buttons Peugeot RCZ 2011 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2011, Model line: RCZ, Model: Peugeot RCZ 2011Pages: 276, PDF Size: 51.24 MB
Page 4 of 276
CONTENTS
2
ECO-DRIVING 20-21
Direction indicators 99
Hazard warning lamps 99
Emergency or assistance call 100
Horn 100Tyre under-inflation detection 100
Braking assistance systems 102
Trajectory control systems 103
Active bonnet 105Active spoiler 106
Front seat belts 108
Airbags 111
Child seats 116 Front seats 63
Steering wheel adjustment 67
Mirrors 68
Rear seats 71
Ventilation 72Dual-zone digital air conditioning 74
Rear screen demist - defrost 76
Courtesy lamp 77
Interior mood lighting 78Interior fittings 80
Front armrest 83
Boot fittings 86
Lighting controls 88
Automatic illumination of headlamps 92Headlamp adjustment 93
Directional lighting 94Wiper controls 95
Automatic rain sensitive wipers 97
FAMILIARISATION 4-19
1/INSTRUMENTS AND CONTROLS 22-49
2/ACCESS 50-62
3/EASE OF USE AND COMFORT 63-87
4/VISIBILITY 88-98
5/SAFETY 99-123
Remote control key 50
Alarm 54Electric windows 57
Doors 59Boot 62 Instrument panels 22
Warning and indicator lamps 26
Indicators 33Instrument panel buttons 37
Clock 38
Trip computer 39
Monochrome screen C (Peugeot Connect Sound) 4216/9 high defi nition retractable colour screen
(Peugeot Connect Media) 46
Page 26 of 276
km/h
km
l/100
90
500 LIMIT Pause
10,2
24
INSTRUMENT PANEL NAVIGATOR WITH THE
LARGE CENTRAL DISPLAY SCREEN
Controls
There are four buttons to control the instrument panel large central
display screen:
1.
access the main menu, confi rm the selection,
2.
move up through the menu,
3.
move down through the menu,
4.
return to the previous screen, exit from the menu.
Main menu
)
Press button 1
for access to the main menu and select one of the
following functions:
- "Vehicle parameters",
- "Choice of language",
- "Choice of units".
)
Press button 2
or 3
to move on the screen.
)
Press button 1
again to confi rm the selection.
This group of buttons permits:
- when stationary
, confi guration of the vehicle's equipment and of
the parameters of the central display (languages, units...),
- while driving
, scrolling of the active functions (trip computer,
navigation...).
The main menu and its associated functions can only be
accessed when stationary
, via buttons 1
to 4
.
A message appears on the central screen, above a certain speed
threshold, indicating that the main menu cannot be displayed.
The trip computer displays can only be accessed while driving, via
buttons 2
and 3
(refer to the "Trip computer" section).
Page 44 of 276
42
MONOCHROME SCREEN C (WITH
PEUGEOT CONNECT SOUND)
DISPLAYS ON THE SCREEN
This displays the following information:
- time,
- date,
- ambient temperature (this fl ashes if there is a risk of ice),
- state of the openings (doors, boot...),
- visual parking sensors.
- audio functions,
- telephone information and directories.
Warning messages (e.g.: "Emission control system faulty") or
information messages (e.g.: "Automatic lighting of headlamps
activated") may appear temporarily. These can be cleared by pressing
the "ESC"
button.
CONTROLS
From the control panel of your Peugeot Connect Sound, you can:
)
press the "MENU"
button for access to the main menu
,
)
press the "
" or "
" buttons to scroll through the items on the
screen,
)
press the "MODE"
button to change the permanent application
(audio source, telephone...),
)
press the "
" or "
" buttons to change a setting value,
)
press the "OK"
button to confi rm,
or
)
press the "ESC"
button to abandon the operation in progress.
11:32104.6 FM1RTL23Mem1c°
TMC LOUD RDS TATue 21/10/2010
Page 45 of 276
1/
INSTRUMENTS AND CONTROLS
MAIN MENU
)
Press the "MENU"
button to gain access to the main menu
:
- audio functions,
- vehicle diagnostics,
- personalisation-confi guration,
- telephone (Bluetooth system).
