wiper blades PONTIAC BONNEVILLE 1997 Owners Manual
[x] Cancel search | Manufacturer: PONTIAC, Model Year: 1997, Model line: BONNEVILLE, Model: PONTIAC BONNEVILLE 1997Pages: 405, PDF Size: 18.83 MB
Page 92 of 405

Windshield Wipers
The windshield wipers are controlled by turning the
band marked WIPER.
For a single wiping cycle, turn the band to MIST. Hold
it there until the wipers start, then let
go. The wipers will
stop after one cycle. If you want more cycles, hold the
band on MIST longer. For
steady wiping at low speed, turn the band away
from you to the
LO position. For high-speed wiping turn
the band further, to
HI. To stop the wipers, move the
band to
OFF.
The wiper speed may be set for a long or short delay
between wipes. This can be very useful
in light rain or
snow. Turn the band to choose the delay time. The
closer to
LO, the shorter the delay.
Heavy snow or ice can overload your wiper motor.
A
circuit breaker will stop the motor until it cools. Clear
away snow or ice to prevent an overload.
Keep in mind that damaged wiper blades may prevent
you from seeing well enough to drive safely. To avoid
damage, be sure to clear ice and snow from the wiper
blades before using them.
If your blades do become
damaged, get new blades or blade inserts.
2-39
ProCarManuals.com
Page 196 of 405

The exit speed is usually posted.
Reduce your speed according to your speedometer, not
to your sense of motion. After driving for any distance
at higher speeds, you may tend to think you are going
slower than you actually are.
Before Leaving on a Long Trip
Make sure you’re ready. Try to be well rested. If you
must start when you’re not fresh
-- such as after a day’s
work
-- don’t plan to make too many miles that first part
of the journey. Wear comfortable clothing and shoes you
can easily drive in.
Is your vehicle ready for a long trip?
If you keep it
serviced and maintained, it’s ready to go.
If it needs
service, have
it done before starting out. Of course,
you’ll find experienced and able service experts
in
Pontiac dealerships all across North America. They’ll be
ready and willing
to help if you need it.
Here are some things you can check before a trip:
Windshield Washer Fluid: Is the reservoir full? Are
all windows clean inside and outside?
0 Wiper Blades: Are they in good shape?
Fuel, Engine Oil, Other Fluids: Have you checked
all levels?
Lamps: Are they all working? Are the lenses clean?
Tires: They are vitally important to a safe,
trouble-free trip.
Is the tread good enough for
long-distance driving? Are the tires all inflated to the
recommended pressure?
0 Weather Forecasts: What’s the weather outlook
along your route? Should you delay your trip a short
time to avoid a major storm system?
Maps: Do you have up-to-date maps?
4-23
ProCarManuals.com
Page 295 of 405

Windshield Wiper Blade Replacement
Replacement blades come in different types and are
removed in different ways. Here’s how to remove the
type with a release clip:
1 Pull the windshield wiper ann away from the windshield.
2. Push down on the release clip with a screwdriver and
pull the
blade assembly off the wiper m.
3. Push the new wiper blade securely on the wiper am.
For the correct windshield wiper blade replacement
length
and type, see “Normal Maintenance Replacement
Parts” in the Index,
Tires
Your new Pontiac comes with high-quality tires
made
by a l’eading tire manufacturer. If you ever have
questions about your tire warranty and where to obtain
service,
see your Pontiac Warranty booklet for details.
Poorly maintained and improperly used tires
are dangerous.
Overloading your tires ‘can cause
overheating as a result of too much friction.
You could have an air-out and a serious
accident. See “Loading Your Vehicle” in
the Index.
CAUTION: (Continued)
6-42
ProCarManuals.com
Page 307 of 405

Cleaning the Outside of the
Windshield and Wiper Blades
If the windshield is not clear after using the windshield
washer,
or if the wiper blade chatters when running, wax,
sap or other material may be on the blade or windshield.
Clean the outside of the windshield with
GM
Windshield Cleaner, Bon Ami@ Powder (non-scratching
glass cleaning powder),
GM Part No. 105001 1. The
windshield is clean if beads
do not form when you rinse
it with water.
Grime from the windshield will stick to the wiper blades
and affect their performance. Clean the blade by wiping
vigorously with a cloth soaked in full-strength windshield
washer solvent. Then
rinse the blade with water.
Check the wiper blades and clean them as necessary;
replace blades that look worn.
Weatherstrips
Silicone grease on weatherstrips will make them last
longer, seal better, and not stick or squeak. Apply
silicone grease with a clean cl’oth at least every six
months. During very cold, damp we’ather more frequent
application may be required.
(See “Recommended
Fluids and Lubricants” in the Index.)
Cleaning the Outside of Yc ac
The paint finish on your vehicle provides beauty, depth
of color, gloss retention and durability.
Washing Your Vehicle
The best way to preserve your vehicle’s finish is to keep it
clean by washing it often with lukewarm or cold water.
Don’t wash your vehicle in the direct rays of the sun.
Don’t use strong soaps or chemical detergents. Use
liquid hand, dish or
car wa,shing (mild detergent) soaps.
Don’t use cleaning agents that
are petroleum based, or
that contain acid or abrasives. All cleaning agents
should be
flushed promptly and not allowed to dry on
the surface, or they could stain. Dry the finish with a
soft, clean chamois or
an all-cotton towel to avoid
surface scratches
and water spotting.
High pressure car washes may cause water to enter
your vehicle.
Cleaning Exterior Lamps/Lenses
Use lukewarm or cold water, a soft cloth and a liquid
hand,
dish or vehicle washing (mild detergent) soap to
clean exterior lamps and lenses.
Follow instructions
under “Washing Your Vehicle.”
6-54
ProCarManuals.com
Page 320 of 405

Engine Specifications
3800 Series I1 Engine (L36)
VIN Engine Code K
Type V6
Displacement
3.8 Liters
Horsepower 205-hp
Firing Order 1-6-5-4-3-2
Thermostat Temperature 195°F (91OC)
3800 Series I1 Supercharged Engine (L67)
VIN Engine Code 1
Type V6
Displacement 3.8
Liters
Horsepower 240-
hp
Firing Order 1-6-5-4-3-2
Thermostat Temperature 195°F (91OC)
Normal Maintenance
Replacement Parts
Air Cleaner Filter ............ AC Type A-1096C
Engine Oil Filter
.............. AC Type PF-47
Transaxle Filter
.......... GM Part No. 865 1909
Spark Plugs .................. AC Type 41-921
Gap:
0.060 inch (1.52 mm)
Windshield Wiper Blades
Type
..................................
Length .................... 22 inches (56 cm)
Pin
Vehicle Dimensions
Wheelbase ........... 110.8 inches (28 1.4 cm)
Tread Width Front
................. 60.4 inches (153.4 cm)
Rear
.................. 60.3 inches (153.2 cm)
Length
............... 201.9 inches (512.8 cm)
Height
.............. 55.7 inches (141.5 cm)
Width ........ + ........ 74.6 inches (1 89.5 cm)
6-67
ProCarManuals.com