tire type PORSCHE 911 TURBO 2014 6.G Owners Manual
[x] Cancel search | Manufacturer: PORSCHE, Model Year: 2014, Model line: 911 TURBO, Model: PORSCHE 911 TURBO 2014 6.GPages: 300, PDF Size: 10.61 MB
Page 101 of 300
Instrument Panel and Multi-Function Display 99
Info
Oil measurement LimitsSettings
Station/Track
Answer/Reject/End
Phonebook
Previous calls
Received calls
Manual zoom Auto zoom3D map North up
Show destination/position
Destination input
Start/Stop route guidance
Since
Total
To destination
Fill info Tire typePartial/full load Comfort/standard pressure
Start StopRoundInt.
Torque
Current speed
Setting the speed
Menu scope
Audio
Vehicle menu
Upper line
PCM display
Lower line
Shift request
Brightness
Exterior lights
Interior lights
Wiper
Revers. opt.
Door lock/unlock
Comfort Entry
Auto Memory
Air flow
Vent. panel
Auto air circ.
Time
Date
DST (+01:00)
Time Chrono
Speedometer
Temperature
Tire pressure
Consumption
German/French...
ParkAssist
Warn. tones
◊ button
Messages
Service interval
Limit 1/Limit 2
Display
Light & Visibility
Locking
Air conditioning
Date & Time
Units
Language
Volume
Steering wheel op.
Fact. settings
Last destination
Stored destinations
POIs
Cont.
Reset
Vehicle
Audio
Telephone
Map
Navigation
Trip
Tire pressure
Allwheel
Chrono
G-Force
Performance
ACC
14_991_Turbo_21.book Seite 99 Mittwoch, 9. April 2014 2:19 14
Page 104 of 300
102 Instrument Panel and Multi-Function Display
Measuring the oil level after topping up engine oil or opening the engine compartment lid
The oil level can be checked after waiting for approx. 1 minute with the vehicle parked on a level surface and the engine at operating temperature.
If the engine compartment lid is opened when the engine is cold (e.g. in order to top up engine oil), the oil level cannot be displayed for a certain time.The message “ No information about oil level available at present ” appears on the multi- function display.fEngine oil should therefore only be topped up with the engine at operating temperature. This ensures short waiting times for the soonest possible oil level display.
Failure
If the oil-level indicator fails, the message “ Oil level measurement fault Consult a workshop Driving permitted ” appears on the multi-function display.
Setting speed limits
If a speed limit is preset and activated on the multi-function display, a warning message appears if the speed limit is exceeded.A speed limit can be used to remind the driver to keep to the maximum speed permitted for the tire type fitted to the vehicle, for example.
Setting a speed limit
You can either adopt the current speed of the vehicle or specify your own speed limit.
Activating and deactivating speed limits
Adjusting vehicle settings
Various vehicle settings can be modified in the “ Settings” submenu.
For information on modifying vehicle settings:fPlease see the chapter “VEHICLE SETTINGS ON THE MULTI-FUNCTION DISPLAY” on page 117.
Audio Menu
In the “ Audio” main menu, you can select a radio station either from the station list or the list of stored stations, depending on the settings, or a track from the active audio source, e.g. disk.
For information on adjusting audio menu settings:fPlease see the chapter “ADAPTING DISPLAY CONTENTS OF AUDIO MAIN MENU” on page 118.
1. Main menu “Vehicle” > “ Limits” and confirm.
1. Main menu “Vehicle” > “ Limits”
2.Select “Limit 1: ---” or “ Limit 2: ---“ and confirm.
3. Select “Current speed” or „ ---“ and confirm.
1. Main menu “Vehicle” > “ Limits”
2.Select “Limit 1: ---” or “ Limit 2: ---“ and confirm.
3. Select “Active”
4.Confirm your selection.
Limit is active.
Limit is not active.
