fuel pressure PORSCHE 911 TURBO 2004 4.G Information Manual

· 13 ·The new 911 Turbo |
The new 911 TurboThe new 911 Turbo |The new 911 Turbo
In 1905, the Swiss engineer,
Dr. Alfred Büchi, filed the first ever
patent for a turbocharged piston
engine. The fundamental principle,
now a century old, remains
unchanged to this day: to use the
energy latent within the exhaust
flow from the engine to increase
overall performance.
The first turbocharged engine
was built in 1910 by the firm of
Murray-Willat. The concept was
embraced by the aviation industry,
which required an effective means
of compensating for the loss of
power caused by reduced oxygen
levels during high-altitude flight.Porsche was among the first
to recognise other benefits of
the technology, including higher
performance potential from
relatively small displacement
engines. This would lead to
the development of powerful
new engines with very modest
dimensions and weight.
The basic principle of a
turbocharged engine is to use
the exhaust gas flow to drive a
radial turbine which in turn drives
a compressor in the air intake
tract. The rotation of the
compressor generates a higher
intake pressure, thereby delivering
a greater amount of oxygen to
the engine. With more oxygen
available, more fuel can be burnt,
and higher performance can be
achieved. The density of the
air can be further increased by
cooling it prior to combustion.
The first ‘intercooler’ device on
a production Porsche appeared
in 1977 on the 911 Turbo 3.3.
· 12 · · 11 ·
From a stroke of genius.
From strength to strength.
The new 911 Turbo.

To apply these benefits efficiently
to the road, we required another
innovation in sportscar design: all-
wheel drive with Porsche Traction
Management (PTM). Using an
electronically controlled multi-plate
clutch, this intelligent technology
provides variable drive to each
axle. The front/rear split is con-
tin
uously adjusted based on current
road conditions and driver inputs.
Although biased towards the rear,
the front receives more power
whenever the situation requires.
Porsche Traction Management
is specifically designed to
optimise driving dynamics. The
additional traction provided by
both the all-wheel drive system
and PTM represents a major
improvement in active safety,
especially in the wet or on snow.
Another benchmark technology
on the new 911 Turbo is the
standard braking system. The
front and rear discs have a
generous diameter of 350 mm.On the optional Porsche Ceramic
Composite Brake (PCCB), the
front diameter is increased to
380 mm.
Other standard features on the
new 911 Turbo include a new
evolution of Porsche Stability
Management (PSM) as well as
Porsche Active Suspension
Management (PASM) featuring
electronic damper control.
A
limited-slip differential is available
for the rear axle as an option.
For even greater performance, the
car can be equipped with the
optional Sport Chrono Package
Turbo. Key features include
an ‘overboost’ function which
provides as much as 60 Nm
of additional torque under
acceleration. When the throttle
is fully open, the boost pressure
is increased temporarily by
approximately 0.2 bar. The
electronic throttle map is
also adjusted to give a more
dynamic response to pedal
inputs.
Other modifications when ‘Sport’
mode is selected include a major
rise in the trigger threshold used
by Porsche Stability Management
(PSM). The all-wheel drive system
featuring PTM provides a similar
increase in driver involvement
by sending a greater proportion
of drive torque directly to the
rear wheels. PASM provides a
stiffer suspension setup enabling
faster turn-in and better road
contact.
Another major development
on the new 911 Turbo is the
car’s lightweight design and
construction. The doors and front
lid are made from aluminium
which offers a range of benefits
in terms of both performance
and economy. Every gram of
weight on every component
is there for a specific reason.
As a result, the standard model (with six-speed manual gearbox)
weighs just 1,585 kg. Even more
impressive are the power-to-
weight ratio of 302.8 bhp per
tonne and surprisingly low fuel
consumption.This powerful potential is, of
course, matched by exemplary
ride quality on every type of
road. This rare combination of
performance and comfort is one of the distinguishing features
of the 911 Turbo.
· 18 ·· 19 ·The new 911 Turbo |
The new 911 Turbo

