Peugeot iOn 2017 Owner's Guide
Manufacturer: PEUGEOT, Model Year: 2017, Model line: iOn, Model: Peugeot iOn 2017Pages: 174, PDF Size: 5.41 MB
Page 31 of 174

29
Ion_en_Chap02_ouvertures_ed01-2016
Boot
Opening
F After unlocking the vehicle using the remote control or the key, press the 
handle
 
A and open the tailgate. F
 P ull the handle B downwards to guide the 
tailgate down,
F
 
r
 elease the handle and press the exterior 
sur face of the tailgate gently to close it.
Closing
2 
Access  
Page 32 of 174

30
Ion_en_Chap02_ouvertures_ed01-2016
1. Driver's electric window.
2. Passenger's electric window.
3.
 R
ear right electric window.
4.
 R
ear left electric window.
5.
 D
eactivating the passenger and rear 
electric window switches.
Electric windows
Operation
Deactivating the passenger and 
rear electric window switches
F For the safety of your children, press switch 5 
t o prevent operation of the passenger and rear 
electric windows irrespective of their position.
When the button is pressed down, the switches are 
deactivated.
When the button is raised, the switches are activated.
System which opens or closes a window manually or automatically. It is fitted with a deactivation system to prevent misuse of the rear controls.
The electric window switches remain 
operational for approximately 
30 seconds after the ignition is 
switched
 
off.
The windows can no longer be opened 
or closed after the driver's door is 
closed.
With the ignition on:
F
 
P
 ress the switch gently to open or pull it 
gently to close. The window stops as soon 
as the switch is released.
Always remove the key from the ignition 
when leaving the vehicle, even for a 
short time.
In the event of contact during operation 
of the windows, you must reverse the 
movement of the window. To do this, 
press the switch concerned.
When the driver operates the 
passenger electric window switches, 
they must ensure that no one is 
preventing correct closing of the 
windows.
The driver must ensure that passengers 
use the electric windows correctly.
Be aware of children when operating 
the windows.
Automatic one-touch mode (driver's side)
F
 
P
 ress the switch fully to open. The driver's 
window opens completely when the switch 
is released.
F
 
P
 ressing the switch again stops the 
movement of the window. 
Access  
Page 33 of 174

31
Ion_en_Chap02_ouvertures_ed01-2016
Charging flaps
F Pull control A located at the bottom of the dashboard, driver's side, to release the 
charging flap.
Normal charging
F Pull control C located under the driver's seat, on the door side, to release the flap.
Fast charging*
For more information on Charging 
the main battery , refer to the 
corresponding section.
F
 
O
pen the access flap on the right of the 
vehicle.
F
 
P
ress latch B to open the socket cover. * Depending on equipment.
F
 
O
pen the flap on the left of the vehicle.
F
 
P
ress latch D to open the socket cover.
2 
Access  
Page 34 of 174

32
Ion_en_Chap03_ergonomie-et-confort_ed01-2016
Front seats
Manual adjustments
1. Adjustable head restraint
2. Adjustment of the backrest angle 
 O
perate the control lever and adjust the 
position of the backrest to the front or to 
the rear.
3.
 A
djustment of the driver's seat height  
 R
aise or lower the control lever the number 
of times required to obtain the desired 
position.
4.
 F
orwards-backwards adjustment of the 
seat position  
 L
ift the control bar and slide the seat 
forwards or backwards. 
Ease of use and comfort  
Page 35 of 174

33
Ion_en_Chap03_ergonomie-et-confort_ed01-2016
Head restraint height adjustment
F To raise it, pull upwards.
F T o lower it, push it downwards, pressing 
the height adjustment button at the same 
time.
F
 
T
 o remove it, raise it to the high position, 
then remove it pressing the height 
adjustment button at the same time.
F
 
T
 o refit it, engage the rods of the head 
restraint in the apertures, pressing the 
height adjustment button at the same time. Never drive with the removed head 
restraints in the vehicle as they could 
be thrown around the vehicle on sharp 
braking. They must always be in place 
and adjusted correctly.
After installing the head restraint, check 
that the height adjustment button has 
engaged correctly.
The adjustment is correct when the top 
of the head restraint is aligned with the 
top of the head of the seated person.Press the control switch, located on the 
dashboard, to switch on the driver's seat 
heating.
The warning lamp in the switch comes on.
The temperature is controlled automatically.
Pressing a second time stops operation.
Heated seat control
3 
Ease of use and comfort  
Page 36 of 174

