driver seat adjustment PONTIAC BONNEVILLE 2003 Owners Manual

0 The vehicle should not have any snow, ice or mud
attached to it.
* The vehicle should be fully assembled and all other
work stopped while headlamp aiming is being done.
0 The vehicle should be normally loaded with a
full tank of fuel and one person or
160 Ibs. (75 kg)
on the driver’s seat.
Tires should be properly inflated.
Headlamp aiming is done with the vehicle low beam
lamps. The high beam lamps will be correctly aimed
if
the low beam lamps are aimed properly. The
headlamp aiming devices are under the hood near
the headlamps.
If you believe your headlamps need horizontal (lefthight)
adjustment, follow the horizontal aiming procedure.
If you believe your headlamps need only vertical
procedure.
\Up/UUvvl I) ~UJU~CI I IGI 11, IUIIUVV UI IIY LI IC VGI Llbat all I 111 IY I 1-1 --l:..-L---L x-II ^.., --I., +I..^ .,-&:--I -:-:--
Adjustment screws can be turned with an E8 Torx@
socket or
Ti 5 Torx@ screwdriver.
5-53