torque PORSCHE 911 GT2 2008 5.G Information Manual
[x] Cancel search | Manufacturer: PORSCHE, Model Year: 2008, Model line: 911 GT2, Model: PORSCHE 911 GT2 2008 5.GPages: 55, PDF Size: 2.76 MB
Page 5 of 55
· 13 · · 12 ·
The 911 GT2 |The 911 GT2
Always composed. Even in extremes.
Engineering the 911 GT2.
How do we know our limits?
Because we choose to
explore them.
The 911 GT2.The Porsche 911 GT2. The excep-
tion to the rule. Every new edition
has clearly exceeded everything
that has gone before. Designing a
911 GT2 requires a new approach
to old ideas. It means questioning
convention, crossing the limits,
thinking beyond the norm. It
means not being confined to
torque of 680 Nm is available
from 2,200 to 4,500 rpm. At
5,500 rpm, it is still higher than
650 Nm. The benchmark sprint
to 100 km / h (62 mph) is com-
pleted in 3.7 seconds. Maximum
speed is 329 km / h (204 mph).
For some, that number means
little on paper – but it all becomes
clear on the road. With a driving
experience – and an engine sound
– that can only be conceived in
the Porsche 911 GT2. Performanceand efficiency have both been
improved, mainly through changes
to the turbocharging system. The
flow-optimised turbines and com-
pressor units have been specially
adapted to the engine output and
offer a more effective turbochar-
ging process.
In addition, an expansion intake
system has been specially devel-
oped for the 911 GT2 (see page
32) which overturns all previous
principles of air supply to turbo road or track, straight or bend,
comfort or sports performance.
It means having the freedom to
leave what you know and examine
new possibilities. The result: our
most powerful road-going 911.
The source of that power is a
3.6-litre flat-six boxer enginebased on the current 911 Turbo.
Special features include VarioCam
Plus and twin turbochargers with
Variable Turbine Geometry (VTG,
see page 28) enabling faster
response at lower engine speeds.
Together, they generate even
greater power: a mighty 390 kW
(530 hp) at 6,500 rpm. Maximumengines. Equally effective is the
new rear silencer, now made from
ultra-lightweight titanium.
In the end, even we were impressed
with the power of the 911 GT2, as
we had not expected that so much
potential existed in the engine of
the 911 Turbo from which it is
derived. This was achieved because,
in terms of development, we
were prepared to go down new,
previously unexplored avenues.
Page 7 of 55
· 16 ·· 17 ·
The 911 GT2 |The 911 GT2
being forced into the turbos,
there is less resistance from
the compressors and therefore
less back-pressure in the
exhaust, which means greater
engine performance.
The engine cover, featuring
the GT2 logo, is made from
lightweight glass-fibre reinforced
plastic (GRP). Twin titanium
tailpipes are elegantly incorpor-
ated within the rear apron design.
Warm air is vented from the braking power, with large air
intakes for improved air flow to
the central radiator and front
brakes. The integral air outlet
ahead of the front lid makes a
major contribution to front-enddownforce. The airstream from the
central radiator is channelled up
over the car, forcing the front end
downwards, thereby enhancing
balance and steering response.
The importance of air in the per-
formance of the 911 GT2 is also
apparent from the large intake
openings in the rear side panels
which supply the intercooler units.The most impressive view is also
the one that others will see most
of all: the rear. The fixed rear wing
with integral lip spoiler ensures
optimum stability at speed.
As the car accelerates and you’re
pressed into your seat, air is
forced through the intake openings
on the rear wing uprights and into
the engine turbocharging system.
This ‘ram air’ effect has a key role
to play in the exceptional efficiency
of the engine. Since air is already Power. Torque. Acceleration. All in
plentiful supply. Nothing else can
match that energy – except the
car’s design. A single glance is all
it takes to realise that fact.
The front end is aerodynamically
adapted for the high thermal
load of the engine and increased
Aesthetically. Aerodynamically. Resistance is futile.
Designing the 911 GT2.engine compartment via cooling
slits at the rear.
The combined effect of all these
aerodynamic modifications is a
drag coefficient of just 0.32 as
well as positive front and rear
downforce. Behind the wheel,
that means better grip, better
directional stability and excep-
tional handling characteristics.
Technically and visually, the
result is the same: a breathtaking
driving machine.
