reset PONTIAC GRAND PRIX 2007 Service Manual

SERVICE TRACTION SYSTEM
This symbol comes on
with this message.
If the vehicle has the Traction Control
System (TCS), this message displays when the
system is not functioning properly. A warning light
also appears on the instrument panel cluster.
SeeTraction Control System (TCS) Warning Light
on page 178orEnhanced Traction System
Warning Light on page 179. SeeTraction Control
System (TCS) on page 292for more information.
Have the TCS serviced by your dealer as soon as
possible.This message displays only while the ignition is in
RUN. A chime sounds for two seconds while
this message is displayed. Press the set/reset
button to acknowledge this message and to clear
it from the screen.
This message continues to display if it has not
been acknowledged when the engine is turned off.
It also re-displays for three seconds if the
message has been acknowledged, but the
condition still exists when the engine is turned off.
If the condition still exists, the message
re-appears when the engine is turned on.
221

SERVICE VARIABLE EFFORT
STEERING
This symbol comes on
with this message.
If the vehicle has the variable effort steering
system, this message displays if this system is not
functioning properly. SeeSteering on page 296
for more information. Have the system serviced by
your dealer as soon as possible.
This message displays only while the ignition is in
RUN. A chime sounds for two seconds while
this message is displayed. Press the set/reset
button to acknowledge this message and to clear
it from the screen.
This message continues to display if it has not
been acknowledged when the engine is turned off.
It also re-displays for three seconds if the
message has been acknowledged, but the
condition still exists when the engine is turned off.
If the condition still exists, the message
re-appears when the engine is turned on.
SERVICE VEHICLE SOON
This symbol comes on
with this message.
This message displays when a non-emissions
related malfunction occurs. Have the vehicle
serviced by your dealer as soon as possible.
This message displays only while the ignition is in
RUN. A chime sounds for two seconds while
this message is displayed. Press the set/reset
button to acknowledge this message and to clear
it from the screen.
This message continues to display if it has not
been acknowledged when the engine is turned off.
It also re-displays for three seconds if the
message has been acknowledged, but the
condition still exists when the engine is turned off.
If the condition still exists, the message
re-appears when the engine is turned on.
222

Entering the Personal Programming Mode
1. Turn the ignition on and make sure the
vehicle is in PARK (P).
To avoid excessive drain on the battery, it is
recommended that the headlamps are
turned off.
2. Press the options button until PERSONAL
PROGRAMMING MODE appears on the DIC.
3. Press the set/reset button to display the rst
screen.
4. Press the options button to access these
modes:
Personal Programming Mode Screens
EXTERIOR LIGHTING DELAY:This screen
allows this feature to be turned off, or allows the
selection of the number of seconds the headlamps,
sidelamps, taillamps, fog lamps, and back-up
lamps are turned on after the key is removed from
the ignition, or the vehicle is unlocked using the
remote keyless entry transmitter.
If OFF is selected, the exterior lamps will not
turn on.If a time delay is chosen, the lamps will turn on for
the selected time. The time delay will be
cancelled and the exterior lamps will turn on
automatically when the key is removed from the
ignition, or the vehicle is unlocked using the
remote keyless entry transmitter.
To program this mode, use the following
procedure:
1. Press and release the set/reset button to
scroll to the selection you want to program.
Choose from OFF, 15, 30, 60, or 90 seconds.
2. Press the options button again to advance to
the next screen.
INTERIOR LIGHTS WHEN DOOR CLOSED:This
screen allows this feature to be turned OFF or ON.
If OFF is selected, the interior lamps will turn off
immediately when the ignition is turned off and the
last open door is closed.
If ON is selected, the interior lamps will stay on for
about 25 seconds after the vehicle’s ignition is
turned off and the last open door is closed.
227

