PONTIAC G6 2007 User Guide

Heated Seats
Your vehicle may have heated front seats.
The buttons are located
on the outboard side of
the driver’s and front
passenger’s seats.Press the top of the switch to turn the feature on.
The seat will heat to the high setting. The
indicator light above the switch will be lit next to
the number 2.
Press the top of the switch again to go to the low
heat setting. The indicator light will be lit next
to the number 1.
Press the bottom of the switch to turn the
feature off.
The heated seat feature will turn off when the
ignition is turned off.
11

Reclining Seatbacks
{CAUTION:
You can lose control of the vehicle if you
try to adjust a manual driver’s seat while
the vehicle is moving. The sudden
movement could startle and confuse you,
or make you push a pedal when you do
not want to. Adjust the driver’s seat only
when the vehicle is not moving.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.Your seats have manual reclining seatbacks. The
lever used to operate them is located on the
outboard side of the seats.
4-door Model Shown, 2-door Model Similar
12

To recline the seatback, do the following:
1. Lift the recline lever.
2. Move the seatback to the desired position,
then release the lever to lock the seatback
in place.
3. Push and pull on the seatback to make sure it
is locked.
To return the seatback to an upright position, do
the following:
1. Lift the lever fully without applying pressure to
the seatback and the seatback will return to
the upright position. Release the lever to
lock the seatback in place.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
2. Push and pull on the seatback to make sure it
is locked.
13

{CAUTION:
Sitting in a reclined position when your
vehicle is in motion can be dangerous.
Even if you buckle up, your safety belts
cannot do their job when you are reclined
like this.
The shoulder belt cannot do its job
because it will not be against your body.
Instead, it will be in front of you. In a
crash, you could go into it, receiving neck
or other injuries.
The lap belt cannot do its job either. In a
crash, the belt could go up over your
abdomen. The belt forces would be there,
not at your pelvic bones. This could cause
serious internal injuries.
For proper protection when the vehicle is
in motion, have the seatback upright.
Then sit well back in the seat and wear
your safety belt properly.
Do not have a seatback reclined if your vehicle is
moving.
14

Head Restraints
Adjust the head restraint so that the top of the
restraint is at the same height as the top of
the occupant’s head. This position reduces the
chance of a neck injury in a crash.Pull the restraint up to
raise it. To lower the
head restraint, press the
button, located on the
top of the seatback, and
push the restraint down.
The rear seat head restraints are also adjustable.
15

Seatback Latches
{CAUTION:
You can lose control of the vehicle if you
try to adjust a manual driver’s seat while
the vehicle is moving. The sudden
movement could startle and confuse you,
or make you push a pedal when you do
not want to. Adjust the driver’s seat only
when the vehicle is not moving.
If your vehicle is a coupe or retractable hardtop
model, it has a seatback latch as part of the
manual recline lever. This feature provides easy
access to the rear seats. To operate the seatback
latch, pull up on the manual recline lever. The
seatback will automatically spring forward.
To operate the latch from the rear seat, pull back
on the top of the manual recline lever.
16

{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
Lift the seatback up to return it to the upright
position. Push and pull on the seatback to make
sure it is locked.
Easy Entry Seat
{CAUTION:
If the easy entry right front seat is not
locked, it can move. In a sudden stop or
crash, the person sitting there could be
injured. After you have used it, be sure to
push rearward on an easy entry seat to be
sure it is locked.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
If your vehicle is a two-door model, the front seats
can be moved to make it easier to get in and
out of the rear seat.
17

To use the easy entry seat, do the following:
1. Remove the safety belt from the
headrest-mounted guide.2. Pull back on the top of the recliner lever. The
seatback will move forward.
18

3. Slide the seat forward.4. Move the seatback to its original position after
the passenger enters the rear seat area; then
return the front seat safety belt to the
safety belt guide.
5. Move the seat rearward until it locks into
place. Make sure both the seat and
seatback are locked.
19

Power Lift Seat
Your vehicle may have this feature. First move the
seat forward or rearward to where you want it.
SeeManual Seats on page 9.
The power lift seat switch is located on the
outboard side of the driver’s seat. To raise or
lower the seat, press the top or bottom of
the switch.
Rear Seats
60/40 Split Bench Seat
(Sedan and Coupe)
Folding the Seatback
To fold down the rear seatback, do the following:
1. The handles that are used to lower the rear
seatbacks are located on the upper edge of
the trunk opening. Open the trunk. Pull
the driver’s side handle to open the larger
side of the seatback. Pull the passenger’s side
handle to open the smaller side of the
seatback.
20