cruise control Peugeot Partner VU Dag 2004 Owner's Manual

3YOUR PARTNER AT A GLANCE
22-12-2003
1 -Cruise control stalk.
2 - Lights and direction indicators stalk.
3 - Driver's air bag.Horn.
4 - Instrument panel.
5 - Audio equipment steeringwheel control.
6 - Windscreen wash-wipestalk.
7 - Central adjustableheating/ventilation vents.
8 - Hazard lights button.
9 - Multifunction display orclock.
10 - Central locking button.
11 - Controls:Ð Electric windows.
Ð Demisting of rear door
windows or tailgate.
Ð Air conditioning. 12 -
Windscreen demistingvents.
13 - Speaker (tweeter).
14 - Side window demistingvents.
15 - Side adjustableheating/ventilation vents.
16 - Passenger air bag disarming control*.
17 - Upper glove box or passenger air bag.
18 - Lower glove box.
19 - Audio RB3 or RD3.
20 - Heating/air conditioningcontrols.
21 - Gear lever.
22 - Storage.
23 - 12 V accessories socket.
24 - Removable ashtray. 25 -
Lighter.
26 - Handbrake.
27 - Heated seats control.
28 - Steering lock and ignition.
29 - Steering wheel adjustment control.
30 - Bonnet release.
31 - Fuse box.
32 - Headlamp height adjustment.
33 - Passenger's electric mirrorcontrol.
* According to destination.

9YOUR PARTNER AT A GLANCE
22-12-2003
9
STEERING WHEEL HEIGHT ADJUSTMENT  When stationary, push the control Aforwards to unlock
the steering wheel.
 Adjust the height of the steer-ing wheel.
 Lock it by pulling control A
towards you fully.
76
CRUISE CONTROL The cruise control makes it possi- ble to maintain a constant vehiclespeed, programmed by the driv-
er, irrespective of the profile ofthe road and without any action
on the accelerator or the brakepedals. In order for the vehicle speed to be memorised, it must be greater thanapproximately 25 mph (40 km/h)and fourth or fifth gear must beengaged.
To activate  Place the knob 1in the ON
position.
A speed can now be memo- rised.  Place the knob 1in the OFF
position to deactivate the system.
Memorising a speed When you reach the required speed, press button 2or 3. The
speed is memorised and will be
maintained automatically.
Deactivatingthe memorised speed If you wish to deactivate the memorised speed:  press button 4or the brake or
clutch pedal.
Recalling the memorised speed After deactivation, press button 4 . Your vehicle reverts to the last
memorised speed. Cancelling the stored speed  Place the knob 1 in the OFF
position or switch off the ignition.
81

YOUR PARTNER IN DETAIL81
22-12-2003
CRUISE CONTROL Cruise control enables the vehicle to maintain a steady speed programmed
by the driver, regardless of the roadcharacteristics and without the driverhaving to touch the accelerator orbrake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h), and fourth gear atleast must be engaged.Operation 
Place switch 1in the ONposition.
A speed can be memorised. Place switch 1in the OFF position
to cancel.
Memorising a speedAs soon as you reach the chosen speed, press button 2or 3. This
memorises the speed, which will be
maintained automatically. Note: It is possible to accelerate and
drive momentarily at a speed greater than the memorised speed. Whenthe accelerator pedal is released, thevehicle will return to the memorisedspeed.
Cancelling the memorised speed If you wish to cancel the memorised speed:  press button 4or the brake or clutch
pedal.
Recalling the memorised speedAfter cancellation, press button 4.
Your vehicle will return to the last memorised speed. Changing a memorised speed
To memorise a speed higher than the previous one: 
press button 3;
 release it when you have reached the required speed.
To memorise a speed lower than theprevious one:  press button 2;
 release it when you have reached the required speed.
Cancelling the cruise control  Place switch 1in the OFFposition
or switch off the ignition.
Do not use cruise control on slippery roads or in heavytraffic.