighting control stalk to switch 
between dipped and main beam headlamps.
In lamps off and sidelamps modes, pull the 
lighting control stalk to switch the main beam 
headlamps on directly ("headlamp flash").
Operation of the selected lighting is 
confirmed by the illumination of the 
corresponding indicator lamp.
Without AUTO lighting 
 
With AUTO lighting 
 
Foglamps
Rear foglamp
It only works if the sidelamps are on. 
 
 
► Rotate the ring forwards/backwards to turn 
it on/off.
When the lighting is switched off automatically 
(with 
AUTO model), the foglamp and the dipped 
beam headlamps will remain on.
Front foglamps/Rear foglamps
They operate with the sidelamps, dipped  or main beam headlamps on.
 
 
► Rotate the ring forwards:
•  once to switch on the front foglamps,
•
 
a second time to switch on the rear 
foglamps.
►
 
T
 urn in the opposite direction to switch off.
If the lighting is switched off automatically (with 
AUTO model) or the dipped beam headlamps 
are switched off manually, the foglamps and 
sidelamps remain on.
►
 
Rotate the ring backwards to switch the 
foglamps off; the sidelamps will then switch off.   CarM an uals 2 .c o m  
Page 91 of 348

89
Lighting and visibility
4Switching on the foglamps is prohibited 
in clear weather or in rain, both day and 
night. In these situations, the power of their 
beams may dazzle other drivers. They must 
only be used in fog or falling snow (rules may 
vary depending on country).
Do not forget to switch off the foglamps when 
they are no longer necessary.
Switching on the lamps after 
switching off the ignition
To reactivate the lighting control, rotate the 
ring to the "0" position - lamps off, then to the 
desired position.
If the driver's door is opened, a temporary 
audible signal warns the driver that the lamps 
are on.
They will go off automatically after a period 
of time that depends on the level of charge in 
the battery (entering energy economy mode).
Switching off of the lighting when the 
ignition is switched off 
When the ignition is switched off, all of the 
lamps turn off immediately, except for the 
dipped beam headlamps if automatic guide-
me-home lighting is activated.
In some weather conditions (e.g. low 
temperature or humidity), misting on the 
internal surface of the glass of the headlamps 
and rear lamps is normal, and will disappear 
after the lamps have been on for a few 
minutes.
Travelling abroad
If planning to use your vehicle in a 
country that drives on the other side of the 
road, the dipped beam headlamps must be 
adjusted to avoid dazzling oncoming drivers. 
Consult a PEUGEOT dealer or a qualified 
workshop.
Direction indicators 
 
► Left or right: lower or raise the lighting control 
stalk, beyond the point of resistance.
If you keep the direction indicators on for 
more than 20 seconds, the volume of the 
audible signal will increase if the speed is 
above 50 mph (80 km/h).
Three flashes
► Press briefly upwards or downwards, without 
going beyond the point of resistance; the 
direction indicators will flash 3 times.
Daytime running lamps/
Sidelamps
 
 
If the vehicle is so equipped, they come on 
automatically when the engine is started, when 
the lighting control stalk is in position " 0" or 
"AUTO".
Automatic headlamp  illumination
When a low level of ambient light is detected 
by a sunshine sensor, the number plate 
lamps,
  sidelamps and dipped beam headlamps 
are switched on automatically, without any action 
on the part of the driver. They can also come    CarM an uals 2 .c o m  
Page 92 of 348

90
Lighting and visibility
on if rain is detected, at the same time as the 
automatic rain sensitive wipers.
As soon as the brightness returns to a sufficient 
level or after the windscreen wipers are switched 
off, the lamps are switched off automatically.
Malfunction
In the event of a malfunction of the rain/sunshine 
sensor, the vehicle’s lamps come on and this 
warning lamp is displayed on the instrument 
panel, accompanied by an audible signal and/or 
the display of a message.
Have it checked by a PEUGEOT dealer or a 
qualified workshop.
Do not cover the rain/sunshine sensor 
located at the top centre of the 
windscreen behind the interior rear view 
mirror; the associated functions would no 
longer be controlled.
In fog or snow, the rain/sunshine sensor 
may detect sufficient light. For this 
reason, the lighting will not come on 
automatically.
The inner surface of the windscreen may  become misted up and affect the proper 
operation of the rain/sunshine sensor.
In humid and cold weather, demist the 
windscreen regularly.
Guide-me-home and 
welcome lighting
Guide-me-home lighting
Manual 
 
