ESP Peugeot iOn 2012 Owner's Manual - RHD (UK, Australia)

Familiarisation
4

Normal charging fl ap

This flap should be used to recharge your
vehicle from a domestic power point.
Fast charging fl ap
Available depending on equipment, this flap
should be used to recharge your vehicle from aspecial fast charging station.
8
286

Te m p o r a ry puncturerepair kit

This kit is a complete system consisting of a
compressor and a sealant cartridge, to allow
the temporary repair of a tyre.
92
Exterior
ASR and ESP systems
These are associated systems that assure the
directional stability of the vehicle, within the
limits of the laws of physics.
7
4

.Familiarisation
7
Instruments and controls
1.
Driver's airbag.
Horn. 2.Instrument panel.
3.Wiper stalk. 4. Side vents.
5. Window demisting vent.
6.Electric window switches and switch for deactivating the the front and rear passenger electric window controls.
7. Opening control for the fast charging flap (vehicle left hand side).8.Bonnet release lever.9.
Opening control for the normal charging flap (vehicle right hand side). 10.Fusebox.11.
Door mirror controls.12.
Headlamp height adjustment.
ASR/ESP deactivation switch.13.Steering lock and ignition switch.

Instruments and controls
18








Instrument panel Panel bringing together the various gauges and indicators for the operation of the vehicle.
1.State of charge gauge for the main battery.
Drive selector position indicator.2.Energy consumption / generationindicator.3.Speedometer.r4.Screen.
A.Total distance recorder.B.Trip distance recorder (Trip A or B).C.Instrument panel lighting dimmer.D.Indicator of distance remaining to the
next service.E.Indicator of time remaining to the next
service.F.Indicator of remaining range.
5.Screen control button. Displays the various functions in turn.
Resets the function selected (trip recorder or ser vice indicator).
Adjusts the level of instrument lighting.
For more information, refer to thecorresponding section.
Gauges and indicators

Screen

Instruments and controls
20
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel, this confirms that the corresponding system has come into operation.

Warning / indicator lampStateCauseAction / Observations



Left-hand direction indicatorFlashing with audible signal. The lighting stalk is pushed down.


Right-handdirection indicatorFlashing with audible signal. The lighting stalk is pushed up.


Hazard warning lampsFlashing with audible signal. The hazard warning lamps switch,located on the dashboard, has been
operated. The left-hand and ri
ght-hand direction indicators and
their associated indicator lamps flash simultaneously.


Sidelampsand/or dipped beamheadlamps
On fixed. The sidelamps and/or dipped beamheadlamps are on.



Front foglampsOn fixed. The front foglamps are switched on. Turn the ring on the stalk rear wards twice to switch off
the front foglamps.


Rear foglampOn fixed. The rear foglamp is switched on. Turn the ring on the stalk rear wards to switch off the
rear foglamp.


Main beam headlampsOn fixed. The lighting stalk is pulled towardsyou. Pull the stalk to return to dipped beam headlamps.

1
Instruments and controls
21
Warning / indicator lampStateCauseAction / Observations
Ready(ready to moveoff)
On fixed,
accompanied by an
audible signal when it
comes on. The vehicle is read
y to move off andyou can press the accelerator. The illumination period corresponds to the powering-
up of the vehicle.


Parking brake
On fixed. The parking brake is applied or notproperly released. Release the parking brake to switch off the warninglamp, keeping your foot on the brake pedal.
Obser ve the safety recommendations.
For further information on the parking brake, refer to
the "Driving" section.
Main batterycharge (normal or fast)
On fixed.The main battery is on charge. On completion of the charge, the lamp goes off.
Flashin
g. The charging cable is connected to
the vehicle but the main battery is not yet charging. Check the connection of the char
ging cable.

Instruments and controls
22
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.This is may be accompanied by an audible signal.
Warning / indicator lampStateCauseAction / Observations


Passenger's airbag systemOn fixed, on thecentre console. The control switch, located in the glove box, is set to the OFF
position.
The passenger's front airbag is deactivated.
Set the control switch to the ON
position to activate
the passenger's front airbag. In this case, do not fit achild seat in the rear-facing position.
Remember to check the state of the control switch
before star ting your vehicle.
ESP/ASROn fixed.The ESP/ASR off switch, located
in the dashboard (driver's side) is activated.
The ESP/ASR is deactivated.
ESP: electronic stability programme
ASR: anti-slip regulation.Pr
ess the button to activate the ESP/ASR.
The ESP/ASR system is automatically activated on star ting the vehicle.

