spare tire location PONTIAC BONNEVILLE 1993 Owners Manual

Problems on the Road
I
Changing a Flat lire (CONT.:)
10. Near each wheel well is a notch in
the frame into which
to put the jack
head. The front notch
is 10 inches
back from the front wheel well. The
rear notch
is 8 inches forward from
the rear wheel well. The wheel
wrench has these
8 and 10 inch
distances stamped on the handle.
Use the wheel wrench to measure to
the notch by flipping the socket into
the handle, then measuring from the
socket end of the wrench.
1 1. Position the jack and raise the jack
head until
it fits firmly on the ridge
in the vehicle's frame nearest the
flat tire.
Do not raise the vehicle
yet. Put the compact spare tire near
you.
1
I
I
1
2. Raise the vehicle by rotating the
wheel wrench clockwise in the jack.
Raise the vehicle far enough off the
ground
so there is enough room for
the spare tire to fit.
Raising your vehicle with the jack
improperly positioned will damage
the vehicle or may allow the
vehicle to fall
off the jack. Be sure
to fit the jack lift head into the
proper location before raising your vehicle.
3. Remove all the wheel nuts and take off the flat tire.
ProCarManuals.com