1. Select “Audio” in the main menu and confirm.
2. Select the desired radio station or track and confirm.
14_991_Turbo_21.book Seite 102 Mittwoch, 9. April 2014 2:19 14
Page 109 of 300
Instrument Panel and Multi-Function Display 107
The warning light in the instrument panel lights up: – When a loss in pressure has been detected.– In the event of a defect in Tire Pressure Monitoring or a temporary fault.– When learning new fitted wheels/wheel transmitters, as long as the vehicle’s own wheels have not yet been recognized.
The tire pressure warning light on the instrument panel goes out only when the cause of the fault has been rectified.
Overview of tire pressure monitoring functions
Tire Pressure Monitoring offers the following functions: – Display of the actual tire pressure when stationary and while the vehicle is in motion.– Tire pressure warnings in two stages (yellow and red warning).– In the “TPMS” menu, the settings “Fill info” (display of the deviation from the required pressure, refill pressure), “Tire type”, “Full load” and “Comfort press.” are available when the vehicle is stationary.
Tire pressure display on the multi-function display
Selecting the TPMS function on the multi-function display
The “ TPMS” function displays the temperature- dependent tire pressures (actual pressures) in the four wheels.You can watch the tire pressure rise as the temperature increases while driving.
Information
This display of the actual pressures is only for information.fUnder no circumstances should the tire pressures be changed based on this display.
Information
After the ignition is switched on, it can take up to approx. 1 minute until all tire pressures are displayed. Dashes (-.-) appear instead of the tire pressures.
1. Select the “TPMS” main menu.
14_991_Turbo_21.book Seite 107 Mittwoch, 9. April 2014 2:19 14
Page 111 of 300
Instrument Panel and Multi-Function Display 109
Selecting tire type in the TPMS menu (type and size of fitted tire)
Exceeding the maximum tire speed could result in a tire burst, causing loss of control of the vehicle.fAlways observe the permissible maximum speed of the respective tire.fPorsche recommends obeying all traffic laws at all times to maintain the safety of yourself and all vehicle occupants.
Incomplete entries or selection of the wrong tires on the multi-function display affect correct indication of warnings and messages.fThe settings must be updated in the “ Tire pressure ” menu after changing a wheel, filling with tire sealant or adding air (after previous warning “ Check tires”). Please see the chapter “RED WARNING – “CHECK TIRES”” on page 112.
The new tire type and tire size must be selected even if the settings for the new set of wheels are the same as for the old wheels.
Option is selected.
Option is not selected.
The selected setting appears in the TPMS menu in the line “Tire type” (e.g. “20" (W)” with the setting option “20" Winter”).
Tire selection has only been completed successfully when the following message appears on the multi-function display (example):
“No tire pressure monitoring System is learning” .fPlease see the chapter “CHANGING A WHEEL AND REPLACING TIRES” on page 113.
Information
The message “Action cancelled” appears if the setting process is interrupted.
All entries made up to this point are lost, and the original settings remain in effect.
Before fitting tires with dimensions that are not already stored in the multi-function display, the missing information should be added to the multi-function display by your authorized Porsche dealer.fPlease contact an authorized Porsche dealer.fUse only tires approved by Porsche.
The available items in the tire pressure menu depend on the model type. For this reason, some of the selection options shown here may not be available on your multi-function display.
Exceeding Maximum Rated Tire Speed
Entering Tire Data and Display
WARNINGh
WARNINGh
1. Main menu “TPMS”.
2.Confirm “TPMS”.
3.Select “Tire type” and confirm.
4.Select “20" Summer” or “20" Winter” and confirm.
14_991_Turbo_21.book Seite 109 Mittwoch, 9. April 2014 2:19 14
Page 112 of 300
110 Instrument Panel and Multi-Function Display
Selecting load in the TPMS menu
fAdapt the pressure of the tires to the selected load type.Please see the chapter “VIEWING FILL INFO IN THE TPMS MENU” on page 108.
Information
If this menu is not displayed, the specified tire pressures are valid for all types of vehicle load.
Selecting comfort/standard pressure in the TPMS menu
For speeds up to 165 mph (270 km/h), the tire pressures can be reduced to increase suspension comfort.If you select “ Comfort press.”, the TPMS system automatically uses lower pressure values when monitoring tire pressure.
