ABS PORSCHE BOXSTER S 2013 3.G Information Manual

2 1
52
53
Fo r w ar d t h r u s t |
Chassis
1 Front axle of the Boxster S
2 Rear axle of the Boxster SIt features a variable steering ratio and
responds precisely and directly as well as
providing customary agility, a high level of
comfort and plent y of direct feedback from
the road. Power steering Plus, the optional
speed -sensitive power-steering system, mini -
mises steering ef fort during manoeuvring
and parking.
eliminates the need for servicing, both of
which also have benefits for the environ-
ment.
The Boxster concept was designed to
offer outstanding cornering performance.
The steering system delivers and it even
improves the typical Porsche steering feel.
mechanical steering system. Whereas
a conventional hydraulically assisted
steering system draws engine
power con-
tinuously, the electric motor
in the electro-
mechanical arrangement uses energy
only when the steering
wheel is actually
turned. As a result, fuel consumption is
reduced and the absence of hydraulic fluid
Steering.
One definition of efficiency is a system
that works only when it is needed, and then
does so in a particularly effective way.
This was the guiding principle for our
engineers in the development of the electro-
The results are tangible: increased driving
stability, enhanced driving pleasure and
improved performance. PASM automatically reverts to the
original, harder rating. If ‘Normal’ mode is
selected and the driver’s st yle becomes
more assertive, PASM switches to a
harder rating to increase driving stability
and road safet y.
In ‘Sport ’ mode, the suspension is set
to a harder damper rating. On uneven
roads, PASM immediately switches
to a softer rating, thereby improving
contact bet ween the t yres and the
road. When the road surface improves,

6061

Porsche Stability Management (PSM).

Porsche Stabilit y Management (PSM) is fit-
ted as standard. This system automatically
maintains stability even at the limits of
dynamic driving performance. Sensors
continuously monitor the speed, yaw
velocit y and lateral acceleration of the
Fo r w ar d t h r u s t |
Chassis
therefore achieved much sooner. Brake
assist detects a panic braking situation
and generates the brake pressure
required for maximum deceleration.
precharging of the brake system and
brake assist. If you suddenly release the
accelerator pedal, PSM automatically
prepares for your next action: the braking
system is precharged so that the brake
pads are already in light contact with the
brake discs. Maximum braking power is

If you prefer an ever sportier drive, PSM
can be switched off. For your safet y,

however, PSM remains set to intervene if
the vehicle is braked and ABS assistance

is required. ABS and ABD remain switched
on at all times. Also included with PSM
are engine drag torque control (EDC),
Under acceleration on wet or low-grip
road surfaces, PSM improves traction –
as well as agilit y and safet y – using the
automatic brake differential (ABD) and
antislip regulation (ASR). Integrated ABS is
designed to minimise braking distances. car. Using this information, PSM is able
to calculate the actual direction of travel
at any given moment. If the car begins
to oversteer or understeer, PSM applies
selective braking on individual wheels in
order to restore stability.

3 2 1
6465
1 Sport Chrono display on sports steering wheel
in conjunction with PDK
2 Sport Chrono stopwatch
3 SPORT and SPORT PLUS but tonswhile torque boosts during gear changes
provide the maximum acceleration availa -
ble. This involving experience is further
enhanced by overrun downshifts
and the
throttle-blip function for uncompromising
driving pleasure.
An additional display in the steering
wheel or either the instrument cluster
indicates the SPORT or SPORT PLUS
but tons and, with PDK, Launch Control
have been activated. In conjunction with
the optional Porsche Communication
Management (PCM), a special display ena -
bles you to view, store and evaluate lap
times or other driving times. It shows the
total driving time, lap distance, lap num -
ber and lap times recorded so far.
Performance is further intensified by
dynamic gearbox mounts. Read on to find
out more.
be set to standby while the car is still in
SPORT PLUS mode. For safet y, it is set

to intervene automatically only when ABS
assistance is required.
The throt tle-blip function produces even
sportier gearshifts. A managed burst of
throt tle ensures smooth load changes for
increased stabilit y and makes the gearshift
process an even more engaging experience.
In conjunction with optional PDK, the Sport
Chrono Package comes with t wo additional
functions for a sport y drive that borders

on a motorsport experience. The first
is ‘Launch Control’, which is designed to
produce a racing start.
The second function is the involving