34
Ion_en_Chap03_ergonomie-et-confort_ed01-2016
Rear seats
Rear head restraints
These have a high position (comfort and best 
safety) and a low position (best rear vision for 
the driver).
They can also be removed.
To remove a head restraint:
F 
p
 ull the head restraint fully upwards,
F
 
t
 hen, press the lug.When carrying rear passengers, never 
drive with their head restraints removed; 
ensure that they are in place and in the 
high position.
Do not use the function if the seat is not 
occupied.
Reduce the level of heating as soon as 
possible.
Once the seat and passenger compartment 
are at a comfortable temperature, you can 
switch off the function; reducing electric 
current consumption also reduces fuel 
consumption.
Prolonged use at the highest setting is not 
recommended for those with sensitive skin.
There is a risk of burns for those that do 
not have normal perception of heat (illness, 
taking medicines, etc.).
There is a risk of overheating the system if 
material with insulating properties is used, 
such as cushions or seat covers.
Do not use the system:
-
 
i
f wearing damp clothing,
-
 
i
f child seats are fitted.
To avoid breaking the heating element in 
the seat:
-
 
d
o not place heavy objects on the seat,
-
 
d
o not kneel or stand on the seat,
-
 
d
o not place sharp objects on the seat,
-
 d
o not spill liquids onto the seat.
To avoid the risk of short-circuit:
-
 
d
o not use liquid products for cleaning 
the seat,
-
 n
ever use the heating function when 
the seat is damp. Rear seat comprising two adjustable, foldable 
backrests and a fixed cushion. 
Ease of use and comfort  
Page 37 of 174

35
Ion_en_Chap03_ergonomie-et-confort_ed01-2016
Adjusting the backrest 
angle
To adjust the backrest:
F p ull the control for wards to release the 
backrest,
F
 
a
 djust the backrest then release the 
control.
The backrest can be adjusted to one of seven 
positions.
Always ensure that the backrest has 
engaged correctly.
Returning the seat backrest to its original position
F push the seat backrest in position and secure it,
F
 
r
 efit the head restraints or put them back 
in
 
place.
1.
 p
lace the head restraints in the low position 
or remove them if necessary,
2.
 p
ull the control for wards to release 
backrest,
3.
 f
old the backrest for ward.
Folding the backrest
When returning the backrest to its 
original position, take care not to trap 
the seat belts.
3 
Ease of use and comfort  
Page 38 of 174

36
Ion_en_Chap03_ergonomie-et-confort_ed01-2016
Mirrors
Adjustment
The mirrors can be adjusted when the ignition 
switch is in the "ON" or "ACC" position.
F 
M
 ove control A to the right or to the left to 
select the corresponding mirror.
F
 
D
 irect control B in all four directions to 
adjust the mirror.
When adjustment is complete, return control A 
to the central position.
Door mirrors
The mirrors can also be folded 
manually.
However, you must never unfold them 
manually , otherwise the mirrors may 
not remain in place correctly when 
driving.
Always use control C to unfold them.
Electric folding / unfolding*
F With the ignition switch in the "ON" or  "ACC" position: press control C to unfold 
them.
F
 
W
 ith the ignition switch in the "LOCK" 
position: press control C within 
30
 
seconds  to fold them.
* Depending on version. 
Ease of use and comfort  
Page 39 of 174

37
Ion_en_Chap03_ergonomie-et-confort_ed01-2016
Rear view mirror
Adjust the mirror by moving it up or down and/
or to the left or right.
The rear view mirror has two positions:
- 
d
 ay (normal),
-
 
n
 ight (anti-dazzle).
To change from one to the other, push or pull 
the lever on the lower edge of the mirror.
3 
Ease of use and comfort  
Page 40 of 174

38
Ion_en_Chap03_ergonomie-et-confort_ed01-2016
Interior fittings
1. Glove box
2. Retractable cup holder  
 P
ress the cover to open the cup holder
3.
 1 2
 V accessory socket  (120 W ) 
 O
bserve the maximum power rating to 
avoid damaging your accessory
4.
 O
pen storage
5.
 P
EUGEOT
 C
 onnect USB
6.
 Doo
r pocket 
Ease of use and comfort