If “ Comfort press.” is deactivated or standard pressure is activated, the standard required pressures suitable for speeds up to the maximum vehicle speed are automatically monitored.
The comfort tire pressures are included in the technical dataorin “ Fill info” when the “Comfort press.” menu is activated.
Prolonged driving at low tire pressure or even short-term driving at high speeds on tires which have too low a pressure is likely to result in a loss of control of your vehicle, either due to a failure to maintain directional control under side loads or due to tire failure.
Tires are inflated to comfort pressure at the factory, which is not suitable for driving at very high speeds.fAlways adjust the pressure in the tires to the standard pressure setting when driving at higher speeds.fRemember to adjust the setting in the Tire Pressure Monitoring System accordingly.
1. Main menu “TPMS”.
2.Confirm “TPMS”.
3. Full load
Full load is selected.
Full load
Partial load is selected.
Change or select the desired load type by enabling or disabling the “ Full load” box.
1.Main menu “TPMS”.
2.Confirm “TPMS”
3. Comfort pressure
Comfort pressure is selected.
Comfort press.
Standard pressure is selected.
Change or select comfort pressure/standard pressure by enabling or disabling the “ Comfort pressure” box.
Low Tire Pressure Loss of Control
WARNINGh
14_991_Turbo_21.book Seite 110 Mittwoch, 9. April 2014 2:19 14
Page 223 of 300
Maintenance and Car Care 221
Radiator fan, engine compartment blowers
The engine-compartment blowers are mounted under the engine compartment lid.After the engine is switched off, the engine compartment temperature is monitored for approx. 30 minutes.During this period, and depending on temperature, the engine-compartment blowers may continue to run or start to run.fCarry out work in this area only with the engine off and exercise extreme caution.
The radiators and radiator fans are in the front of the vehicle.The radiator fans in the front of the vehicle may be operating or unexpectedly start operating when the engine is switched on.fCarry out work in these areas only with the engine switched off.fTake great care to ensure that parts of the body, items of clothing or jewelery cannot be drawn in by the radiator fan, engine-compartment blower, drive belt or other moving parts.
Measurements on test stands
Performance test
Performance tests on roller-type test stands are not approved by Porsche.
Brake tests
Brake tests must be performed only on roller-type test stands.
The following limit values must not be exceeded on roller-type test stands: – Test speed 4.7 mph (7.5 km/h)– Test duration 20 seconds
Testing the electric parking brake
Electric parking brake tests on the brake test stand must only be performed with the ignition switched on and with the Porsche Doppelkupplung selector lever in position N. The vehicle switches automatically to brake test stand mode, in which the electric parking brake can be tested.The message “ Electric parking brake in service mode ” appears on the multi-function display in the instrument panel.
Balancing wheels on the vehicle
During finish balancing of the wheels, the entire vehicle must be lifted and the wheels must be free to turn.
Engine Oil
It is important to perform oil changes regularly in accordance with the intervals specified in your Maintenance Schedule .
Engine oil consumption
It is normal for your engine to consume oil. The rate of oil consumption depends on the quality and viscosity of oil, the speed at which the engine is operated, the climate, road conditions as well
as the amount of dilution and oxidation of the lubricant.
If the vehicle is used for repeated short trips, and consumes a normal amount of oil, the engine oil measurement may not show any drop in the oil level at all, even after 600 miles (1000 km) or more. This is because the oil is gradually becoming diluted with fuel or moisture, making it appear that the oil level has not changed. The diluting ingredients evaporate out when the vehicle is driven at high speeds, as on an expressway, making it then appear that oil is excessively consumed after driving at high speeds.
If the conditions you drive your vehicle in are dusty, humid, or hot, the frequency of the oil change intervals should be greater.
If the vehicle is driven at a high rate of speed, climatic conditions are warm, and the load is high, the oil should be checked more frequently, as driving conditions will determine the rate of oil consumption.– The engine in your vehicle depends on oil to lubricate and cool all of its moving parts. Therefore, the engine oil should be checked regularly and kept at the required level.– Make it a habit to have the engine oil level checked with every refueling.– The oil pressure warning light is not an oil level indicator. The oil pressure warning light indicates serious engine damage may be occurring when lit, if engine rpm is above idle speed.