Page 9 of 55
· 20 ·· 21 ·The 911 GT2 |
Drive
At Porsche, our aim is not to
increase power – except through
increased efficiency. Which is
why we began with the 911 Turbo
when developing an engine for
the 911 GT2. Its power is com-
bined with rear-wheel drive for
racing-car driving dynamics. But
how is it possible to improve onan engine that is already so close
to perfection? How did we introduce
even greater potential – and the
character of a racing engine? The
answer: by increasing efficiency.
This was mainly achieved by four
crucial components, one of these
being the six-cylinder twin-turboboxer unit with flow-optimised
turbines featuring Variable Turbine
Geometry (VTG, see page 28)
and larger compressors on the
intake side. Together with
VarioCam Plus (see page 26), they
boost performance while reducing
emissions over the entire engine
speed range. Also with the innovative expansion intake system
which works on highly efficient
principles that are contrary to all
previous methods (see page 32).
In addition, the new lightweight
rear silencer made from titanium
enhances performance by producing
less back-pressure through the
exhaust system.
Oil is evenly distributed under all
load conditions (e.g., high-speed
cornering) thanks to a dry-sump
lubrication system with external
tank. After passing through the
engine, the oil is cooled by means
of a dedicated oil-water heat
exchanger. Both of these systems
are proven in competition use.
The water-cooled flat-six twin-turbo
engine with four-valve technology
in the rear of the 911 GT2
generates a mighty 390 kW
(530 hp) from a 3.6-litre
displacement at 6,500 rpm.
Maximum torque of 680 Nm is
achieved at low rpm and sustained
across much of the engine
speed range. It is available
between 2,200 and 4,500 rpm
and the resulting acceleration is
quite literally breathtaking.
300 500 550
600
650
700 750 800
850
280 300 320 340 360
380
400
2000 3000 4000 5000 6000 7000
350 400
450
1000
Power (kW)
Engine Speed (rpm)
180 200 220 240 260 420
900
Torque (Nm)
390 kW (530 hp)
680 Nm
The benchmark sprint to 100 km/ h
(62 mph) is completed in
3.7 seconds; 200 km / h (124 mph)
requires just 11.2 seconds.
Maximum speed – if you really
want to put it to the test – is
329 km / h (204 mph). Even more
impressive is the power-to-weight
ratio of 361 hp per tonne and
the specific power output of
147 hp per litre. Fuel economy
is also exceptional for a car
with such high performance.
There is nothing ordinary about
the 911 GT2 and it exceeds even
the highest expectations. In
other words: everything you’d
expect from the most powerful
road-going 911.
911 GT2 : 680 Nm from 2,200 to 4,500 rpm, 390 kW (530 hp) at 6,500 rpm 3.6-litre twin-turbo boxer engine
The greatest strength comes from within.
Engine.
Page 11 of 55
· 25 · · 24 ·
The 911 GT2 |Drive
Lightweight design.
The six-cylinder twin-turbo boxer
engine is a compact unit offering
excellent cylinder charging and
torque-curve characteristics
as well as first-rate balance with
minimal vibration. The flat-six
design allows a low centre of
gravity with resulting advantages
for traction and driving dynamics.
The alloy crankcase consists of
two main sections, each contain-
ing one bank of cylinders. Thecrankshaft runs in eight main
bearings and is driven by forged
connecting rods. For optimum
strength and durability, we’ve used
forged aluminium pistons running
in Nikasil-coated aluminium liners
and cooled via individual oil-spray
jets. The results: lower frictional
resistance and a lengthy service
life – even when subjected to
heavy use.
The cylinder heads are made
from an extremely heat-resistantlightweight alloy. Each cylinder
bank has two overhead camshafts
driving a set of four valves (two
inlet and two exhaust) on each
individual cylinder. The valves are
arranged in a ‘V’ formation and
have a highly efficient dual-spring
closing action enabling higher
engine speeds. Performance is
enhanced with the aid of both
Variable Turbine Geometry (VTG,
see page 28) and VarioCam Plus
(variable valve timing and lift on
the inlet side). The benefits are
not only greater power and
torque, but also better fuel
econ-
omy and lower emissions.
Dry-sump lubrication.
This racing technology uses a
separate oil reservoir to ensure
consistent oil pressures through-
out the engine, even during pro-
longed periods of lateral and longi-
tudinal loads. After passing
through the engine, every drop of oil is returned directly to the
external reservoir. The flow is dri-
ven by two scavenge pumps in
each cylinder head and a further
two pumps in the crankcase. Gas
is removed from the returning
oil via a defoaming device in the
reservoir. The oil is returned
to the lubrication points in the
engine by means of a dedicated
oil-feed pump. With a further
scavenge pump in each of the
twin turbocharger units, the
911 GT2 has a total of nineseparate pumps driving the lubri-
cation system. The oil level can be
checked from inside the car via
the standard on-board computer.
