lumbar support PONTIAC G6 2010 Owners Manual

Power Lumbar
Press the front (A) or rear (B) of the control to increase
or decrease lumbar support.
SeePower Lumbar on page 2-5.
Heated Seats (If Equipped)
On vehicle’s with heated front seats, press the top of
the switch to turn the feature on to the high heat setting.
The indicator light (2) will be lit.
Press the top of the switch again to go to the low heat
setting. The indicator light (1) will be lit.
Press the bottom of the switch to turn the feature off.
The heated seat feature will turn off when the ignition is
turned off.
SeeHeated Seats on page 2-6.
1-8

Power Seats
If the vehicle has power seats, the controls used to
operate them are located on the outboard side of
the seats.
To adjust the seat:
•Move the seat forward or rearward by sliding the
control forward or rearward.
•Raise or lower the front part of the seat cushion by
moving the front of the control up or down.
•Raise or lower the rear part of the seat cushion by
moving the rear of the control up or down.
Power Lumbar
On seats with power lumbar, the control is located on
the outboard side of the seat cushion.
Press the front of the control (A) to increase lumbar
support. Press the rear of the control (B) to decrease
lumbar support.
2-5