· 26 ·The new 911 Turbo |
Drive
· 25 · · 24 · · 23 ·
7. Exhaust-gas turbocharger
with Variable Turbine
Geometry (VTG)
8. Intercoolers
9. Pressure pipe
10. Throttle valve
(electronically actuated)
11. Exhaust system
12. Oil filter
13. Engine oil reservoir
(dry-sump lubrication)
1. Radiator module (left)
2. Radiator module (centre)
3. Radiator module (right)
4. Coolant pipe
5. Coolant expansion tank
6. Air filter
14. Generator
15. PASM damper
16. Tandem brake booster
17. 6-speed manual gearbox
18. Front differential
19. Fuel tank1. Oil scavenge pump
2. Oil-pressure pump (obscured)
3. Engine oil reservoir
(dry-sump lubrication)
4. Camshaft adjuster (VarioCam Plus)
5. Intake camshaft
6. Tappets (with hydraulic valve
clearance adjustment)
7. Valve springs
8. Intake valves
9. Nikasil-coated cylinder bore
10. Forged aluminium piston
11. Forged connecting rod
12. Crankshaft
13. Camshaft drive chain
14. Camshaft drive chain tensioner
with guide rail
15. Single-spark ignition coil
16. Spark plug
17. Exhaust-gas turbocharger with
Variable Turbine Geometry (VTG)
18. Exhaust system
19. Catalytic converter
20. Pressure pipe
21. Throttle valve (electronically actuated)
22. Plenum chamber
23. Ancillary drive belt
24. Fluid reservoir for
power-steering system
1
2
3
4
5
21
2019
19
9
6
23
24
16
11
12
14
13
22
15
17
7810
18
16
1
2
6
5
3
109
8
7
15
17
18
19
14
13
12
4
11
8

Lightweight design.
The six-cylinder boxer engine is
a highly compact unit offering
excellent cylinder charging and
torque characteristics as well
as optimum balance and minimal
vibration. With the cylinders
arranged horizontally on either
side of the crankshaft, the
layout is key to the car’s low
centre of gravity.
The alloy crankcase consists
of two main sections, each
containing one bank of cylinders.
The crankshaft runs in eight main
bearings and is driven by forged
connecting rods. For optimum
durability, we’ve used forged
aluminium pistons running in
Nikasil-coated aluminium liners
and featuring individual oil-spray
cooling. Key benefits include lower
frictional resistance and longer
service life.
The cylinder heads are made
from a lightweight alloy which
is extremely resistant to high
temperature. Each bank of
cylinders has two overhead
camshafts driving a set of four
valves – two inlet and two exhaust
– on each individual cylinder.
The valves are arranged in a ‘V’
configuration and feature a highly
efficient dual-spring design.
Engine performance is further
enhanced with the aid of bothVariable Turbine Geometry (VTG –
see page 32) and VarioCam Plus
(variable valve timing and lift
on inlet side – see page 38). The
benefits are not only greater
power and torque, but also better
fuel economy and lower emissions.
Dry-sump lubrication.
This classic dry-sump system
with separate oil reservoir
ensures consistent oil pressures
throughout the engine. In doing
so, it compensates for even the
most extreme and prolonged
gravitational loads.
After passing through the engine,
every drop of oil is returned
directly to the external reservoir.
The flow is driven by two pairs of
scavenge pumps in the cylinder
heads and a further two pumps in
the crankcase. Gas is removed
from the returning oil by means of
a defoaming device in the
reservoir. As a result, the oil
level in the reservoir remains
virtually constant at all times.
The oil is returned to the
lubrication points in the engine
by means of a dedicated
oil-feed pump. With a further
scavenge pump in each of the
twin turbocharger units, the
new 911 Turbo has a total of nineseparate pumps to drive the
lubrication system.
The oil level can be checked from
inside the car via the standard
on-board computer. This solution
is not only cleaner and more
convenient than a conventional
dipstick, it is also significantly
more accurate.
· 30 ·· 31 ·The new 911 Turbo |
Drive
Main rotating assembly and valve gear

