bonnet Peugeot iOn 2015 Owner's Manual

.
.
Direction indicators 56
Automatic operation of brake lamps
5
6
Hazard warning lamps
5

6
Horn
57
Emergency or assistance call

5
7
Under-inflation detection
5

8
Braking assistance systems

6
2
Trajectory control systems

6
4
Front seat belts

6
5
Airbags


68
Safety
Child seats 7 2
Deactivating the passenger's front airbag
7
5
ISOFIX child seats

8
1
Child lock

8
4
Child safety
Charging the main battery 85
Ancillaries battery
9
3
Temporary puncture repair kit
9

7
Changing a wheel
1

01
Snow chains

1
05
Changing a bulb
1

06
Changing a fuse
1

14
Changing a wiper blade
1

19
Towing the vehicle

1
19
Precautions for washing

1
20
Accessories


120
Practical information
Bonnet 123
Front compartment
1
24
Rear compartment
1

25
Checking levels
1

26
Chec ks
12

8
Checks
Motor and main battery 129
Weights

13 0
Dimensions


131
Identification markings
1

32
Technical data
Emergency or assistance 133
Audio system / Bluetooth
1
35
Audio equipment and telematics
Visual search
Alphabetical index
Contents

88
Ion_en_Chap08_info-pratiques_ed01-2014
As a safety measure, the motor will
not start when the charging cable is
connected to the vehicle's socket.
Also, any attempt to start the motor
interrupts the charging procedure. It will
then be necessary to disconnect and
reconnect the charging cable plug to
continue charging.After charging, close the charging
socket cover and flap.
Take care to avoid the ingress of water
or dust to the socket and its cover
or the charging plug (risk of fire or
electrocution).
The charge lamp in the instrument panel going
off and flashing of the green CHARGING
lamp
indicate that charging is complete.
F

P

ress the button to remove the charging
plug.
F

R

efit the protective cover to the charging
cable.
F

C

lose the charging socket cover, then the
flap.
F

D

isconnect the charging cable from the
power point.
F

S

tow the charging cable in the bag
provided. If the 12V ancillaries battery is
discharged, it is not possible to charge
the main battery.
If you wear a pacemaker or other
electrical medical device, you must not
stay inside or near the vehicle during
charging.
It is also important that you take advice
from your doctor on the precautions to
take and observe.While charging, do not do anything
under the bonnet, even with the ignition
off, as the cooling fan may start at any
time (risk of injury).
You must wait for at least one hour
after the end of the charging procedure
before doing anything under the bonnet,
as some areas can be extremely hot
(risk of burns).
After removing the charging plug from
the vehicle's socket, do not leave
the cable connected to the electric
power point (risk of short circuit or
electrocution if it is contacted or
immersed in water).
Practical information

93
Ion_en_Chap08_info-pratiques_ed01-2014
Ancillaries battery
All of the electrical components of your vehicle
(other than the electric motor, the heating and
the air conditioning) are powered by this 12 V
ancillaries battery.
It is located in the front compartment and is
recharged by the main battery, during phases
of operation ("Ready" lamp on in the instrument
panel) and charging.If the ancillaries battery is discharged,
it will not be possible to start the
motor and the main battery cannot be
charged. F

O
pen the front bonnet using the interior
release lever, then the exterior safety catch.
F

S
ecure the bonnet stay.
F

S
lacken nut 1.
F

R
emove the battery protective cover for
access to the two terminals.Access to the battery
Disconnecting the battery is not
recommended.
However, if the vehicle is not to be
used for a prolonged period of more
than a month, it may be necessary to
disconnect and store it to avoid the
electrolyte freezing.
After prolonged disconnection of the
battery, you must contact a PEUGEOT
dealer or a qualified workshop to have
the electronic control unit reinitialised.
8
Practical information

107
Ion_en_Chap08_info-pratiques_ed01-2014
F Lift the cover B, using a screwdriver
protected by a cloth.
F

S
lacken fixing screw C until the head of the
screw touches the trim. F
R emove the bumper retaining clips, using a
screwdriver.
F

C
arefully lift the bumper.
To replace a failed bulb, you must first remove
the lamp.
To remove the lamp:
F

O

pen the bonnet.
F

P

ress tab A to release the connector.
Access to bulbs
8
Practical information

118
Ion_en_Chap08_info-pratiques_ed01-2014
Access to the fuses
F Open the bonnet (refer to the "Checks" section).
F

U
nclip the cover and remove it completely
by pulling towards you.
F

C
hange the fuse (refer to the
corresponding paragraph).
F

W
hen you have finished, close the cover
carefully to ensure sealing of the fusebox. Fuse N°
Rating Functions
11 10 AOn-board charger.
12 10 ADirection indicator.
13 10 AHorn.
14 10 ADaytime running lamps.
15 15 ABattery fan.
16 10 AAir conditioning compressor.
17 20 ARight hand dipped beam.
18 20 ALeft hand dipped beam, headlamp adjusters.
19 10 ARight hand main beam.
20 10 ALeft hand main beam.
Practical information

