brake PORSCHE 911 GT2 2008 5.G Information Manual

· 15 · · 14 ·The 911 GT2 |
The 911 GT2
Drive is transmitted through a pre-
cision six-speed manual gearbox.
Rear-wheel drive provides driving
dynamics that are similar to those
of a racing car. In the 911 GT2,
Porsche also uses a special system
for conventional manual transmis-
sion: the Launch Assistant (see
page 38) – for maximum accelera-
tion from a standing start.
For a sporty but still comfortable
drive, particularly for this type of
sportscar, the standard suspension
features variable damping providedby Porsche Active Suspension
Management (PASM, see page 48).
This active damping system offers
a wide range of benefits including
greater performance and comfort.
Also standard is Porsche Stability
Management (PSM, see page 50).
For the first time, the integrated
control systems for lateral and lon-
gitudinal dynamics, stability control
(SC) and traction control (TC) can
be fully disabled in two stages for a
more natural drive. This means thecar can also be enjoyed to maxi-
mum effect on the racetrack.
The one-piece 19-inch GT2 alloy
wheels of the 911 GT2 are fitted
with road-legal sports tyres as
standard. In size 325/30 ZR 19 on
the rear, these are 20 mm larger
than on the 911 Turbo. The special
tread and compound enable
tremendous lateral acceleration
and higher cornering speeds as
well as precision handling and
turn-in characteristics on either
road or racetrack. A range ofsetup options is available for
racing use, including ride height,
camber, toe angle and front/rear
anti-roll bars.
Developed in motorsport, and
standard on the 911 GT2 is the
Porsche Ceramic Composite
Brake (PCCB, see page 58).
The discs are made from specially
treated carbon fibre and are
approximately 50 % lighter than
comparable metal alternatives.
The results: better brake perfor-mance, greater agility and lower
fuel consumption.
Sports bucket seats (see page 72)
with folding backrest, integral
thorax airbag and manual fore/aft
adjustment, are fitted as standard.
A perfect driving position is essen-
tial in a car with the performance
potential of the 911 GT2. The latest
Porsche Communication Manage-
ment (PCM, see page 76) is also
fitted as standard. This features
a new 6.5-inch touchscreen for
intuitive control.We believe that you don’t have
to exploit the full potential of
the 911 GT2. But you may well
choose to.

· 16 ·· 17 ·
The 911 GT2 |The 911 GT2
being forced into the turbos,
there is less resistance from
the compressors and therefore
less back-pressure in the
exhaust, which means greater
engine performance.
The engine cover, featuring
the GT2 logo, is made from
lightweight glass-fibre reinforced
plastic (GRP). Twin titanium
tailpipes are elegantly incorpor-
ated within the rear apron design.
Warm air is vented from the braking power, with large air
intakes for improved air flow to
the central radiator and front
brakes. The integral air outlet
ahead of the front lid makes a
major contribution to front-enddownforce. The airstream from the
central radiator is channelled up
over the car, forcing the front end
downwards, thereby enhancing
balance and steering response.
The importance of air in the per-
formance of the 911 GT2 is also
apparent from the large intake
openings in the rear side panels
which supply the intercooler units.The most impressive view is also
the one that others will see most
of all: the rear. The fixed rear wing
with integral lip spoiler ensures
optimum stability at speed.
As the car accelerates and you’re
pressed into your seat, air is
forced through the intake openings
on the rear wing uprights and into
the engine turbocharging system.
This ‘ram air’ effect has a key role
to play in the exceptional efficiency
of the engine. Since air is already Power. Torque. Acceleration. All in
plentiful supply. Nothing else can
match that energy – except the
car’s design. A single glance is all
it takes to realise that fact.
The front end is aerodynamically
adapted for the high thermal
load of the engine and increased
Aesthetically. Aerodynamically. Resistance is futile.
Designing the 911 GT2.engine compartment via cooling
slits at the rear.
The combined effect of all these
aerodynamic modifications is a
drag coefficient of just 0.32 as
well as positive front and rear
downforce. Behind the wheel,
that means better grip, better
directional stability and excep-
tional handling characteristics.
Technically and visually, the
result is the same: a breathtaking
driving machine.