vanes are opened further. By
varying the vane angle, it is
possible to achieve the required
boost pressure over the entire
engine speed range. As a result,
there is no need for excess-
pressure valves as found on
conventional turbocharged
engines.
· 34 · · 32 ·· 33 ·The new 911 Turbo |
Drive
Variable Turbine Geometry (VTG).
Creating the optimum turbo for every scenario.
known as ‘turbo lag’, means there
is virtually no turbocharging effect
at lower engine speeds. To
overcome this problem, the twin
water-cooled turbochargers on
the new 911 Turbo feature Variable
Turbine Geometry (VTG). With
this technology, the gas-flow from
the engine is channelled onto Larger turbo units, which create
lower back-pressure at higher rpm,
take considerably longer to spin
up under power due to the large
cross-sectional area and relative
inertia of the heavier turbine.
Generally, this type of turbo will
only be effective in the medium
rpm range. This phenomenon,
Turbocharger guide vane adjuster Turbocharger with Variable Turbine Geometry (VTG)
up easily to its optimum speed.
The key disadvantage of using
a smaller turbo is that the back-
pressure generated at higher
engine speeds causes a significant
reduction in performance.
Resistance is caused by the smaller
cross-sectional area through which
the exhaust is required to flow.
The 911 Turbo has always been
synonymous with performance.
Now the car is more capable than
ever thanks to a new twin turbo
system featuring Variable Turbine
Geometry (VTG).
On a conventional turbocharger,
the exhaust flow drives a turbine
that is connected to a compressor
in the air intake tract. By ‘squeezing’
the incoming air, the amount
of oxygen in a given volume isincreased. Since compression also
causes an increase in temperature,
the air must be passed through
an ‘intercooler’ unit. With more
oxygen present in each cylinder
charge, more fuel can be burnt
yielding greater energy. Since
higher exhaust pressures generate
corresponding loads on the intake
side, the intake pressure must
be carefully controlled in order
to protect the engine. On the new
911 Turbo, the ‘boost pressure’ islimited using ‘wastegate’ valves
that bypass excess pressure
around the twin exhaust turbines.
Another important factor is the
size of the turbo unit. Since a
smaller turbine has a lower mass,
it generally responds more quickly
to increasing pressure, spinning
the turbines via electronically
adjustable guide vanes. By
changing the vane angle, the
system can replicate the
geometry in all types of turbo,
large or small.
With Variable Turbine Geometry
(VTG), it is possible to achieve
higher turbine speeds, and thus
higher boost pressure, at lower
engine rpm. Cylinder charging issignificantly improved, with a
corresponding increase in both
power and torque. Maximum
torque is reached at lower rpm
and is retained across a wider rev
range. A full 620 Nm is available
from as low as 1,950 rpm up to
5,000 rpm. Every throttle input is
met with exceptional response
and phenomenal acceleration.
When the boost pressure reaches
its maximum value, the guide

· 36 · · 35 ·· 37 ·The new 911 Turbo |
Drive
Guide vanes open Guide vanes closedGuide vanes open Guide vanes closed
The capability of the engine can
be further enhanced by selecting
‘Sport’ mode on the optional Sport
Chrono Package Turbo (see page
60). Under full acceleration, the
boost is temporarily increased by
approximately 0.2 bar. During this
phase, the engine develops as
much as 60 Nm of additional
torque.
Matching the superlative
performance of the car is the
efficiency with which it is
generated. In spite of the increase
in power and torque, the new
911 Turbo offers a further
reduction in fuel consumption.
1
2
3
4
5
6
7
8
9
10
1. Turbine casing
2. Movable guide vanes
3. Turbine wheel4. Electric motor for guide
vane adjustment
5. Guide vane adjuster
6. Compressor casing7. Compressor wheel
8. Excess-pressure valve
9. Oil inlet
10. Coolant inlet340 500 540
580
620 660 700
220 240
260
280
300
1500
7500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
380 420
460
1000
Power (kW)
Engine speed (rpm)
620 Nm
120 140
160
180
200
Torque (Nm)
680 Nm
740 320
340 360380780 820860
353 kW (480 bhp)
911 Turbo
911 Turbo overboost

