heating Peugeot iOn 2012 Owner's Manual

.
Contents
Instrument panel 18
Indicator and warning lamps 19
Main battery state of charge indicator 26
Energy consumption / generation
indicator 27
Distance recorder 28
Trip distance recorder 28
Lighting dimmer 29
Ser vice indicator 29
Range indicator 30
Instruments and controlsFamiliarisation
Remote control key 31
Electric windows 34
Doors 35
Boot 36
Charging fl aps 37
Access
Front seats 38
Rear seats 40
Mirrors 42
Interior fi ttings 44
V
entilation 47
Heating 49
Air conditioning 49
Rear screen demist - defrost 52
Comfort
Starting - stopping the vehicle 53
Manual parking brake 54
Drive selector
55
Driving
Lighting controls 57
Automatic illumination of headlamps 59
Headlamp adjustment 59
Wiper controls 60
Courtesy lamp 61
Visibility

Familiarisation
8
Instruments and controls
1. Steering lock and ignition switch.2.
Wiper stalk. 3.
Windscreen demisting vents.
4.
Glove box.Passenger's airbag deactivation.5.
Bonnet release lever.
6.Parking brake.
7. Drive selector. 8.12 V accessory socket. 9.
Heating / air conditioning controls.10.Emergency or assistance call.11.
Hazard warning switch.12 .Centre vents. 13.Audio system.

Familiarisation
12
Vent ilat ion


Air conditioning

Te m p e r a t u r e a d j u s t m e n t .

Air flow adjustment.
Air distribution ad
justment.
Air intake
/ Air recirculation.
"MAX"
button.
Air conditionin
g On / Off.
49
Heating / Ventilation

Familiarisation
14
Monitoring
1.
With the ignition on, the orange and red
warning lamps come on.2. With the engine running, these warninglamps go off.
I
f a warning lamp remains on, refer to the relevant page.
Warning lamps
19A
. "Neutral" position.
B. Energy consumptionC.
"Eco" zone.D."Charge" zone.


Energy consumption /
generation indicator
27

Four successive aler ts indicate that the energy
available in the main battery is dropping to a
low level:


- 2 bars of the energy gauge in the
instrument panel, on and
flashing :
starting to use the reser ve.

- The last bar in the energy gauge flashing.

- The last bar disappears:
display of the range disappears; the heatingand air conditioning are switched off.

Low energy alerts
- Display of this warning lamp in
the instrument panel:

Progressive reduction in the
power available from the motor.
26

.Familiarisation
17





For more economical driving, and increased range
Practical advice for everyday use to optimise the range of your vehicle by conser ving battery power.


Adopt a smooth driving
style

The electrical consumption of your vehicle
depends greatly on your journey, your driving style and your speed.
In all cases, adopt a smooth driving style.
Sta
y in the "Eco" zoneindicated in the energy consumption / generation meter: depress the
accelerator pedal progressively, without sudden movement, and if the conditions permit, drive at
steady and moderate speed.
Recover energy
Anticipating the driving conditions allows you torecover energy and increase the range of your
vehicle.
Use the "Charge" zoneof the energyconsumption / generation meter whenever possible: anticipate the traffic slowing
down and if the the conditions permit, use
deceleration rather than the brakes.


Control the use of your
electrical equipment

The heating and air conditioning systems operate on energy from the main battery.
Excessive use of these systems greatlyreduces the range of your vehicle. Remember
to switch them off once the desired level of comfor t is reached and check their settings every time you set off.
Control also the use of demisting / defrostingand the heated seat.


Limit the causes of excess
consumption
As with any vehicle, limit the loads carried
in the vehicle and reduce wind resistance (windows open above 30 mph (50 km/h), roof
bars, roof box, …).


Observe the
recommendations on
maintenance
Check the tyre pressures regularly andfollow the schedule for routine ser vicing
recommended by PEUGEOT.

Instruments and controls
26
Main battery state of charge indicator
Display

Four successive aler ts indicate that the energyavailable in the main battery is dropping to alow level:


- 2 bars of the state of charge gauge in the
instrument panel, on and flashing: star tingto use the reserve.