)
Press the "
" or "
" buttons to select the menu required, then
confi rm by pressing the "OK"
button.
"AUDIO FUNCTIONS" MENU
With the Peugeot Connect Sound switched on, once this menu has
been selected you can activate or deactivate the functions linked with
use of the radio (RDS, REG, RadioText) or the CD (introscan, shuffl e,
CD repeat).
For more information on the "Audio functions" application, refer to the
Peugeot Connect Sound part of the "Audio and Telematics" section.
"DIAGNOSIS VEHICLE" MENU
Once this menu has been selected, you can consult information
concerning the status of the vehicle.
Alert log
This summarises the active warning messages, displaying them in
succession on the multifunction screen.
)
On the " Diagnosis vehicle
" menu, select the following application:
)
Press the "MENU"
button to gain access to the main menu.
)
Press the arrows, then the "OK"
button to select the " Diagnosis
vehicle
" menu.
Page 46 of 276
44
"PERSONALISATION-CONFIGURATION"
MENU
Once this menu has been selected, you can gain access to the
following functions:
- defi ne the vehicle parameters,
- display confi guration,
- choice of language.
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the
following equipment:
- selective unlocking (refer to the "Access" section),
- guide-me-home and welcome lighting (refer to the "Visibility" and
"Ergonomics and Comfort" sections),
- interior mood lighting (refer to the "Ergonomics and Comfort" section),
- daytime running lamps (refer to the "Visibility" section),
- rear parking sensors (refer to the "Driving" section).
)
Press the "
" or "
" buttons, then the "OK"
button to select the
"Guide-me-home headlamps" line.
)
Press the "
" or "
" buttons to set the value required (15, 30 or
60 seconds), then press the "OK"
button to confi rm.
)
Press the "
" or "
" buttons, then the "OK"
button to select the
"OK"
box and confi rm or press the "ESC"
button to cancel.
Example: setting of the duration of the guide-me-home lighting
)
Press the "
" or "
" buttons, then the "OK"
button to select the
menu required.
Page 55 of 276
2/
ACCESS
LOST KEYS
Visit a PEUGEOT dealer with the vehicle's V5 registration
document and your personal identifi cation documents.
The PEUGEOT dealer will be able to retrieve the key code and
the transponder code required to order a replacement key.
LOCKING THE VEHICLE
Driving with the doors locked may make access to the passenger
compartment by the emergency services more diffi cult in an emergency.
As a safety precaution (with children on board), remove the key from the
ignition when you leave the vehicle, even for a short time.
REMOTE CONTROL
The high frequency remote control is a sensitive system; do not
operate it while it is in your pocket as there is a possibility that it
may unlock the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of
range and out of sight of your vehicle. You run the risk of stopping it
from working and the remote control would have to be reinitialised.
The remote control does not operate when the key is in the
ignition, even when the ignition is switched off, except for
reinitialisation.
ANTI-THEFT PROTECTION
Do not make any modifi cations to the electronic engine
immobiliser system; this could cause malfunctions.
Do not throw the remote control batteries away, they contain
metals which are harmful to the environment.
Take them to an approved collection point.
WHEN PURCHASING A SECOND-HAND
VEHICLE
Have the key codes memorised by a PEUGEOT dealer, to ensure
that the keys in your possession are the only ones which can start
the vehicle.
Page 68 of 276
1
2
M66
STORING DRIVING POSITIONS
System which takes into account the electrical settings of the driver's
seat and the door mirrors. It enables you to store two positions using
the buttons on the side of the driver's seat.
STORING A POSITION
Using buttons M/1/2
)
Switch on the ignition.
)
Adjust your seat and your door mirrors.
)
Press button M
, then press button 1
or 2
within four seconds.
An audible signal is heard indicating that the settings have been
stored.
RECALLING A STORED POSITION
Storing a new position cancels the previous position.