Engine cooling.
The 911 Turbo engine features
cross-flow water cooling with fully
integrated coolant management.
This technology ensures a
consistent flow of coolant to each
of the engine’s cylinders. All
coolant passages are integral to
the block, thus eliminating the
need for external hoses. Each
cylinder receives a fresh supply
of coolant which has not been
pre-warmed by the engine. As well
as improving reliability, this
helps to minimise maintenance
requirements. Waste heat from
the oil is transferred to the
coolant via two oil/water heat
exchangers. The coolant is routed
through twin radiator modules
ahead of the front wheels and a
centrally placed unit in the nose.
Engine management.
Optimum performance is assured
at all times with the aid of
the Motronic ME7.8.1 engine
management system. On the new
911 Turbo, this powerful ECU is
responsible for all engine-related
functions and assemblies (see
diagram). Key among these are
the Variable Turbine Geometry
(VTG), VarioCam Plus and
electronic throttle system – one
of the essential prerequisites
for the standard Porsche Stability
Management (PSM). The results:
optimum economy, emissions
and performance, regardless of
driving style.Another important task performed
by the engine management
system is cylinder-specific knock
control. By preventing pre-ignition
at high engine speeds, this
function can avert costly damage
to the pistons and cylinders. Since
temperatures tend to vary in
different parts of the engine, each
cylinder is monitored separately.
If a risk is detected, the individual
ignition timing is adjusted.
The EU-compliant on-board
diagnostics system provides
continuous fault detection and
early warning for the exhaust
and fuel supply systems. The
resulting benefits are active
prevention of harmful emissions
as well as consistent rates of
fuel consumption.
· 40 ·· 41 ·The new 911 Turbo |
Drive
Input data Used to regulate /control
Engine management system
(Motronic ME7.8.1)
Engine load
Pressure upstream from throttle
Throttle-valve angle
Engine speed (from crankshaft)
Camshaft phase angles
Throttle-pedal position
Lambda signal
Knock sensor signal
Ignition
Fuel injection
Throttle valve
Heating elements in lambda sensors
Fuel pump
Fuel-tank venting
CAN interface to
all-wheel drive control unit CAN interface to transmissionMoment interface to Porsche
Stability Management (PSM)
VarioCam Plus
– camshaft phase angle
– valve lift control
Electronic controller for
Variable Turbine Geometry (VTG)
Bypass valve
Secondary air injection
Engine-bay fan
Starter
On-board diagnostics
Air-conditioning compressor
Interface to instrument cluster
Radiator fans
Vehicle speed
Air-conditioning settings
Engine immobiliser status
Clutch pedal switch
Ambient air pressure
Temperatures
– coolant
– airflow upstream from throttle
– engine oil
– air in engine compartment
– ambient air
Exhaust-gas temperature

Fuel injection.
Fuel is supplied to each of the six
cylinders by means of sequential
fuel injection. The timing of each
injection and the volume supplied
to each bank of cylinders are
controlled by the Motronic ME7.8.1
engine management system.
Adjustments are based on a range
of variables, such as throttle
position, engine speed, boost
pressure, coolant temperature
and exhaust gas composition. Theresults are optimised combustion
and fuel consumption. A hot-film
air mass sensor monitors the
density of the incoming air to
ensure the optimum air/fuel
mixture, regardless of weather
and altitude.
Ignition system.
The 911 Turbo is equipped with
a static high-voltage ignition
system. Each individual plug has
a separate ignition coil, ensuring
perfect combustion every time.
The role of distributor is performed
by the engine management
system, which operates the coils
directly. The result: optimum
performance with minimal fuel
consumption.
· 42 ·· 43 ·The new 911 Turbo |
Drive