The 911 GT2 is factory-filled with
Mobil 1 high-performance fully
synthetic oil. The exceptional
properties of this premium-quality
lubricant ensure reliable starting
even in the coldest conditions. It
also reduces wear and contributes
to the long-term durability of the
engine.
Page 12 of 55
· 26 ·· 27 ·
The 911 GT2 |Drive
VarioCam Plus
Engine cooling.
The engine of the 911 GT2 features
cross-flow water cooling with fully
integrated coolant management.
This technology ensures a consis-
tent flow of coolant to each of
the engine’s cylinders. Waste
heat from the oil is transferred to
the coolant via two oil/water heat
exchangers. The coolant is routed
through twin radiator modules
ahead of the front wheels and a
centrally placed unit in the nose.
VarioCam Plus.
VarioCam Plus is a variable valve
timing system on the inlet side
which also features two-stage valve
lift. The benefits it provides include
greater power and torque at all
engine speeds, as well as excellent
running characteristics, better fuel
economy and fewer emissions.
Essentially, VarioCam Plus makes
two engines out of one. The first is
geared for normal road driving, thesecond for high-performance use.
The system switches seamlessly
between the two as the driver
inputs change. All operations
are controlled by the engine
management system. The results:
emphatic acceleration and
smoother running.
The two-stage lift mechanism
on each inlet valve consists of an
electro-hydraulically switchable
tappet. Each of the 12 tappets con-
sists of two concentric parts – anouter ring and a central shaft –
which can be locked together by
means of a pin. The system can
then vary the valve lift by using
two large profile cams on the outer
ring or a smaller cam lobe on the
central shaft. The timing of each
valve is steplessly controlled by
means of an electro-hydraulic
rotary vane adjuster at the head
of the corresponding camshaft.
To improve responsiveness during
warm-up in cold weather, VarioCam
Plus will select the higher valve
lift setting and retard valve timing.
At medium revs and low engine
loads, the lower valve lift setting
is activated and timing advanced in
order to reduce fuel consumption
and emissions. The economy of
the engine is particularly enhanced
at lower engine speeds. For maxi-
mum power and torque, the higher
lift setting is selected and the tim-
ing of the valves is advanced.This results in copious torque
and exceptional fuel economy,
particularly in comparison with
much larger engines offering
similar power output.
Page 14 of 55
· 31 · · 30 ·
1
2
3
4
5
6
7
8
9
10
The 911 GT2 |Drive
1. Turbine casing
2. Movable guide vanes
3. Turbine wheel
4. Electric motor for guide
vane adjustment
5. Guide vane adjuster
6. Compressor casing
7. Compressor wheel
8. Recirculation valve
9. Oil inlet
10. Coolant inlet
Guide vanes open Guide vanes closed
Guide vanes open Guide vanes closedTurbocharger guide vane adjuster
To overcome this problem, the
twin water-cooled turbochargers
on the 911 GT2 feature Variable
Turbine Geometry (VTG). With
this technology, the gas-flow
from the engine is channelled
onto the turbines via electronically
adjustable guide vanes. By chang-
ing the vane angle, the system
can replicate the geometry in all
types of turbo, large or small,
and thus achieve the optimum
gas-flow characteristics. The guide
vanes are controlled by the engine
management system. The result
is a high turbine speed – and
therefore higher boost pressure –
even at low engine rpm. With
more air available, the combustion
is increased, yielding greater
power and torque.
Special features on the 911 GT2
include flow-optimised turbines
and larger compressors which
generate a higher boost pressure.
Maximum torque is
achieved at
low rpm and sustained across
much of the engine speed
range.With 680 Nm available between
2,200 and 4,500 rpm, the
resulting acceleration is nothing
less than phenomenal.
When the boost pressure reaches
its maximum value, the guide
vanes are opened further. By
varying the vane angle, it is
possible to generate the required
boost pressure at all engine
speeds. As a result, there is no
need for excess pres
sure valveson the intake side as found
on
conventional turbocharged
engines.
This delivers impressive
engine efficiency and lower
fuel consumption.
Page 15 of 55
· 33 · · 32 ·The 911 GT2 |
Drive
Unfortunately, compression not
only increases air volume, it also
increases air temperature and this
has a negative effect on ignition.