Radiator Fans, Engine Compartment Blowers
WARNINGh
14_991_Turbo_21.book Seite 221 Mittwoch, 9. April 2014 2:19 14
Page 238 of 300
236 Maintenance and Car Care
If cleaning agents (e.g. wheel cleaning agents) come into contact with the brake disks, the resulting film on the brake disks can impair braking performance.fMake sure that no cleaning agent comes into contact with the brake disks.fIf cleaning agent has come into contact with the brake disks, clean the brake disks thoroughly with a strong jet of water.fPaying attention to any road users behind you, dry the brake disks by applying the brakes.
Stainless steel tailpipes
Stainless steel tailpipes can discolor due to soiling, strong heat and combustion residues.
The original shine can be achieved again using commercially available metal luster paste or metal polish.
Cleaning door, roof, lid and window seals
The lubricant coating on the inner door seals may be damaged by unsuitable cleaning and care agents.fDo not use any chemical cleaning agents or solvents.fDo not use any preservative agents.
fWash dirt (e.g. abrasion, dust, road salts) from all seals regularly using warm soapy water.fIf there is a risk of frost, protect the outer door seals and the lid and flap seals against freezing into place with a suitable care product.
Leather care
The natural surface markings of leather, e.g. creases, healed scars, insect sting marks, structural differences and slight variations in shade and grain add to the attractiveness of the high-quality natural leather product.
Observe the following care instructions:
The leather will be damaged by the use of unsuitable cleaning and care agents and by inappropriate treatment.fDo not use caustic cleaners or hard cleaning objects!fMake sure that perforated leather does not get wet on its reverse side.fRemove water drops from the leather without delay.
fClean all types of leather regularly to remove fine dust using a soft, damp, white woolen cloth or a commercially available microfiber cloth.fRemove heavy contamination (not water or moisture stains) with a leather cleaner.Always read the instructions for use given on the containers.We recommend Porsche leather care liquid.fTreat cleaned leather only with a leather care product.We recommend Porsche leather care liquid.
Seats with seat ventilation
Care instructions for water or moisture stains.
Rain water or moisture can stain the perforated leather.
Removing water and moisture stains
Preconditions: – Seat heating and seat ventilation must be switched off.– No direct sunlight.– Do not use leather cleaners or care products to remove water and moisture stains.fBlot the entire seat or backrest surface using a clean, absorbent sponge and distilled water.Make sure that the perforated leather does not get wet on its reverse side.fAllow the seat covering to dry completely at room temperature out of direct sunlight.Do not dry the seat covering by switching on the seat heating and seat ventilation.fOnce dry, wipe the seat covering with a dry, lint-free cloth.
Cleaning carpet, floor mats
fUse a vacuum cleaner or a brush (not too soft) for cleaning.fHeavy dirt and stains can be removed with a stain remover.We recommend Porsche stain remover.
To protect carpets, the Porsche range of accessories includes mats of the correct size and with the appropriate fastening.
Cleaning Agents on Brake Disks
WARNINGh
NOTICE
NOTICE
14_991_Turbo_21.book Seite 236 Mittwoch, 9. April 2014 2:19 14
Page 243 of 300
Minor Repairs 241
If the vehicle is not secured, or incorrectly secured, during repair work, it could move unexpectedly or fall from the car jack or car lift.fBe alert and cautious around the engine at all times while it is running. If you have to work on the engine while it is running, always apply the electric parking brake and put the PDK selector lever in position P or N.fAlways support your car with safety stands if it is necessary to work under the car. The jack supplied with the car is not adequate for this purpose.Switch off level control of air suspension and height adjustment.Please see the chapter “RAISING THE VEHICLE WITH A LIFTING PLATFORM, TROLLEY JACK OR STANDARD JACK” on page 254.fJack up the vehicle only at the specified jacking points on the underside of the vehicle.fNever start the engine when the vehicle is jacked or lifted up. Vibration from the engine could cause the vehicle to fall.fWhen working under the car without safety stands but with the wheels on the ground, make sure the car is on level ground, the wheels are blocked, and that the engine cannot be started.Withdraw ignition keys (switch ignition off in vehicles that have Porsche Entry & Drive).
