To replace one of these bulbs, do the following:
1. Open the trunk. SeeTrunk on page 113
for more information.
2. Remove the convenience net, if the vehicle
has one.
3. Remove the two wing nuts from the trunk trim
to expose the hex nuts.
4. Remove the three hex nuts retaining the
taillamp assembly.5. Pull the assembly off to the side to release it
from the rear of the vehicle.
6. Turn the bulb socket counterclockwise to
remove.
7. Pull the bulb from the bulb socket.
8. Install a new bulb.
9. Reverse Steps 3 through 5 to reinstall the
taillamp assembly.
366
Taillamps, Turn Signal, Sidemarker,
Stoplamps and Back-up Lamps
(Retractable Hardtop)
A. Sidemarker Lamp
B. Stoplamp/Taillamp/Turn Signal Lamp
C. Back-up LampTo replace one of these bulbs, do the following:
1. Open the trunk. SeeTrunk on page 113
for more information.
2. Locate the three rubber covers in the trunk trim,
near the taillamp assembly and remove them.
3. Remove the two nuts and one bolt retaining
the taillamp assembly.
4. Pull off the assembly to the side to release it
from the vehicle.
5. Turn the bulb socket counterclockwise to
remove.
6. Pull the bulb from the bulb socket.
7. Install a new bulb.
8. Reverse Steps 1 through 5 to reinstall the
taillamp assembly.
367