Porsche Communication
Management (PCM). This
comprehensive system features
satellite navigation with a
separate DVD drive in the
luggage compartment for
the single navigation disc.
The one-touch switches on the
centre console are logically
positioned for optimum ease of
use. All instruments are perfectly
placed within the driver’s field of
vision. The air-conditioning system
is fully automatic and features a
highly effective active carbon filter.
This added convenience gives
you greater freedom to enjoy the
driving experience.
The tinted front glass and generous
rear screen offer excellent fore-
and-aft visibility. The front side
windows have a water-repellent
finish, which automatically
disperses moisture and dirt.
The result: optimum visibility in
poor weather conditions.
Instruments.
The classic arrangement of five
round instruments provides a
clear overview of all key information.
The digital display in the centre-left
dial (speedometer) provides main
and trip odometer readings. The
central rev counter, featuring the
‘turbo’ logo, includes the standard
on-board computer display.
This multi-purpose field contains a
permanent digital speedometer
as well as the following optional
information: boost pressure,
average speed, average fuel
consumption, tyre pressure,
current radio station, navigation
instructions and remaining range
till empty. When ‘Sport’ mode
is selected on the optional Sport
Chrono Package Turbo, the
temporary increase in torque is
clearly indicated using an arrow
symbol in the boost pressure
display. The third display, in the
centre-right dial, contains a
clock and external temperature.
The dot-matrix technology used in
each of these displays provides
a high resolution for icons and
text. Design and legibility are
further enhanced with brilliant
white backlight illumination.
· 78 ·· 79 ·The new 911 Turbo |
Comfort
Interior.
For the pure enjoyment of performance.
The passenger compartment in the
new 911 Turbo is another example
of uncompromising design. As you
would expect, it offers the highest
standards of ergonomics, comfort
and quality. The seats, dashboard,
doors and rear side panels are
finished in leather as standard. Atthe centre of the cockpit is a new
gear lever design that’s exclusive
to the new 911 Turbo.
Other standard features include
a three-spoke sports steering
wheel offering 40 mm of
adjustment for both height and
reach. A three-spoke multi-function
steering wheel – available as
optional equipment – provides
direct access to audio, navigation
and (if fitted) telephone functions.
The standard audio package
is the latest evolution of

Antenna diversity.
The PCM package includes four
separate antennae which are
discreetly incorporated within the
windscreen glass. This simple
solution enables the twin-tuner
radio system to find the strongest
possible signal, thereby enhancing
FM reception.
On-board computer.
The PCM computer offers a wide
range of information, including
average fuel consumption, average
speed, range till empty, journey
time and external temperature.
It can also be used to view data
from the optional Tyre PressureMonitoring (TPM). The computer
is operated using a separate
control stalk, displaying key infor-
mation in the central instrument
dial. The same control stalk
is used to operate the timing
functions in the optional Sport
Chrono Package Turbo.
Electronic logbook.
This optional addition to PCM
enables automatic logging on
every journey of mileage, route
distance, date and time as well as
starting location and destination.
Data can be downloaded from
PCM via an infrared port and
processed on a computer using
software included with the
package. This easy-to-use option
fulfils all the requirements for
automatic logbooks as specified
by the German revenue authorities.
Telephone module.
The optional GSM telephone has
a 12-digit keypad and a hands-
free facility offering excellent callquality. The hands-free microphone
is located next to the steering
column and is ideally positioned
for the driver. The telephone
system supports SMS (text)
messaging as well as card-free
calls to emergency services. An
optional passive (keyless) handset
with leather-trimmed console
enables clearer communication
as well as greater privacy when
making a call.
CDC-4 CD autochanger.
This optional CD autochanger has
a total capacity of six audio
CDs and installs beneath a panel
in the luggage compartment.
An autochanger preparation is
included as standard.
· 88 ·· 89 ·The new 911 Turbo |
Comfort
Passive (keyless) handset