To program this mode, use the following procedure:
1. Press and release the set/reset button to
scroll to either OFF or ON.
2. Press the options button again to advance to
the next screen.
INTERIOR LIGHTS WHEN KEY REMOVED:This
screen allows this feature to be turned OFF or
ON. This feature enables the interior lamps in the
vehicle to turn on for about 25 seconds after
the key is removed from the ignition.
If OFF is selected, removing the key from the
ignition will not cause the interior lamps to turn on.
If ON is selected, removing the key from the
ignition will cause the interior lamps to be turned
on for about 25 seconds.
To program this mode, use the following
procedure:
1. Press and release the set/reset button to
scroll to either OFF or ON.
2. Press the options button again to advance to
the next screen.AUTO DOOR UNLOCK:This screen allows this
feature to be turned off, used for the driver’s
door only, or for all the doors.
If OFF is selected, none of the doors will unlock
when the vehicle’s transaxle is shifted into
PARK (P).
If DRIVER is selected, only the driver’s door will
unlock when the vehicle’s transaxle is shifted
into PARK (P).
If ALL is selected, all the doors will unlock when
the vehicle’s transaxle is shifted into PARK (P).
To program this mode, use the following
procedure:
1. Press and release the set/reset button to
scroll to either OFF, DRIVER, or ALL.
2. Press the options button again to advance to
the next screen.
228

AUTO DOOR UNLOCK ON:If DRIVER or ALL
was selected on the AUTO DOOR UNLOCK
screen, this screen allows selection of when the
vehicle’s doors will unlock. The choices are
when the key is removed from the ignition or when
the vehicle is shifted into PARK (P).
If KEY-OUT is selected, the auto door unlock will
function when the key is taken out of the
ignition.
If PARK is selected, the auto door unlock will
function when the transaxle is shifted into
PARK (P).
To program this mode, use the following
procedure:
1. Press and release the set/reset button to
scroll to either KEY-OUT or PARK.
2. Press the options button again to advance to
the next screen.DELAYED LOCKING:This screen allows this
feature to be turned OFF or ON. The key must be
out of the ignition for this feature to work.
If OFF is selected, there will be no delayed locking
of the vehicle’s doors.
If ON is selected, the locking of the vehicle’s
doors will be delayed by ve seconds after
a power door lock switch is pressed while the door
is open, or the LOCK button on the remote
keyless entry transmitter is pressed while any door
is open.
To program this mode, use the following
procedure:
1. Press and release the set/reset button to
scroll to either OFF or ON.
2. Press the options button again to advance to
the next screen.
229

REMOTE LOCKS FEEDBACK:This screen
allows selection for this option to be turned OFF,
or gives the choice of two methods of verication;
LIGHTS or LIGHTS and HORN; that indicate
the vehicle’s doors are locked when the LOCK
button on the remote keyless entry transmitter is
pressed.
If OFF is selected, this feature will not be
programmed.
If LIGHTS is selected, the exterior lamps will ash
when the LOCK button on the remote keyless
entry transmitter is pressed.
If LIGHTS and HORN is selected, the exterior
lamps will ash when the LOCK button on
the remote keyless entry transmitter is pressed,
and the horn will sound when the LOCK button on
the remote keyless entry transmitter is pressed
again within ve seconds of the previous
command.To program this mode, use the following
procedure:
1. Press the set/reset button to scroll to OFF,
LIGHTS, or LIGHTS and HORN.
2. Press the options button again to advance to
the next screen.
If the vehicle does not have a content
theft-deterrent system, the next screens with
PROGRAMMING FINISHED and DISPLAY OFF
will appear.
If the vehicle does have a content theft-deterrent
system, the next screen will appear.
THEFT DETERRENT:The vehicle may have a
content theft-deterrent system. Once it is
turned on, the system will activate if someone tries
to enter the vehicle without using the remote
keyless entry transmitter or the correct key. This
screen allows this feature to be turned OFF or ON.
If OFF is selected, the content theft-deterrent
system will not function.
If ON is selected, the content theft-deterrent
system will be activated.
230

To program this mode, use the following
procedure:
1. Press the set/reset button to scroll to
OFF or ON.
2. Press the options button again to advance to
the next screen.
KEY CYLINDER DISARM:If the vehicle has a
content theft-deterrent system, and ON was
selected on the THEFT DETERRENT screen, this
screen allows this feature to be turned OFF or
ON. This feature determines whether the driver’s
door key cylinder may be used to disarm the
content theft-deterrent system.
If OFF is selected, the vehicle’s content
theft-deterrent system can not be disarmed by
unlocking the driver’s door using the driver’s door
key cylinder. Selecting OFF prevents a thief from
disarming the vehicle’s content theft-deterrent
system by attacking the driver’s door key cylinder,
and may make the vehicle more secure. However, if
OFF is selected, unlocking an armed vehicle by
using the driver’s door key cylinder and opening the
door will cause the content theft alarm to activate.
For this reason, it is recommended that the vehicle
be unlocked using the remote keyless entry system
when this feature is set to OFF.If ON is selected, the vehicle’s content
theft-deterrent system can be disarmed by
unlocking the driver’s door using the driver’s door
key cylinder.
To program this mode, use the following procedure:
1. Press the set/reset button to scroll to
OFF or ON.
2. Press the options button again to advance to
the next screen.
LOCK SWITCH ARM:If the vehicle has the
content theft-deterrent system and ON was
selected on the THEFT DETERRENT screen, this
screen allows this feature to be turned OFF or
ON. This feature controls whether the vehicle’s
content theft system can be activated using a door
lock switch.
If OFF is selected, locking the vehicle using a
door lock switch will not cause the vehicle’s
content theft system to arm.
231