Our new expansion manifold simply
turns that principle around. The
internal geometry is radically
different from that on a resonance
intake system. Key modifications
include a longer distributor pipe,
with a smaller diameter, and
shorter intake pipes.Expansion intake manifold.
More power than a 911 Turbo -–
from the same engine? Not easy.
But feasible, which is why it
required yet another spectacular
innovation from Porsche.
The 911 GT2 has an innovative
expansion intake system with a
unique working principle which
overturns the methods previously
used. Our ‘expansion’ intake
mani-
fold is a radical new
developmentthat is the polar opposite of
the resonance principle used
on conventional turbocharged
engines.
A resonance manifold increases
engine output by forcing add-
itional air into the combustion
chambers. To do this, the mani-
fold is designed in such a way
that the air – which vibrates
due to the action of the valves –
is in a compression phase as it
passes through the inlet ports.As a result, the air is in the
expansion phase as it enters the
combustion chambers. Since
expansion always cools, the
air/fuel temperature is lower and
ignition is significantly improved –
thereby increasing performance.
Of course, the amount of air
that enters the engine under
expansion is less than it would
be under compression. To
compensate for this, we’ve simply
increased the boost pressurefrom the turbochargers by
approximately 0.2 bar. The result-
ing increase in temperature –
again through compression – is
immediately offset by the uprated
intercoolers.
Instead of hot compressed
air entering the combustion
chambers, we now have cooler
air generating more power and
torque. As a consequence,
there is a major improvement in
engine efficiency and thereforelower fuel consumption even under
heavy loads and at high rpm.
A simple solution, but then that’s
often the way when you take
a new approach to old ideas.
Expansion intake manifold
Page 18 of 55
· 39 · · 38 ·
The 911 GT2 |Drive
The six-speed manual gearbox in
the 911 GT2 is specifically
designed for the high engine
performance. The individual ratios
are carefully matched to the spe-
cific characteristics of the engine.The gear-lever throw is short and
precise, enabling fast and
accurate gearshifts.
A typical feature of the 911 GT2
is the Launch Assistant – for maximum acceleration from a
standing start. The clutch and
accelerator are depressed when
the vehicle is stationary.
When a
boost pressure of approximately
0.9 bar is displayed in the instru-ment
cluster, release the clutchas
quickly as possible and maximum
a
cceleration automatically ensues.
Normally on a turbocharged vehicle
with manual gearbox, the boost
pressure under acceleration from
a standing start is relatively low.
The turbo effect is delayed as
the engine gathers speed and
the boost pressure starts to build.On the 911 GT2, this initial delay
is reduced. While the car is still
stationary, the fuel injection is
modified to help the engine reach
maximum output earlier. The boost
pressure is significantly increased
and the engine readied for a faster
start.
A specially designed traction
control system adapts the acceler-
ation procedure automatically
in the ECU to ensure optimum
traction. The clutch remains
engaged. This reduces load and
prevents high clutch wear. The
power is transmitted directly to
the road via the rear axle.
The gearbox is combined with
a cable linkage and dual-mass fly-
wheel offering added comfort and
precision. The close ratio spread
enables powerful acceleration
within the optimum engine power
band.
Steel baulk rings on gears two to
five ensure a precise gearshift
action even under extreme loads.Cooling is provided by an add-
itional oil-to-water heat exchanger
and spray lubrication. Both of
these features are essential for
durability in endurance racing
conditions.
Other standard features include
a limited-slip differential with
asymmetrical lock factor. Offering
better traction and handling
when exiting a corner, it applies a
higher proportion of drive torque
to the loaded outer rear wheel.
The term ‘asymmetrical’ means
that one lock factor is applied
when cornering under power
(28 %), and another when braking
for a corner (40 %).
Maximum response to minimum effort.
Transmission.
Page 24 of 55
· 51 · · 50 ·The 911 GT2 |
Chassis
Some things never change,
including driver expectations of
a 911 GT2 : sports-oriented
performance, a direct response
and impressive power.
So Porsche Stability Management
(PSM) has been specially adaptedfor the 911 GT2. In addition to
ABS, the package includes two
automatic driver aids: stability
control (SC) and traction control
(TC).
Stability control (SC), which is
responsible for lateral dynamics,uses a range of sensors to moni-
tor the direction, speed, yaw
velocity (speed of rotation around
the vertical axis) and lateral
acceleration of the car. Using
this information, it is possible to
calculate the actual direction of
travel at any given moment. If thecar begins to oversteer or under-
steer, selective braking is applied
on individual wheels to restore con-
trol in critical driving scenarios.
