light Peugeot iOn 2018 Owner's Manual

2
.
.
Instrument panel 7
W arning and indicator lamps 7
M
ain battery state of charge indicator
1
4
Energy consumption/generation indicator
1

4
Instrument panel display screen

1
5
Instruments and controls

4
R
emote control key
1
9
Doors

21
Boot
2
1
Electric windows
2
2
Charging flaps
2
3
Front seats
2
4
Rear seats
2

5
Mirrors
26
Interior fittings

2
7
Ventilation
2

9
Recommendations for ventilation and air
conditioning
3

0
Heating
3

1
Air conditioning

3
2
Front demist – defrost

3
4
Rear screen demist – defrost

3
4
Remote control

3
4Lighting control stalk

4
0
Headlamp beam height adjustment
4
2
Wiper control stalk
4
2
Courtesy lamp
4
3
General safety recommendations
4
5
Hazard warning lamps
4

6
Brake lamps, automatic operation
4

6
Horn


46
Horn for pedestrians

4
6
Emergency or assistance call
4

7
Braking assistance systems

4
8
Trajectory control systems

4
9
Engine brake reduction indicator lamp

5
0
Seat belts
5

1
Airbags


54
Child seats

5
7
Deactivating the passenger's front airbag
5

8
ISOFIX mountings and child seats

6
3
Advice on child seats

6
6
Child lock

6
7
Over view
Dashboard instruments Access
Ease of use and comfort Safety
Lighting and visibility
Eco-driving
Contents

5
Instruments and controls (continued)1
Instrument panel
Warning and indicator lamps
Indicators:
-
m
ain battery state of charge indicator
-
e

nergy consumption/generation indicator
-


speedometer
-

t
otal distance recorder
-

t
rip distance recorder
-

l
ighting dimmer
-

s
er vice indicator
-

r
ange indicator
2
Lighting control stalk
Direction indicators
Automatic illumination of brake lamps
3
Door mirrors
Headlamp adjustment
Horn for pedestrians
4
Wiper control stalk
5
Hazard warning lamps
6
Emergency or assistance call
7
Ignition switch, starting/
switching off the vehicle
8
Horn
.
Over view

7
Instrument panel
Dials
1.Main battery state of charge indicator.
Reminder of the drive selector position.
2. Energy consumption/generation indicator.
3. Speedometer.
Engine brake temporary reduction
i n d i c a t o r.
4. Display screen.
Display screen
A.Total distance recorder.
B. Trip distance recorder ( journey A or B).
C. Instrument panel lighting dimmer.
D. Distance remaining until service due.
E. Time remaining until service due.
F. Under-inflation detection.
G. Remaining range indicator.
Warning and indicator lamps
Visual identifiers informing the driver that
a system is in operation, switched off (on/
off indicator lamps) or has developed a fault
(warning lamp).
When the ignition is switched on
Certain warning lamps come on for a few
seconds when the vehicle's ignition is switched
on.
When the vehicle is started, these same
warning lamps should go off.
If they remain on, before driving refer to the
information on the warning lamp concerned.
Associated warnings
The illumination of certain warning lamps may
be accompanied by an audible signal.
There are two types of lighting for warning
lamps, fixed (continuous) or flashing.
Certain warning lamps may come on in
one of two modes. Only by relating the
type of lighting to the operating status of
the vehicle can it be ascertained whether
the situation is normal or whether a fault
has occurred.
5.
Display screen management button.
Displays the different functions
su c c e s s i ve l y.
Resets the selected function to zero (trip
distance recorder or service indicator).
Sets the lighting dimmer intensity.
Panel that brings together the different dials
and vehicle operation indicator lamps.
1
Dashboard instruments

