fuse diagram Peugeot RCZ 2012.5 Owner's Manual - RHD (UK, Australia)

8/
PRACTICAL INFORMATION

CHANGING A FUSE

Before changing a fuse, it is necessary to:


)
identify and rectify the cause of the failure,

)
switch off all electrical consumers,

)
immobilise the vehicle and switch off the ignition,

)
identify the failed fuse using the tables and diagrams in the
following pages.
When working on a fuse, it is important to:


)
use the special tweezer to extract the fuse from its housing.

)
always replace the failed fuse with a fuse of the same rating
(same colour); the use of a fuse of a different rating may cause a
malfunction (risk of fi re).

Good

Failed


Tweezer
If the fault recurs soon after changing a fuse, have the electrical
system of your vehicle checked by a PEUGEOT dealer or a
qualifi ed workshop.


Installing electrical accessories

Your vehicle's electrical system is designed to operate with
standard or optional equipment.
Before installing other electrical equipment or accessories on your
vehicle, contact a PEUGEOT dealer or a qualifi ed workshop.
PEUGEOT will not accept responsibility for the cost incurred in
repairing your vehicle or for rectifying malfunctions resulting from
the installation of accessories not supplied and not recommended
by PEUGEOT and not installed in accordance with its instructions,
in particular when the combined consumption of all of the
additional equipment connected exceeds 10 milliamperes.