‘motorsport- derived gearshif t strategy’.
Using this, Porsche Doppelkupplung (PDK)

is geared up for the shortest possible
shift times and optimum shift points,
Sport Chrono Package.
Time is precious and every hundredth
of a second counts. The optional Sport
Chrono Package makes your driving experi
-
ence priceless thanks to an even sportier
tuning of throt tle response and handling
characteristics.
The package comprises dynamic gear-
box mounts, a performance display, a
digital and analogue stopwatch and the
SPORT PLUS but ton. When this is pressed,
optional Porsche Active Suspension
Management (PASM) switches to ‘Sport ’
mode for harder damping and more
direct steering and therefore, even more
intensive road holding.
The trigger threshold for PSM is raised.
Agilit y is perceptibly enhanced when

braking for corners with PSM, allowing
even sportier braking and exit acceleration.
For even greater dexterit y, PSM can

7071
The wider view |
Safety
are needed. Not only does this provide a
high level of safet y for the driver, it offers
a considerable weight saving compared
with the bodyshell of the previous model.
This is why the doors of both luggage
compartment lids are made from light -
weight aluminium.
The crumple zones in the front and
rear aprons feature integral light-alloy
bumpers, while impact absorbers offer
additional safet y. For the protection of
occupants, energy-absorbing padding is
used selectively in important areas within
the passenger cell.an ingenious lighting concept featuring
powerful headlights, by assistance

systems that give you the information
you need and by an interior that provides
reliable protection in the event of an

accident.
Engineered body design.
The bodyshell of the Boxster models is
based on an intelligent light weight princi -
ple involving the composite construction
of aluminium and steel. The use of dis -
similar but precisely combined compo -
nents makes it possible to utilise specific
material properties exactly where they
It’s the same in the office as it is on the road:
performance needs a stable concept.
Safety.
On the road to independence, there is no
room for the slightest element of doubt.
The active and passive safet y concept

of the Boxster models is designed to
ensure driving pleasure through peace

of mind.
Safet y is founded on a precisely engi
-
neered chassis and high-performance
braking system. It also involves intelligent
control systems, such as Porsche Stability
Management (PSM), and depends on

an innovative body construction designed
to keep your roadster stable without

diminishing its agilit y. It is enhanced by

7879For fuel consumption, CO2 emissions and efficiency class please refer to page 131.
The wider view |
Environment
Servicing.
Long service intervals offer clear advan -
tages. For you, they reduce costs and
save time. For the environment, they
assist in the sparing use of consumables
and replacement parts. For full details
of service intervals, please refer to the
separate price list.
the fuel system has been minimised
thanks to the active carbon filter and the
multilayered material from which the fuel
tank is made. All fuel lines are made from
multilayered plastic, steel or aluminium.
Fuel.
Both
Boxster models are designed to
operate on fuels with an ethanol content
of up to 10 %. Ethanol has a positive
impact on the CO
2 balance since the
plants grown for the production of this
biofuel also absorb CO
2 from the atmos -
phere. The release of hydrocarbons from
technical requirements. In short, the

Boxster is around 95 % recoverable.
In addition, Porsche uses a high propor -
tion of environmentally friendly water-
based paints. For us, environmental
protection does not begin at the end of
a vehicle’s life. It starts at the planning
and development stage.
On the ecological side, all materials used
are meticulously selected. We use only
innovative and environmentally friendly
components. All synthetic components
are easily recyclable and each material

is labelled to facilitate its separation for
recycling. The reduction in the number
of plastic variants helps to ensure more
ef ficient recycling. Recycled plastics are
used where they meet our exacting
On the technical side, various compo
-
nents are made with a high proportion of
aluminium, magnesium, plastics and
super high-strength sheet steel. The
materials used have been selected for
their abilit y to withstand load, yet they
are considerably lighter than conventional
steel. As a result, the bodyshell of the
Boxster models has a light alloy content
of approximately 46 %.
Fuel economy and recycling.
Intelligent lightweight construction has
been fundamental to the Porsche identit y
since 1948 for both technical and ecolog -
ical reasons. This forms the basis for
achieving low fuel consumption values in
conjunction with outstanding perfor -
mance.