- The last bar in the state of charge gauge flashing.

- The last bar disappears: display of the
range disappears; the heating and air conditioning are switched off .

Low energy alerts
- Display of this warning lamp in
the instrument panel: progressive reduction in the power availablefrom the motor.
The state of char
ge of the main battery is displayed continuously in the instrument panel.

1
Instruments and controls
27





Energy consumption / generation indicator
Energy consumption
On switching on the ignition, your vehicleneither consumes nor generates energy in itselectric traction system: the needle is in the
"neutral" position (provided that the heating and
air conditioning are off).
"Eco" zone

A system that informs the driver of the level of energy consumption or generation of the main battery.


"Neutral" position

"Char
ge" zone
The needle moves to the right in proportion to
the energy consumption by the vehicle. The needle is in this zone when the vehicle is
used so as to moderate electric consumption
and optimise its ran
ge.
The needle moves to the le
ft in propor tion to
the level of charge sent to the main battery,
during period of deceleration and braking.

Instruments and controls
30
This function gives an estimate of the number
of miles (km) that your vehicle can still cover,
based on the recent conditions of use (driving style, use of heating, air conditioning...).
Range indicator
When the remaining range falls to a low level,"---"
is displayed in the instrument panel.
The display of "---", indicating that theservice date has arrived, comes on automatically after a cer tain time and distance travelled. The screen then indicates the time remaining before the next service is due.

Resetting the service indicator to zero
After each ser vice, the ser vice indicator shouldbe rest to zero.
The procedures is as follows: )Switch off the ignition (switch in the LOCK
or ACC position).
)Press the reset button A
several times in succession until the service indicator is
displayed. )Press and hold the reset button for a fewseconds until the spanner flashes.)Press the reset button while the spanner is flashing to change the display from "---"
to"CLEAR".The distance (or time) remaining before thenext ser vice is due is displayed.

Comfort
48
In order for these systems to be fully effective, follow the operation and maintenance guidelines below: )If the interior temperature remains very high after the vehicle has been parked in the
sun for a considerable time, first ventilate the passenger compar tment for a few minutesby opening the windows. Place the air flow control at a sufficient level to provide an adequate renewal of air in the passenger compartment.)Condensation created by the air conditioning results in a discharge of water under thevehicle when stationary, which is per fectly normal.)To obtain an even air distribution, take care not to obstruct the exterior air intake grilles located at the base of the windscreen, the nozzles, the vents and the air outlets, as wellas the air extractor located in the boot. )Use in preference the intake of exterior air as prolonged use of the air recirculation maycause misting of the windows and side windows.)Operate the air conditioning system for 5 to 10 minutes, once or twice a month to keep itin good working order. )Ensure that the passenger compar tment filter is in good condition and have the filter elements replaced regularly (refer to "Checks").)To ensure correct operation of the air conditioning system, you are also advised to have it checked regularly.)If the system does not produce cold air, do not use it and contact a PEUGEOT dealer or a qualified workshop.
Recommendations for ventilation and air conditioning

The heating and air conditioning useenergy from the main battery. Their useincreases electrical consumption and reduces the range of the vehicle.
Remember to switch off the heating or air conditioning as soon as it is no longer needed.

3
Comfort
49
Air conditioning
The air conditioning can be used as soon as
the "Ready" lamp is on. 1. Temperature adjustment
) Turn the dial from blue (cold) to red (hot) to adjust
the temperature to your requirements.


Adjustments can be made manually or automatically.1. Temperature 2.Air flow 3.Air distribution4.
Exterior air intake / Interior air recirculation
5. "Max" button
6
.Air conditioning On / Off



When the dial is placed on "●", the fanair will be at ambient temperature.
If you move the dial to "●" while usingthe heating or air conditioning, thesewill stop immediately.

Heating / Ventilation

The heating and ventilation can be used assoon as the "Ready" lamp is on.