8
Warning lamps
When the engine is running or the vehicle is
being driven, the lighting of one of the following
warning lamps indicates a fault which requires
action on the part of the driver.
Any fault resulting in the lighting of a warning
lamp must be investigated further.
If you encounter any problems, contact a
PEUGEOT dealer or a qualified workshop.
Operation indicator lamps
The lighting of one of the following indicator
lamps confirms that the corresponding system
is on.
This may be accompanied by an audible signal.
Deactivation indicator lamps
If one of the following indicator lamps comes
on, this confirms that the corresponding system
has been switched off intentionally.
This may be accompanied by an audible signal.
Dashboard instruments

10
Warning/indicator lampStateCause Action/Observations
Door(s) open/Boot
open Fixed, accompanied
by an audible signal. A door or the boot is still open. Close the door or boot.
Parking brake Fixed. The parking brake is applied or
not properly released. Release the parking brake to switch off the warning
light, keeping your foot on the brake pedal.
Observe the safety recommendations.
For more information on the Parking brake
, refer to
the corresponding section.
Braking Fixed. The brake fluid level has
dropped significantly.
There is a braking assistance
system fault. Stop as soon as it is safe to do so.
Top up with brake fluid approved by PEUGEOT.
If the problem persists, have the system checked by a
PEUGEOT dealer or a qualified workshop.
+ Fixed, associated
with the ABS warning
lamp.
The electronic brake force
distribution (EBFD) system is
faulty. You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Anti-lock Braking
System (ABS) Fixed.
The anti-lock braking system
has a fault. The vehicle retains conventional braking capabilities.
Drive carefully at reduced speed and contact a
PEUGEOT dealer or a qualified workshop without
d e l ay.
Orange warning/indicator lamps
Dashboard instruments

12
Under-inflationFixed. The pressure in one or more of
the tyres is too low. Check the pressure in the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
You must reinitialise the system after adjusting one or
more tyre pressures and after changing one or more
wheels.
For more information on Tyre under-inflation
detection
, refer to the corresponding section.
Flashing, then fixed. The function is faulty and/or at
least one of the wheels has no
sensor detected. Tyre pressure monitoring is no longer ensured.
Have the system checked by a Peugeot dealer or a
qualified workshop.
Warning/indicator lamp
StateCause Action/Observations
Main electrical
system self-
diagnostic system Fixed.
Fault in the main electrical
system. You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Passenger's airbag
system Fixed, in the central
console.
The control switch, located in the
glove box or in the central console
(depending on equipment), is set
to the "
OFF" position.
The passenger's front airbag is
deactivated.Set the control switch to the " ON" position to activate
the passenger's front airbag.
In this case, do not install a "rear ward facing" child
seat on the front passenger seat.
Remember to check the status of this control switch
before starting your vehicle.
Rear foglamp Fixed. The rear foglamp has been
switched on using the ring on the
lighting control stalk. Turn the ring on the lighting control stalk to the rear to
switch off the rear foglamp.
Dashboard instruments

13
Warning/indicator lampStateCause Action/Observations
Left-hand direction
indicator Flashing with audible
signal. The lighting control stalk has been moved
down.
Right-hand
direction indicator Flashing with audible
signal. The lighting control stalk has been moved
up.
Hazard warning
lamps Flashing with audible
signal. The hazard warning lamps switch, located
on the dashboard, has been operated.
The left-hand and right-hand direction indicators and
their associated lamps flash simultaneously.
Sidelamps and/
or dipped beam
headlampsFixed.
The sidelamps and/or dipped beam
headlamps have been switched on.
Front foglamps Fixed. The front foglamps have been switched on
using the ring on the lighting control stalk. Turn the ring on the lighting control stalk
twice rear wards to switch off the front
foglamps.
Main beam
headlamps Fixed.
The lighting control stalk has been pulled
towards you. Pull the lighting control stalk to return to
dipped beam headlamps.
Motor braking
reduction Flashing.
The main battery is fully charged, the motor
braking is temporarily reduced. Anticipate when you need to brake: use
the brake pedal to slow down or stop the
vehicle.
Ready
(ready to drive)
Fixed, accompanied by
an audible signal when
it comes on.The vehicle is ready to drive, you can
operate the accelerator now.
The lamp stays on as long as the vehicle is
powered up.
Green warning/indicator lamps
Black warning/indicator lamps Blue warning/indicator lamps
1
Dashboard instruments