Traction control (TC), with its
integrated ABD (automatic brake
differential), ASR (anti-slip regula-
tion) and EDC (engine drag-torque
control) functions, is responsible
for the longitudinal dynamics of the
car. Configured for sports-oriented
driving, traction control improveshandling under acceleration on
surfaces with inconsistent grip.
It also prevents the rear from
‘stepping out’ if a wheel loses
traction under full power. The
trigger threshold is relatively high,
which means it is rarely employed
in normal dry conditions.
A unique feature of PSM on
the 911 GT2 is that the control
interventions are delayed and
can be disabled completely in
two stages – for deliberate per-
formance handling.
Stage 1 disables the stability con-
trol (SC) via the ‘SC OFF’ switch in
the centre console. In ‘SC OFF’
mode, the control system does
not intervene if the car goes off-
course in the lateral direction,
which means the throttle can
be used to help steer the car.
Traction control (TC) is still active
in this mode.
Stage 2 disables the traction con-
trol as well via the separate
‘SC+TC OFF’ switch, giving the
driver full command of the vehi-
cle. Another unique feature is the fact that stability control
remains disabled in stages 1 and
2 even when the ABS is required
under braking. Specially develop-
ed for the 911 GT2, this revised
system strategy means the car
can also be enjoyed to maximum
effect on the racetrack.
The anti-lock braking system
(ABS 8.0) is integrated in PSM
and remains active, irrespective
of which settings have been
selected. ABS ensures a relatively
short braking distance and thus
enhanced safety.
It’s good to know who’s in control.
Porsche Stability Management (PSM).
Page 52 of 55
· 107 · · 106 ·
The 911 GT2 |Technical data
Technical data
Engine
Cylinders6
Displacement3,600 cm3
Max. power (DIN)390 kW (530 hp)
at rpm6,500
Max. torque680 Nm
at rpm2,200 – 4,500
Compression ratio9.0 : 1
Transmission
LayoutRear-wheel drive
Manual gearbox6-speed
Chassis
Front axleMcPherson-strut suspension
Rear axleLSA multi-link suspension
SteeringVariable steering ratio,
power-assisted (hydraulic)
Turning circle10.9 m
BrakesPorsche Ceramic Composite Brake (PCCB):
6-piston monobloc aluminium fixed calipers
at front, 4-piston monobloc aluminium fixed
calipers at rear, discs internally vented and
cross-drilled
Vehicle stability systemPSM
Anti-lock braking systemABS 8.0
WheelsFront: 8.5J x 19 ET 53
Rear: 12J x 19 ET 51
Ty r e sFront: 235/35 ZR 19 (sport tyres)
Rear: 325/30 ZR 19 (sport tyres)
Weights
Unladen weight (DIN)1,440 kg
Unladen weight (EC)*1,515 kg
Permissible gross weight1,750 kg
Performance
Top speed329 km / h (204 mph)
0 –100 km / h (0 – 62 mph)3.7 secs
0 –160 km / h (0 – 99 mph)7.4 secs
0 – 200 km / h (0 –124 mph)11.2 secs
Flexibility 80 –120 km / h (50 –75 mph) 4.1 secs
in 5th gear
Fuel consumption/emissions**
In accordance with 80 / 1268 /EC as valid at the time of going to print
Urban in l / 100 km (mpg)18.8 (15.0)
Extra urban in l / 100 km (mpg)8.9 (31.7)
Combined in l / 100 km (mpg)12.5 (22.6)
CO2emissions in g /km298
Dimensions /aerodynamics
Length4,469 mm
Width1,852 mm
Height1,285 mm
Wheelbase2,350 mm
Luggage compartment volume105 litres
Tank capacity (refill volume)90 litres
Drag coefficient0.32
** Weight is calculated in accordance with the relevant EC Directives and is valid for standard specification vehicles only.
Optional equipment means greater weight. The figure given includes 68 kg for the driver and 7 kg for luggage.
** The figures given refer to vehicles with standard specification in Germany. Data determined in the NEDC (New European Driving Cycle) in accor-
dance with the EU5 (80/1268/ EEC) measurement method in the version valid at time of going to print. The figures do not relate to an individual
vehicle, nor do they constitute part of the offer. They are intended solely as a means of comparing different types of vehicle. Further information
on the individual vehicles can be obtained from your Porsche Centre.