· 41 · · 40 ·
2
1
3
4
5
6
12
13
16
2022
21
19
7
9
1011
15
14
18
17
8
9
The 911 GT2 |Drive
1. Bi-Xenon headlights
2. Radiator module (left)
3. Radiator module (centre)
4. Radiator module (right)
5. Coolant pipe9. Intercoolers
10. Pressure pipe
11. Throttle valve
(electronically actuated)
12. Expansion intake manifold 6. Coolant expansion tank
7. Air filter
8. Exhaust-gas turbocharger
with Variable Turbine
Geometry (VTG)17. Generator
18. PASM damper
19. PCCB brake
20. Tandem brake booster
21. 6-speed manual gearbox
22. Sport bucket seat
13. Main silencer (titanium)
14. Tailpipe (titanium)
15. Oil filter
16. Engine oil reservoir
(dry-sump lubrication)

· 44 ·· 45 ·The 911 GT2 |
Chassis
Rear axle Front axle
The 911 GT2 chassis is designed
for racecar-like performance on
every type of tarmac from motor-
way to track. The car rides about
25 mm lower than the 911 Carrera
and its lightweight build has
reduced overall weight as well as
the unsprung masses. Agile and
responsive, it is stable and secure– particularly during cornering
manoeuvres.
The front suspension with its
special wheel mounts has
McPherson spring struts with
the wheels mounted individually
on trailing arms and wishbones.
Each front wheel is preciselylocated, ensuring excellent
handling and directional stability
in all road and track scenarios.
Brake spoiler elements provide
efficient cooling for each of the
front brake units.The rear axle assembly consists
of subframe-mounted multi-link
suspension featuring LSA con-
struction (Light, Stable, Agile).
This lightened design featuring
an aluminium cross-member
is an important factor in the
exceptional dynamics of the car.
Ride height, camber, toe angle
and anti-roll bar settings can
all be adapted to individual circuit
characteristics, as befits a racing
Porsche.There is virtually no unwanted
movement between the suspen-
sion and body, thanks to special
features such as metal bearings
with ball joints on the front strut
mounts and rigid cross-members
at the rear. This reduced elasticity
and improved wheel location
enable better handling and turn-in.
The 911 GT2 has an electronic
variable damping system as
standard – Porsche Active Suspension Management (PASM,
see page 48).
This variable
damper system offers two basic
setup modes, ‘Normal’ and
‘Sport’.
Racetrack. Motorway. Wherever the road goes.
Chassis.

· 47 · · 46 ·
The 911 GT2 |Chassis
The 911 GT2 runs on one-piece
19-inch GT2 wheels with anti-
theft protection and wheel
centre caps featuring the GT2
logo. The wheels are extremely
light for their size due to their
special lightweight construction.The resulting reduction in unsprung
masses improves driving dynamics
and performance. Thanks to the
generous internal diameter of the
wheel, large brakes can be fitted
on the front axle. The wheels run
flush with the exterior of the carand come with special sport tyres
as standard.
The wheel dimensions are
8.5J x 19 ET 53 with 235/35 ZR 19
tyres (front) and 12J x 19 ET 51
with 325/30 ZR 19 tyres (rear).The 19-inch sports tyres provide
a large road contact patch.
They offer greater traction
under acceleration and braking,
greater precision in both handling
and manoeuvrability, as well as
higher cornering speeds on dry
road surfaces. In short: even
greater driving pleasure. Note:
increased risk of aquaplaning due
to lower tread profile.Tyre Pressure Monitoring (TPM),
included as standard equipment,
provides early warning of tyre
pressure loss. The driver is
informed via the on-board com-
puter display as well as a separate
indicator light. A tyre repair system
consisting of tyre sealant and
compressor with separate tyre
pressure gauge is also standard.19-inch GT2 wheel
Less weight. More road contact.
Wheels.