120
Ion_en_Chap08_info-pratiques_ed01-2014
Accessories
A wide range of accessories and genuine parts is available from the PEUGEOT dealer network.
These accessories and parts are all suitable for your vehicle and benefit from PEUGEOT's
recommendation and warranty.
Conversion kits
You can obtain an "Enterprise" kit to convert a
trade vehicle to a private car and vice-versa.
"Comfort":
black armrest, reading lamp, insulated
modules, rear parking sensors, cigarette
lighter, ashtray with base, head restraint
mounted coat hanger...
"Transport solutions":
boot liner, boot carpet, rear parcel shelf, boot
dividers...
"Security and safety":
alarm, wheel security bolts, child seats,
breathalyzer, warning triangle, high visibility
vest, first aid kit, snow chains, non-slip covers,
pet transport cage, pet safety belt...
Precautions for
washing
To avoid damaging the electrical
components, the use of a high pressure
jet wash is strictly prohibited:
-
i
n the front compartment (under the
bonnet),
-

u
nder the body.
For washing the body, do not use a
pressure greater than 80 bars. Check - before washing the vehicle -
that the charging flaps and the charging
socket covers (normal and fast charge)
are properly closed. Do not wash the vehicle while the
battery is being recharged.
Practical information

123
Ion_en_Chap09_verifications_ed01-2014
BonnetProtects the components in the front compartment and provides access for checking levels, charging the 12 V ancillaries battery, changing fuses, ...
F
P
ush the exterior safety catch B to the left
and raise the bonnet. F

O
pen the bonnet fully and on the right,
unclip the stay C from its holder.
F

F
it the stay C in one of the two notches to
hold the bonnet open.
F

O
pen the front right door.
F

P
ull the interior release lever A , located at
the bottom of the door aperture.
Opening Closing
F Take the stay out of the support notch.
F
C lip the stay in its housing.
F

L
ower the bonnet and release it at the end
of its travel.
F

P
ull on the bonnet to check that it is fully
latched.
Do not press down on the middle of
the bonnet if it does not fully close, as
there is a risk of deforming it. Open the
bonnet fully and close it again.
The location of the interior release lever
prevents opening of the bonnet while
the front right door is closed.
9
Checks

132
Ion_en_Chap10_caracteristiques-techniques_ed01-2014
Identification markingsVarious visible markings for the identification of your vehicle.
A.
S
er vice - Replacement Par ts
identification plate.
This plate is riveted to the underside of the
bonnet. Tyre pressures must be checked
when the tyres are cold, at least once
a
month.
Low tyre pressures increase the
electrical power consumption of your
vehicle, which reduces its range.
B. Tyre identification label.
This label is affixed to the driver's centre pillar.
It bears the following information:
-

t
he tyre pressures (in bars),
-
t

he tyre specification,
-

t
he type of tyre.C. Manufacturer's plate
.
This plate is riveted to the left hand centre
pillar.
D. Vehicle identification number (VIN).
This number is is engraved on the inner wheel
arch, inside the boot, right hand side.
For information on fitting snow chains,
contact a PEUGEOT dealer or a
qualified workshop.
It bears in particular the following information:
-

t
he vehicle model,
-

t
he paint code,
-

t
he type, variant, version.
Technical data

161
Ion_en_Chap12_recherche-visuelle_ed01-2014
Electric windows 29
Dashboard fuses
1
15-117
Ventilation

40-41
Heating

42- 44
Air conditioning
4
2- 44
Front demisting / defrosting
4
5
Rear screen demisting / defrosting 45
12 V accessory socket
3
8
Parking brake

4
8
Rear view mirror

3
6
P
E
UGEOT
C
onnect USB
3
9 Opening the bonnet

1
23
Instruments and controls
Opening the charging flaps 30 Audio system
1
36 -158
Drive selector
49
-50
.
Visual search

163
Ion_en_Chap12_recherche-visuelle_ed01-2014
Technical data - Maintenance
Front compartment 124
Checking levels 1 26-127
-
anc

illaries battery
electrolyte
-

b
rake fluid
-

h
eating system fluid
-

s
creenwash fluid
Chec ks


128
Changing front b u l b s
1

0 6 -111
Ancillaries battery
9

3-96 Opening the bonnet

1
23
Electric motor

1
29Weights


13 0
Rear compartment
1

25
Checking the coolant level


127
Front compartment f u s e s
11

4 , 117-118 Dimensions


131
Identification markings
1

32
.
Visual search