brake sensor PORSCHE 911 GT2 2010 5.G Information Manual

| 18
Porsche Active Suspension
Management (PASM).
The electronic adjustment of the
shock absorber systems actively
and continuously controls the
damping force – depending on
the driving style and situation –
for each individual wheel.
By pressing a button, the driver
can choose between two setup
modes, ‘Normal’ and ‘Sport ’.
Normal mode is designed for

general road driving and on the
racetrack in the wet. Sport mode
is specially designed for maximum
lateral acceleration and the best
possible traction on the racetrack.
Porsche Stability Management
(PSM).
The limits of driving dynamics.
Those who venture here should
have the necessary equipment –
in addition to driving ability. So,
PSM has been adapted to the
power of the new 911 GT2 RS.
The principle is that in addition
to the ABS there are
two auto-
matic control systems: stability
control (SC) and traction control
(TC). Stability control (SC) controls
lateral dynamics using a range
of sensors to constantly monitor
the direction, speed, yaw velocity
and lateral acceleration of the
car. This information is used to
calculate the actual direction
of travel. If the car starts to go
off course, stability control (SC)
initiates selective braking on
individual wheels to stabilise the
vehicle in critical driving scenarios.
Traction control (TC) with its
integrated ABD (automatic brake
differential), ASR (ant-slip regula-
tion) and EDC (engine drag-torque
control) functions controls the
l ongitudinal dynamics of the car.
This highly sports-oriented traction
control improves traction on vary-
ing road surfaces. Traction control
(TC) also limits excessive force
that can cause the rear to slide out
uncontrollably under full power.
The special feature of PSM in
the 911 GT2 RS is that these
two systems can be switched
of f completely, in t wo stages –
for deliberate sports handling.
In the first stage, the ‘SC OFF’
button in the centre console disa-
bles the stability control (SC). In
‘SC OFF’ mode, the system does
not intervene if the car goes off
course in the lateral direction.
In addition to deliberate steering actions, the car can now also be
driven very dynamically into bends
by acting on the throttle. Traction
control (TC) is still active in this
mode.
In the second stage, the separate
‘SC + TC OFF’ button also disables
the traction control (TC). In this
mode, both the lateral dynamics
control and traction control are
deactivated. Driving is now influ-
enced only by the driver. Another
special feature is that in both the
first stage (SC OFF) and second
stage (SC + TC OFF), the cross-
dynamic control will not reactivate
itself even when the brakes are
applied strongly, including in the
ABS control range. This function
and switching strategy enables
race-oriented driving dynamics –
to meet individual demands for
extraordinary performance on the
racetrack.