If ON is selected, the content theft-deterrent
system can be armed using the driver’s door lock
switch by pressing the driver’s door lock switch
while the driver’s door is open and the key is not in
the ignition, or by pressing the front passenger’s
door lock switch while the front passenger’s door is
open and the key is not in the ignition.
To program this mode, use the following
procedure:
1. Press the set/reset button to scroll to
OFF or ON.
2. Press the options button again to advance to
the next screen.
REMOTE START:If your vehicle has the remote
start feature, this screen allows this feature to
be turned OFF or ON. The remote start feature
allows you to start the engine from outside of the
vehicle using your remote keyless entry
transmitter. See “Remote Vehicle Start” under
Remote Keyless Entry (RKE) System Operation on
page 87for more information.If OFF is selected, the remote start feature will be
disabled.
If ON is selected, the remote start feature will be
enabled.
To program this mode, use the following
procedure:
1. Press the set/reset button to scroll to
OFF or ON.
2. Press the options button again to advance to
the next screen.
PROGRAMMING FINISHED will appear on the
next screen. This conrms that the personal
options programming is complete.
232

Audio System(s)
Determine which radio your vehicle has and then
read the pages following to familiarize yourself
with its features.
Driving without distraction is a necessity for a
safer driving experience. SeeDefensive Driving on
page 284. By taking a few moments to read this
manual and get familiar with your vehicle’s
audio system, you can use it with less effort, as
well as take advantage of its features. While your
vehicle is parked, set up your audio system by
presetting your favorite radio stations, setting the
tone, and adjusting the speakers. Then, when
driving conditions permit, you can tune to
your favorite stations using the presets and
steering wheel controls if the vehicle has them.{CAUTION:
This system provides you with a far greater
access to audio stations and song listings.
Giving extended attention to entertainment
tasks while driving can cause a crash and
you or others can be injured or killed.
Always keep your eyes on the road and
your mind on the drive — avoid engaging
in extended searching while driving.
Keeping your mind on the drive is important for
safe driving. Here are some ways in which you can
help avoid distraction while driving.
233

While your vehicle is parked:
Familiarize yourself with all of its controls.
Familiarize yourself with its operation.
Set up your audio system by presetting your
favorite radio stations, setting the tone, and
adjusting the speakers. Then, when driving
conditions permit, you can tune to your favorite
radio stations using the presets and steering
wheel controls if the vehicle has them.
Notice:Before adding any sound equipment
to your vehicle, such as an audio system,
CD player, CB radio, mobile telephone,
or two-way radio, make sure that it can be
added by checking with your dealer. Also,
check federal rules covering mobile radio and
telephone units. If sound equipment can be
added, it is very important to do it properly.
Added sound equipment may interfere with the
operation of your vehicle’s engine, radio, or
other systems, and even damage them.
Your vehicle’s systems may interfere with the
operation of sound equipment that has
been added.Notice:The chime signals related to safety
belts, parking brake, and other functions
of your vehicle operate through the
radio/entertainment system. If that equipment
is replaced or additional equipment is added
to your vehicle, the chimes may not work. Make
sure that replacement or additional equipment
is compatible with your vehicle before
installing it. SeeAccessories and Modifications
on page 336.
Your vehicle has a feature called Retained
Accessory Power (RAP). With RAP, the audio
system can be played even after the ignition
is turned off. SeeRetained Accessory
Power (RAP) on page 106for more information.
Setting the Time
The radio may have a button marked with an H or
HR to represent hours and an M or MIN to
represent minutes.
234