Instruments and controls
24
Warning / indicator lampStateCauseAction / Observations
Electronic stabilityprogrammeand anti-slipregulation (ESP/ASR)
Flashing. Activation of the ESP/ASR systems. The systems optimise traction and improve the
directional stability of the vehicle.
Adapt your driving and moderate your speed.
On fixed. Fault in the ESP/ASR systems. Have it checked by a PEUGEOT dealer or a qualified
workshop.
+



Door(s) openOn fixed, accompanied by anaudible signal. A door or the boot is still open.
Close the door or boot.



Ancillariesbattery chargeOn fixed. The ancillaries battery chargingcircuit has a fault (dirty or loose
terminals, slack, transformer fault, ...).The warning lamp should go o
ff when the motor isstarted.
If it does not go off, contact a PEUGEOT dealer or
qualified workshop.
Electric power steeringOn fixed. The electric power steering has afault. Drive carefully at reduced speed.
Have it checked by a PEUGEOT dealer or a qualified
workshop.

Instruments and controls
28








Instrument panel screen When the ignition switch is in the " ON
" position, press button A
repeatedly to display the following information in turn.
Distance recorder
System for measuring the total distance
travelled by the vehicle during its life.Press button A.The total distance appears in the screen.

Reset to zero

With the ignition on and either trip Aor B
displayed, press the button for more than2 seconds.
Trip distance recorder (Trip A or B)
Each of these trip recorders indicates thedistance travelled since the last reset.
Press button A to display the desired trip.
Changing the speedometer units
With the total distance recorder displayed, press and hold button A
for a few seconds tochange the speedometer units (mph or km/h).

The range indicator is displayed in the units (miles or km) corresponding to thoseof the speedometer (mph or km/h).

Access
34
1. Driver's electric window.2.
Passenger's electric window.3.
Rear right electric window. 4.
Rear left electric window. 5.
Deactivating the passenger and rear electric window switches.










Electric windows


Operation

Deactivating the passenger and
rear electric window switches
FFor the safety of your children, press switch 5to prevent operation of the passenger and rear electric windows irrespective of their position. When the button is pressed down, the switches aredeactivated.
When the button is raised, the switches are activated.
System which opens or closes a window manually or automatically. It is fitted with a deactivation system to prevent misuse of the rear controls.
The electric window switches remainoperational for approximately30 seconds after the ignition isswitched off. The windows can no longer be opened or closed after the driver's door is closed. With the i
gnition on: F
Press the switch gently to open or pull it gently to close. The window stops as soonas the switch is released.


Always remove the key from the ignition when leaving the vehicle, even for a short time.
In the event of contact during operationof the windows, you must reverse the movement of the window. To do this,press the switch concerned.
When the driver operates the passenger electric window switches, they mustensure that no one is preventing correct closing of the windows.
The driver must ensure that passengersuse the electric windows correctly.
Be aware of children when operating the windows.
Automatic one-touch mode
(driver's side)F Press the switch fully to open. The driver's
window opens completely when the switch is released. F Pressing the switch again stops the
movement of the window.

Comfort
42





Door mirrors
The mirrors can be adjusted when the ignitionswitch is in the "ON" or "ACC" position. FMove control A
to the right or to the left to
select the corresponding mirror.FDirect control B in all four directions to adjust the mirror.
When adjustment is complete, return control Ato the central position.
Adjustment


The mirrors can also be foldedmanually.
However, you must never unfold them manually, other wise the mirrors may ynot remain in place correctly whendriving.
Always use control C
to unfold them.

F
With the ignition switch in the "ON"or "ACC" position: press control Cto unfold them .F
With the ignition switch in the "LOCK"
position: press control C within
30 secondsto fold them.
Electric folding / unfolding
*


*
Depending on version.