oil viscosity Peugeot Partner VU Dag 2004 Owner's Manual

27
PEUGEOT SERVICING
22-12-2003
Recommendations for recommended lubricants The oils which appear in the table opposite are suitable for mostpurposes. The diagram opposite states the optimum range of viscosity depen-ding on the temperatures at whichthe oils are to be used. It is also possible to use "superior quality" synthetic oils. In the absence of semi-synthetic or
synthetic oils, oils of ACEA A1/A2
and API SH/SJ/SL quality (for petrol
engines), or ACEA B1/B2 and APICD/CF quality (for diesel engines)may be used by following the"Arduous Conditions" servicingschedule which specifies shorterintervals. Do not hesitate to ask for advice
from a PEUGEOT dealer to maintaindriving pleasure and to minimise themaintenance cost of your vehicle. For countries outside Europe, please
contact a local PEUGEOT dealer.
ONLY ONLY
Manual Gearbox ESSO GEAR OIL BVTOTAL TRANSMISSION BV75W80 PR 9736.41 75W80 PR 9730.A2
Power steering ESSO ATF D TOTAL Fluide AT42 PR 9730.94 PR 9730.A3
Other recommended products
Brake fluid PEUGEOT DOT4 Coolant
PROCOR TM 108/GLYSANTIN G33 or REVKOGEL 2000
ONLY protection to Ð35 ¼C

PRACTICAL INFORMATION
88
22-12-2003
CHECKING THE LEVELS Oil level Check the level regularly and top up
between changes. The maximum consumption is 0.5 l per 1 000 km. Check the level with the vehicle on level ground, engine cold, using the oillevel gauge on the instrument panel orthe dipstick. Dipstick
There are two marks on the dipstick: A=maximum
Never fill past this mark.B= minimum
To maintain the reliability of engines and emissioncontrol systems, the useof additives in engine oilis prohibited. Viscosity selection In all cases, the oil selected must meet the manufacturer's requirements.
Brake fluid level:
Ð The level must always be between the DANGER and MAXI-
MUM marks in the reservoir.
Ð If the level drops substantially, contact a PEUGEOT dealer
immediately.
Fluid change:
Ð Must be carried out according to the manufacturer's servicing schedule.
Ð Use fluids recommended by the manufacturer, which fulfil DOT4standards.
Note: Brake fluid is harmful to health
and very corrosive. Avoid all contactwith the skin. Cooling system Use the fluid recommended by the
manufacturer. When the engine is warm, the tem- perature of the coolant is controlled
by the engine fan. As this fan canoperate with the ignition keyremoved and because the coolingsystem is pressurised, wait for atleast one hour after the engine hasstopped before carrying out anywork. Slacken the cap to the first notch torelease the pressure to prevent anyrisk of scalding. When the pressurehas dropped, remove the cap andtop up the level. Note:
The coolant does not need to
be changed. Used oil Do not dispose of used oil, brake fluid or coolant into drains or into theground. Power steering reservoir  Open the reservoir, with the engine at ambient temperature.The level should always beabove the MIN. mark and closeto the MAX. mark.
Windscreen and headlamp* wash level For best quality cleaning and for
your safety, we advise that youuse products recommended by
PEUGEOT.
* According to destination.
Oil change According to the information given in
"PEUGEOT SERVICING" .
Note: avoid used oil coming into
prolonged contact with the skin.