130131Technical data
Boxster Boxster S
Weights
Manual/PDK Manual/PDK
Unladen weight (DIN) 1,310 kg / 1,340 kg 1,320 kg / 1,350 kg
Unladen weight (EC)
1)1,385 kg / 1,415 kg 1,395 kg / 1,425 kg
Pe r m issi b le gross we igh t 1,645 kg / 1,675 kg 1,655 kg / 1,685 kg
PerformanceManual/PDK Manual/PDK
Top speed 264 km/ h / 262 km/ h 279 km/ h / 277 km/ h
0–100 km/h 5.8 secs / 5.7 secs 5.1 secs / 5.0 secs
with Sport Chrono Package (in conjunction with PDK) – / 5.5 secs – / 4.8 secs
0 –16 0 k m / h 13.1 secs / 13.0 secs 11.0 secs / 10.9 secs
with Sport Chrono Package (in conjunction with PDK) – / 12.7 secs – / 10.7 secs
Flexibilit y (80 –120 km/ h) in 5th gear 8.2 secs / – 6.7 secs / –
Overtaking acceleration (80 –120 km/ h) – / 3.7 secs – / 3.1 secs
Fuel consumption/emissions 2)Manual/PDK Manual/PDK
Urban in l/100 km 11.4 / 10.6 12.2 / 11.2
Extra urban in l/100 km 6.3 / 5.9 6.9 / 6.2
Combined in l/100 km 8.2 / 7.7 8.8 / 8.0
CO
2 emissions g/km 192 / 180 206 / 188
Efficiency classManual/PDKManual/PDK
Efficiency class (Germany) G / F G / F
Efficiency class (Switzerland) G / F G / F
Dimensions/aerodynamics
Length4 , 374 m m 4 , 374 m m
Width (including exterior mirrors) 1,8 01 m m (1,978 m m) 1,8 01 m m (1,978 m m)
Height 1, 282 m m 1, 281 m m
Wheelbase 2,475 mm 2,475 mm
Luggage compartment volume
(German Car Manufacturers’ Assoc.) front/rear 150 litres / 130 litres 150 litres / 130 litres
Tank capacity (refill volume) approx. 64 litres approx. 64 litres
Drag coef ficient c
w = 0.30 cw = 0.31
1)
Weight is calculated in accordance with the relevant EC Directives and is valid for vehicles with standard specification only. Optional equipment increases this figure. The figure given includes 68 kg for the driver and 7 kg for luggage.2) Data determined in the NEDC (New European Driving Cycle) in accordance with the Euro 5 (715/2007/ EG, 692/2008/ EG, 566/2011/ EG and ECE- R 101) measurement method. The figures do not refer to an individual vehicle nor do they constitute part
of the of fer. They are intended solely as a means of comparing dif ferent t ypes of vehicle. You can obtain further information about individual vehicles from your Porsche Centre. Fuel consumption calculated for vehicles with standard specification only.
A vehicle‘s fuel consumption and CO
2 emissions depend not only on its ef ficient use of fuel, but also on driving st yle and other non -technical factors. Actual consumption and per formance may var y with items of optional equipment.
Boxster Boxster S
Engine
C y linders 6 6
Displacement 2,70 6 c m
33,436 cm3
Max. power (DIN)
at rpm 195 kW (265 hp)
6,70 0 232 kW (315 hp)
6,70 0
Max. torque
at rpm 280 Nm
4,500 – 6,500 360 Nm
4,500–5,800
Compression ratio 12 . 5:1 12 . 5:1
Transmission
LayoutRear-wheel drive Rear-wheel drive
Manual gearbox 6-speed 6-speed
PDK (optional) 7-speed 7-speed
Chassis
Front axleLightweight spring-strut suspension Lightweight spring-strut suspension
Rear axle Lightweight spring-strut suspension Lightweight spring-strut suspension
Steering Variable steering ratio, power-assisted (electromechanical) Variable steering ratio, power-assisted (electromechanical)
Turning circle 10.9 8 m 10.9 8 m
Brakes Four-piston aluminium monobloc fixed calipers front and rear,
discs internally vented and cross-drilled Four-piston aluminium monobloc fixed calipers front and rear,

discs internally vented and cross-drilled
Vehicle stabilit y system Enhanced Porsche Stabilit y Management (PSM)
with ASR, ABD MSR and ABS 9.0 Enhanced
Porsche Stabilit y Management (PSM)
with ASR, ABD MSR and ABS 9.0
Anti - lock braking system A BS 9.0 A BS 9.0
Standard wheels Front: 8 J x 18 ET 57, Rear: 9 J x 18 ET 47 Front: 8 J x 19 ET 57, Rear: 9.5 J x 19 ET 45
Standard tyres Front: 235/45 ZR 18, Rear: 265/45 ZR 18 Front: 235/40 ZR 19, Rear: 265/40 ZR 19
Technical data