Information
fIncomplete or improper servicing may cause problems in the operation of the car. If in doubt about any servicing, have it done by your authorized Porsche dealer.Improper maintenance during the warranty period may affect your Porsche warranty coverage.fSome countries require additional tools and special spare parts to be carried in your vehicle. Please make enquiries before driving abroad.
T
The engine-compartment blowers are mounted under the engine compartment lid.After the engine is switched off, the engine compartment temperature is monitored for approx. 30 minutes.During this period, and depending on temperature, the engine-compartment blowers may continue to run or start to run.fCarry out work in this area only with the engine off and exercise extreme caution.
The radiators and radiator fans are in the front of the vehicle.The radiator fans in the front of the vehicle may be operating or unexpectedly start operating when the engine is switched on.fCarry out work in these areas only with the engine switched off.fTake great care to ensure that parts of the body, items of clothing or jewelery cannot be drawn in by the radiator fan, engine-compartment blower, drive belt or other moving parts.
Measurements on test stands
Performance test
Performance tests on roller-type test stands are not approved by Porsche.
Brake tests
Brake tests must be performed only on roller-type test stands.
The following limit values must not be exceeded on roller-type test stands: – Test speed 4.7 mph (7.5 km/h)– Test duration 20 seconds
Testing the electric parking brake
Electric parking brake tests on the brake test stand must only be performed with the ignition switched on and the Porsche Doppelkupplung selector lever in position N. The vehicle switches automatically to brake test stand mode, in which the electric parking brake can be tested.The message “ Electric parking brake in service mode ” appears on the multi-function display in the instrument panel.
Balancing wheels on the vehicle
During finish balancing of the wheels, the entire vehicle must be lifted and the wheels must be free to turn.
Information
The tools required for changing a wheel (e.g. jack, wheel bolt wrench, assembly aids) are not supplied as standard with the vehicle. Your authorized Porsche dealer will be pleased to advise you.
Failure to Secure VehicleWARNINGh
Radiator Fans, Engine Compartment Blowers
WARNINGh
14_991_Turbo_21.book Seite 241 Mittwoch, 9. April 2014 2:19 14
Page 250 of 300
248 Minor Repairs
Tire life
Tire life depends on various factors, i.e., road surfaces, traffic and weather conditions, driving habits, type of tires and tire care.fInspect your tires for wear and damage before driving off. If you notice uneven or substantial wear, wheels might need alignment or tires should be balanced or replaced.
Tire wear
The original equipment tires on your Porsche have built-in tire wear indicators. They are molded into the bottom of the tread grooves and will appear as approximately 1/2 in. (12 mm) bands when the tire tread depth is down to 1/16 of an in (1.6 mm).
When the indicators appear in two or more adjacent grooves, it is time to replace the tires. We recommend, however, that you do not let the tires wear down to this extent. Worn tires cannot grip the road surface properly and are even less effective on wet roads.
In the United States, state laws may govern the minimum tread depth permissible. Follow all such laws.
Driving on worn tires can result in loss of control of the vehicle and could cause serious personal injuries or death.fDo not drive with worn tires or tires showing cuts or bruises as they may lead to sudden deflation and loss of control which could cause severe personal injury.fSpecialized high performance tires on high performance sports cars exhibit more wear than those on a family sedan, or even a high performance sedan. Therefore, it is important to check your tire
pressure and condition at least every two weeks.
fIf you notice that tires are wearing unevenly, consult your authorized Porsche dealer.
Uneven wear may not always be due to improper wheel alignment. It can be the result of individual driving habits such as cornering at high speeds. If the tire pressure is not checked and adjusted regularly, abnormal tire wear can also occur.