· 51 · · 50 ·The 911 GT2 |
Chassis
Some things never change,
including driver expectations of
a 911 GT2 : sports-oriented
performance, a direct response
and impressive power.
So Porsche Stability Management
(PSM) has been specially adaptedfor the 911 GT2. In addition to
ABS, the package includes two
automatic driver aids: stability
control (SC) and traction control
(TC).
Stability control (SC), which is
responsible for lateral dynamics,uses a range of sensors to moni-
tor the direction, speed, yaw
velocity (speed of rotation around
the vertical axis) and lateral
acceleration of the car. Using
this information, it is possible to
calculate the actual direction of
travel at any given moment. If thecar begins to oversteer or under-
steer, selective braking is applied
on individual wheels to restore con-
trol in critical driving scenarios.
Traction control (TC), with its
integrated ABD (automatic brake
differential), ASR (anti-slip regula-
tion) and EDC (engine drag-torque
control) functions, is responsible
for the longitudinal dynamics of the
car. Configured for sports-oriented
driving, traction control improveshandling under acceleration on
surfaces with inconsistent grip.
It also prevents the rear from
‘stepping out’ if a wheel loses
traction under full power. The
trigger threshold is relatively high,
which means it is rarely employed
in normal dry conditions.
A unique feature of PSM on
the 911 GT2 is that the control
interventions are delayed and
can be disabled completely in
two stages – for deliberate per-
formance handling.
Stage 1 disables the stability con-
trol (SC) via the ‘SC OFF’ switch in
the centre console. In ‘SC OFF’
mode, the control system does
not intervene if the car goes off-
course in the lateral direction,
which means the throttle can
be used to help steer the car.
Traction control (TC) is still active
in this mode.
Stage 2 disables the traction con-
trol as well via the separate
‘SC+TC OFF’ switch, giving the
driver full command of the vehi-
cle. Another unique feature is the fact that stability control
remains disabled in stages 1 and
2 even when the ABS is required
under braking. Specially develop-
ed for the 911 GT2, this revised
system strategy means the car
can also be enjoyed to maximum
effect on the racetrack.
The anti-lock braking system
(ABS 8.0) is integrated in PSM
and remains active, irrespective
of which settings have been
selected. ABS ensures a relatively
short braking distance and thus
enhanced safety.
It’s good to know who’s in control.
Porsche Stability Management (PSM).

· 57 · · 56 ·
The 911 GT2 |Safety
The 911 GT2 excels in every
respect, be it power, driving
dynamics or safety. Every aspect
of its lighting concept, braking
system, rigid body and ergonomic
interior is fine-tuned to its
performance and to the individual
driver. For example, the sportbucket seats (see page 72) with
folding backrest offer racecar-like
lateral support.
Lighting system.
The standard lighting system
on the 911 GT2 uses the latest
Bi-Xenon gas-discharge technology
to achieve a light quality similar
to daylight. The compact main
headlights provide a broad and
uniform swathe of light that
increases active safety in all
road scenarios and in long,
blind corners in particular.
The brightness of the gas-discharge
system featured in the Bi-Xenon
headlights is approximately double
that of conventional halogen units.
A headlight cleaning system is also
included as standard.
The horizontal indicators in
the outer front air intakes use
high-performance light-emitting
diodes (LEDs) to increase
brightness and visibility.
The high-level third brake light
at the base of the rear screen
is equipped with rapid-response
LEDs.Two additional lights on the inside
of each door offer added conveni-
ence and safety. The kerb light
(white) provides useful illumination
when stepping out of the car.
The safety light (red) warns traffic
approaching from the rear when
the door is open.
Bi-Xenon headlightsHigh-level third brake light
A must: absolute confidence in the safety of your car.
Active safety.

· 59 · · 58 ·
The 911 GT2 |Safety
The 911 GT2 is equipped as
standard with the Porsche
Ceramic Composite Brake (PCCB)
that has already demonstrated
its performance credentials on
the racetrack, for example, in the
vehicles of the Porsche Mobil 1
Supercup.only much harder than metal, it
is also more resistant to heat.
Even at high temperatures, the
thermal resistance of the PCCB
disc ensures exemplary dimen-
sional stability. The ceramic
material is totally resistant to
The large disc diameter (380 mm
front and 350 mm rear) adds sig-
nificantly to brake performance.
The ceramic discs are made from
a specially treated carbon-fibre
compound that is silicated in a
high-vacuum process at 1,700 ºC.
The material thus produced is notcorrosion and offers excellent
acoustic damping properties.
The pads are mounted in six-piston
monobloc aluminium fixed calipers
at the front, with four-piston units
at the rear. The resulting brake
forces are not only extremely
high, they are also exceptionally
consistent. The pedal response
is fast and precise with only
moderate input required.
PCCB enables shorter braking
distances in even the toughest
road and race conditions. Excel-
lent fade resistance ensures
greater balance when slowing
from racetrack speeds.
The key advantage of PCCB is
the total weight saving of approxi-
mately 50 % over comparable
metal discs. The mounting bells
on both front discs are made
from weight-saving aluminium. As
well as enhancing performance
and fuel economy, there is a major
reduction in both the unsprung
and rotating masses. This, of
course, improves comfort and
road-holding on uneven road
surfaces as well as general
handling and agility.
Please note that circuit racing,
trackday use and other forms of
performance driving can signifi-
cantly reduce the service life of
even the most durable pads and
discs. As with conventional high-
performance braking systems,
we recommend that all brake
components be professionally
inspected and replaced where
necessary after every track event.
Porsche Ceramic Composite Brake (PCCB)
When it comes to brake technology, we demand nothing but the best.
Porsche Ceramic Composite Brake (PCCB).