Using button 1 or 2
)
Press and hold button 1
or 2
until the audible signal is heard
indicating the end of the adjustment.
When the ignition is off, after a few consecutive position recalls,
the function will be deactivated until the engine is started, to
prevent discharging of the battery.
Page 77 of 276
3/
EASE OF USE AND COMFORT
4. Automatic visibility programme
The automatic comfort programme may not be suffi cient to
quickly demist or defrost the windscreen and side windows
(humidity, several passengers, ice, etc.).
)
In this case, select the automatic visibility programme.
The system automatically controls the air conditioning, the air fl ow and
the air intake and provides optimum distribution of the ventilation to the
windscreen and side windows.
)
To switch it off, press the "visibility"
button again or press the
"AUTO"
button, the indicator lamp on the button switches off and
the indicator lamp on the "AUTO"
button comes on.
MANUAL OPERATION
If you wish, you can make a different choice from that offered by the
system by changing a setting. The other functions will still be controlled
automatically.
)
Pressing the "AUTO"
button returns the system to completely
automatic operation.
For maximum cooling or heating of the passenger compartment,
it is possible to exceed the minimum value 14 or the maximum
value 28.
)
Turn control 2
or 3
to the left until "LO"
is displayed or to the
right until "HI"
is displayed.
5. Air conditioning On/Off
)
Press this button to switch off the air conditioning.
Switching the system off could result in discomfort (humidity,
condensation).
)
Press this button again to return to automatic operation of the air
conditioning. The indicator lamp on the "A/C"
button comes on.
6. Air distribution adjustment
)
Press one or more buttons to direct the air fl ow towards:
- the windscreen and side windows (demisting or defrosting),
- the windscreen, the side windows and the vents,
- the windscreen, the side windows, the vents and the footwells,
- the vents and the footwells,
- the vents,
- the footwells,
- the windscreen, the side windows and the footwells.
7. Air flow adjustment
)
Turn this control to the left to decrease the air fl ow or to
the right to increase the air fl ow.
The air fl ow indicator lamps, between the two fans, come on
progressively in relation to the value requested.
Page 136 of 276
SET/+LIM
IT
CRUISE 0 I
I
SE
T/–
134
DISPLAYS IN THE INSTRUMENT PANEL
The programmed information is grouped together in the instrument
panel screen.
5.
Speed limiter on/off indication.
6.
Speed limiter mode selection indication.
7.
Programmed speed value.
PROGRAMMING
)
Turn dial 1
to the "LIMIT"
position: the speed
limiter mode is selected but is not switched on
(OFF/Pause).
You do not have to switch the speed limiter on in order
to set the speed.
)
Set the speed value by pressing button 2
or 3
(e.g.: 55 mph (90 km/h)).
You can then change the programmed speed using
buttons 2
and 3
:
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
)
Switch the speed limiter on by pressing button 4
.
)
Switch the speed limiter off by pressing button 4
:
the display confi rms that it has been switched off
(OFF/Pause).
)
Switch the speed limiter back on by pressing
button 4
again.
Page 139 of 276
6/
110km/h110
CRUISE Pause
offkm/hP
SET/+LIM
IT
CRUISE 0 I
I
SE
T/–
DRIVING
DISPLAYS IN THE INSTRUMENT PANEL
The programmed information is grouped together in the instrument
panel screen.
5.
Cruise control off/resume indication.
6.
Cruise control mode selection indication.
7.
Programmed speed value.
PROGRAMMING
)
Turn dial 1
to the "CRUISE"
position: the cruise
control mode is selected but is not switched on
(OFF/Pause).
)
Set the programmed speed by accelerating to the
required speed, then press button 2
or 3
(e.g.: 70 mph (110 km/h)).
You can then change the programmed speed
using buttons 2
and 3
:
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
)
Switch off the cruise control by pressing
button 4
: the display confi rms that it has been
switched off (OFF/Pause).
)
Switch the cruise control back on by pressing
button 4
again.