► With the ignition off, pull the lighting control 
stalk toward you ("headlamp flash") to activate/
deactivate the function.
Manual guide-me-home lighting goes off 
automatically after a period of time.
Automatic
With the "Automatic illumination of lamps" 
function activated (lighting control stalk in the 
"AUTO" position) and when the light is poor, the 
dipped beam headlamps come on automatically 
when the ignition is switched off.
With the ring in the "AUTO" position and when 
the light is poor, the dipped beam headlamps 
come on automatically when the ignition is 
switched off.
With audio system or touch screen
The activation, deactivation and  duration of guide-me-home lighting 
are set in the vehicle configuration menu.
Exterior welcome lighting
The remote operation of the lighting makes your 
approach to the vehicle easier in poor light. It 
is activated when the lighting control is in the 
"AUTO" position and the level of light detected 
by the sunshine sensor is low.
Switching on
Press this button on the remote control or 
on one of the front door handles with the 
"Keyless Entry and Start" system.
The dipped beam headlamps and sidelamps 
come on; your vehicle is also unlocked.
Switching off
The exterior welcome lighting switches off 
automatically after a set time, when the ignition 
is switched on or on locking the vehicle.
Programming
With audio system or touch screen
The activation, deactivation and  duration of the welcome lighting 
can be set via the vehicle configuration menu.   CarM an uals 2 .c o m  
Page 93 of 348

91
Lighting and visibility
4Automatic lighting systems - General 
recommendations
The automatic lighting systems use a detection 
camera, located at the top of the windscreen.
Operating limits
The system may be disrupted or not work 
correctly:
–
 
When visibility conditions are poor 
(e.g.
  snowfall, heavy rain).
–
 
If the windscreen is dirty
 , misted-up or 
masked (e.g.
  sticker) in front of the camera.
–
 
If the vehicle is facing highly reflective signs 
or safety barrier reflectors.
The system is not able to detect:
–
 
Road users that do not have their own 
lighting, such as pedestrians.
–
 
V
ehicles with hidden lighting (e.g.   travelling 
behind a safety barrier on the motorway).
–
 
V
ehicles at the top or bottom of a steep 
slope, on winding roads, on crossroads.
Maintenance
Clean the windscreen regularly, 
particularly the area in front of the camera.
The internal surface of the windscreen can 
also become misted around the camera. 
In humid and cold weather, demist the 
windscreen regularly.
Do not allow snow to accumulate on the 
bonnet or roof of the vehicle as this could 
obstruct the camera.
Automatic headlamp  dipping
For more information, refer to the 
General recommendations for 
automatic lighting systems.
With the ring of the lighting control stalk in the 
"AUTO" position and the function activated on 
the touch screen, this system automatically 
switches between dipped and main beam 
headlamps, according to lighting and traffic 
conditions, using a camera located at the top of 
the windscreen.
 
 
This system is a driving aid. The driver remains responsible for 
the vehicle's lighting, its correct use in the 
prevailing light, visibility and traffic conditions, 
and for compliance with driving and vehicle 
regulations.
The system becomes operational when  the vehicle exceeds 16 mph (25   km/h).
When the speed falls below 9 mph (15
  km/h), 
the function is no longer operational.
Activation/Deactivation
With audio system 
 
 
 
► To activate or deactivate the system, press 
this button.
The indicator lamp in the button is  
on
  when the 
function is activated.
With touch screen
The settings are adjusted via the vehicle  configuration menu.   CarM an uals 2 .c o m