· 71 · · 70 ·
The 911 GT2 |Comfort
Steering wheel.
The three-spoke GT2 steering
wheel can be manually adjusted
for height and reach. The steering
wheel is upholstered in Alcantara
and the airbag module has a
leather finish.
The multifunction steering wheel
and the three-spoke sports
steering wheel are also optionally
available in smooth-finish leather.
Interior materials.
The high-quality materials in the
interior of the 911 GT2 reflect its
sporting credentials: genuine
leather and Alcantara. Offering
exceptional grip and easy-care
properties, Alcantara can be found
wherever optimum hand contact isrequired: on the steering wheel
rim, gear lever, handbrake lever
grip and door handles, as well as
on the door panels, storage com-
partment lids and centre console.
The standard folding sport bucket
seats and the optional adaptive
sports seats are trimmed in blackleather, while the seat
centres are
covered with Alcantara.
A GT2 logo
is integrated in the rear bulkhead
lining.
The front centre console has
been totally redesigned and is
now predominantly trimmed in
classic black.
Three-spoke sports steering wheel
in smooth-finish leather

· 107 · · 106 ·
The 911 GT2 |Technical data
Technical data
Engine
Cylinders6
Displacement3,600 cm3
Max. power (DIN)390 kW (530 hp)
at rpm6,500
Max. torque680 Nm
at rpm2,200 – 4,500
Compression ratio9.0 : 1
Transmission
LayoutRear-wheel drive
Manual gearbox6-speed
Chassis
Front axleMcPherson-strut suspension
Rear axleLSA multi-link suspension
SteeringVariable steering ratio,
power-assisted (hydraulic)
Turning circle10.9 m
BrakesPorsche Ceramic Composite Brake (PCCB):
6-piston monobloc aluminium fixed calipers
at front, 4-piston monobloc aluminium fixed
calipers at rear, discs internally vented and
cross-drilled
Vehicle stability systemPSM
Anti-lock braking systemABS 8.0
WheelsFront: 8.5J x 19 ET 53
Rear: 12J x 19 ET 51
Ty r e sFront: 235/35 ZR 19 (sport tyres)
Rear: 325/30 ZR 19 (sport tyres)
Weights
Unladen weight (DIN)1,440 kg
Unladen weight (EC)*1,515 kg
Permissible gross weight1,750 kg
Performance
Top speed329 km / h (204 mph)
0 –100 km / h (0 – 62 mph)3.7 secs
0 –160 km / h (0 – 99 mph)7.4 secs
0 – 200 km / h (0 –124 mph)11.2 secs
Flexibility 80 –120 km / h (50 –75 mph) 4.1 secs
in 5th gear
Fuel consumption/emissions**
In accordance with 80 / 1268 /EC as valid at the time of going to print
Urban in l / 100 km (mpg)18.8 (15.0)
Extra urban in l / 100 km (mpg)8.9 (31.7)
Combined in l / 100 km (mpg)12.5 (22.6)
CO2emissions in g /km298
Dimensions /aerodynamics
Length4,469 mm
Width1,852 mm
Height1,285 mm
Wheelbase2,350 mm
Luggage compartment volume105 litres
Tank capacity (refill volume)90 litres
Drag coefficient0.32
** Weight is calculated in accordance with the relevant EC Directives and is valid for standard specification vehicles only.
Optional equipment means greater weight. The figure given includes 68 kg for the driver and 7 kg for luggage.
** The figures given refer to vehicles with standard specification in Germany. Data determined in the NEDC (New European Driving Cycle) in accor-
dance with the EU5 (80/1268/ EEC) measurement method in the version valid at time of going to print. The figures do not relate to an individual
vehicle, nor do they constitute part of the offer. They are intended solely as a means of comparing different types of vehicle. Further information
on the individual vehicles can be obtained from your Porsche Centre.