Tire care
fAvoid damaging tires and wheel rims.fIf you must drive over a curb or other obstacle, drive slowly and at an obtuse angle.fCheck tires for uneven wear and damage before driving off.fRemove embedded material.fReplace worn or damaged tires immediately.fKeep oil, fuel, brake fluid, etc. away from tires.fReplace missing valve stem caps.fKeep tires inflated correctly.fWash tires when washing the vehicle. Also clean inner side of wheels.fDo not use abrasive cleaners when washing the wheels.fCheck wheel rims for corrosion.fRemove road salt, if driving in winter.
Tire damage, puncture
fPlease see the chapter “HIGH-PRESSURE CLEANING EQUIPMENT, STEAM CLEANERS” on page 232.
Driving the vehicle with low tire pressure increases risk of a tire failure and resulting loss of control. Furthermore, low tire pressure increases the rate of wear of the affected tires.fCheck tires – including sidewalls – regularly for foreign bodies, nicks, cuts, cracks and bulges.fAfter driving off road, examine tires for signs of damage such as cuts, tears, bulges or foreign objects stuck in the tread. Replace a damaged tire if necessary.fCross curb edges slowly and at right angles if possible. Avoid driving over steep or sharp curbs.fIn cases of doubt, have the wheel (particularly the inner side) checked by an authorized Porsche dealer.
In case of tire damage, where it is uncertain whether there is a break in the ply with all its consequences or tire damage caused by thermal or mechanical overloading due to loss of pressure or any other prior damage, we recommend that the tire be replaced for safety reasons.
If one faulty tire is replaced it should be noted that the difference in tread depth on one axle must not exceed 30%. Handling inconsistencies may result.fRecommendation: Replace both tires on one axle so that no handling inconsistencies may result due to different tread depths.fPerform a visual inspection if necessary.
Excessively-worn TiresDANGERh
Damaged Tire CheckDANGERh
14_991_Turbo_21.book Seite 248 Mittwoch, 9. April 2014 2:19 14
Page 251 of 300
Minor Repairs 249
Tire replacements
fUse only tire makes and types tested by Porsche.
If you do not use a Porsche recommended replacement tire, make sure that you purchase your new tires from a reputable tire dealer and that the dealer complies with all manufacturers warnings for those tires.
Only tires with the same manufacturer and with the same specification code (e.g. “N0”, “N1”…) should be mounted on the vehicle.
Before mounting new tires, check with your Porsche dealer about the current release status.
Use tires with “ZR” quality standards. There are currently no standards concerning tire strength at speeds above 150 mph (240 km/h).
Tires should be replaced no less than on one axle at the time. Only tires of the same make and type must be used. Mixed tires are not permissible and will affect vehicle performance, safety, and can affect vehicle warranty.
Porsche dealers can recommend the most current replacement tire options for your vehicle.
Initially, new tires do not have their full traction. You should therefore drive at moderate speeds during the first 60 - 120 miles (100 - 200 km).
Tires must always remain on the same side of the vehicle.When wheels are removed, the direction of rotation and position of each wheel should be marked.
If new tires are installed only on one axle, a noticeable change in handling occurs due to the different tread depth of the other tires. This happens especially if only rear tires are replaced. However, this condition disappears as the new tires are broken in.fPlease adjust your driving style accordingly.
Installation of new tires should only be done by a qualified tire technician.
Valves
fUse only plastic valve caps.fPlease read the fitting and replacement instructions regarding metal valves.fUse original Porsche metal valves only.fValve inserts with valve caps protect against soiling.Soiled valve inserts can cause a gradual loss of air.
Parking at the curb
Hard impacts against curbs (or traffic islands) are dangerous and may cause hidden tire damage which is not noticeable until later. Such damage can result in accidents at high speeds. Depending on the force of impact, the edge of the rim can also be damaged.fAfter such an impact, have the wheel checked by an expert.fIf you must drive over a curb or other obstacle, drive slowly and at an obtuse angle. Exercise care when parking along curbs.
Information
Tire repairs are not permissible under any circumstances.
Curb Impact / Tire Damage
DANGERh
14_991_Turbo_21.book Seite 249 Mittwoch, 9. April 2014 2:19 14