16
Lighting dimmer
System that allows the brightness of the
instruments and controls to be adjusted
manually to suit the ambient light level.
With the headlamps on or off, press button A to
select the function, then hold it down to adjust
the brightness of the instruments and controls
lighting to "day" or "night".
The brightness of the lighting increases every
time you press button A.
When the lighting reaches the maximum
setting, press again to move to the minimum
setting.
Release button A as soon as the lighting
reaches the desired brightness.
The setting is registered as soon as you
release button A and is stored when the ignition
switch is turned to OFF.
Service indicator
System which informs the driver when the
next ser vice is due, in accordance with the
manufacturer's servicing schedule.
This due date is calculated from the last reset
of the service indicator.
There are two different ways to indicate when
the next ser vice is due:
-

r
emaining distance (in kilometres or miles),
-

t
ime (in months) left before the next
service.
Once the ignition is switched on, press
button
A successively until the ser vice indicator
is displayed in the desired units.
Operation
1. The display shows the distance or time
remaining before the next service.
2. The display shows that the ser vice is due.
Each time the ignition is switched on, the
ser vice spanner is displayed for a few
seconds to notify you that the ser vice
must be carried out very soon.
3. Once the ser vice has been completed,
the distance or the time remaining before
the next ser vice is displayed.
Dashboard instruments

40
Lighting control stalk
Main lighting
The various front and rear lamps of the vehicle
are designed to adapt the lighting gradually to
the climatic conditions and thus give the driver
better visibility:
-
s
idelamps, to be seen,
-

d
ipped beam headlamps to see without
dazzling other drivers,
-

m
ain beam headlamps to see clearly when
the road is clear.
Additional lighting
Other lamps are fitted to meet particular driving
conditions:
-

a r
ear foglamp to be seen from afar,
-
f

ront foglamps for even greater visibility,
-

d
aytime running lamps to be seen during
t h e d ay.
Selection ring for main
lighting mode
Turn it to align the desired symbol with the
mark.
Dipped or main beam headlamps.
Sidelamps.
Automatic illumination of headlamps.
Lighting off.
Headlamp dipping stalk
Pull the stalk to switch the lighting between
dipped/main beam headlamps.
In the lighting off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.
Displays
Illumination of the corresponding indicator
lamp in the instrument panel confirms that the
lighting selected is on.
Lighting and visibility

41
Front and rear foglamps
Foglamps selection ring.
They operate with the sidelamps and dipped or
main beam headlamps.Front and rear foglamps:
F

T
urn the ring for wards once to switch on the
front foglamps.
F

T
urn the ring for wards twice to switch on the
rear foglamp.
F

T
urn the ring backwards once to switch off
the rear foglamp.
F

T
urn the ring backwards twice to switch off
the front foglamps. It is prohibited to switch on the front or
rear foglamps in fine weather or in rain,
night or day. In these situations, the power
of their beams may dazzle other drivers.
Do not forget to switch off the front
foglamps and the rear foglamp when they
are no longer necessary.
When lighting is left on
When the driver's door is opened, with the
ignition off, an audible signal warns the
driver that the vehicle's lighting is left on.
In this case, switching off the lighting
stops the audible signal.
Direction indicators
(flashing)The ring automatically returns to its initial
position.
The rear foglamp switches off automatically
when you switch off the sidelamps and dipped
or main beam headlamps.
F

L
eft: lower the lighting control stalk passing
the point of resistance.
F

R
ight: raise the lighting control stalk passing
the point of resistance.
Daytime running lamps
Specific daytime lighting to make the vehicle
more visible.
The daytime running lamps light up
automatically when the engine starts if no other
lamps are on.
They cannot be deactivated.
Although these lamps are located in the
same lamp unit as the front foglamps, they
operate with a specific bulb.
Their use complies with the Highway
Code.
4
Lighting and visibility