torque PORSCHE CAYNNE 2008 1.G Information Manual

Controlling fuel delivery for optimum combustion.
Direct fuel injection (DFI).
Drive
designed to improve power, torque
and emissions. The swirling of the
injected fuel creates a homogenous
air/fuel mix, thereby enhancing
combustion.
At engine speeds up to 3,500 rpm,
a double injection process is used.
Here, the required fuel volume
is delivered in two successive
injections per working stroke. The
results are faster catalyst warm-up
and increased torque in the upper
load range. All four Cayenne engines feature
direct fuel injection.
As the name suggests, fuel is
injected directly into each
combustion chamber using electro-
magnetic injectors offering
extremely high precision in
terms of both timing and volume.
A high-pressure pump provides
the necessary pressure of up to
120 bar.
The injector position and spray
geometry have been carefully
From road to racetrack. At the push of a button.
‘Sport’ button.
Throttle response in ‘Sport’ mode
Throttle response
in ‘Normal’ mode
Both sets of characteristicsare dependent on engine
speed.
Pedal travel (%)
(%) Torque
(as percentage of maximum)
All Cayenne models have a
standard ‘Sport’ function with
a choice of comfort-oriented
(‘Normal’) or high-performance
(‘Sport’) setup.
When ‘Sport’ mode is enabled
using a button on the centre
console, the engine management
system selects a more ‘aggressive’
map for the electronic throttle.
The pedal response is quicker
and the engine more dynamic
and direct. On vehicles with
Tiptronic S, upshifts are performed
later, downshifts earlier. The
chassis control systems PASM
and PDCC (if present) are also
set to ‘Sport’ mode. Cars with
air suspension are lowered to
Low Level I, creating a firmer
ride, more positive turn-in and
better contact with the road.
The ‘Sport’ sound mode on the
sports exhaust system (standard
on Cayenne GTS; optional on
Cayenne S with Tiptronic S) is
also enabled when ‘Sport’ mode
is selected.
‘Sport’ button on centre console Comparison of electronic throttle map in ‘Normal’ and ‘Sport’ mode
By mixing the fuel and air directly
in the combustion chamber, DFI
contributes to engine cooling.
As a result, it was possible
to increase the compression
ratio and therefore output and
efficiency.
The engine management system
regulates the injection process
based on changing output require-
ments. Oxygen sensor circuits
are used to monitor emissions
and minimize impact on the
environment (see page 60). This
also reduces ownership costs.
· 51 · · 50 ·

Plus selects the higher lift setting
and retards valve timing.
At medium revs and minimal
load, the valve lift is lowered and
timing advanced to minimise
fuel consumption and emissions.
At low engine speeds in particular,
VarioCam Plus significantly
The V6 engine in the Cayenne
features variable valve timing on
both inlet and exhaust.
The camshaft phase angles are
continuously varied by the engine
Increasing torque.
Reducing fuel consumption.
VarioCam Plus in the V8 and V8 turbo engines. The epitome of adaptability. And that’s just the engine.
Variable valve timing in the V6 engine.
management system via rotary-
vane
adjusters.
Each cylinder has four valves
actuated by roller cam followers
featuring hydraulic valve clearance
adjustment. The results: high
specific power and torque – even
at low engine speeds. Above all,
this technology improves fuel
economy while further reducing
emissions.
Drive
improves fuel economy. To achieve
maximum power and torque, the
valve lift is raised and the timing
advanced.
Overall, the system offers
greater reserves of power and
torque with relatively modest
fuel consumption.
VarioCam Plus creates two engines
out of one by steplessly adjusting
the inlet valve timing and lift.
The system differentiates between
normal road usage and performance
driving, adapting seamlessly as
driver inputs change. All functions
are automatically controlled by
the engine management system.
All
you experience is responsive
acceleration and ultra-smooth
running characteristics.
The valve lift system consists of
electro-hydraulically switchable
tappets.
Inlet valve timing is steplessly
varied using rotary-vane adjusters.
To improve response when starting
from cold for example, VarioCam
· 53 · · 52 ·VarioCam Plus (V8 engines)

There is one fuel that will always be free.
Which is why we make the most of it.
Air intake system.
The Cayenne models are all
equipped with a resonance air
intake system. This simple
technology uses the pressure
waves generated by the inlet
valves to ‘force’ air into the engine.
The effect is enhanced in
the Cayenne, Cayenne S and
Cayenne GTS by a two-stage
intake manifold. This combines all
the benefits of a long intake tube
(higher torque at low rpm) with
those of a shorter length (more
power at higher rpm). On theCayenne GTS, performance is
enhanced by optimised airflow
management in the intake manifold.
Although ‘naturally aspirated’,
the Cayenne, Cayenne S and
Cayenne GTS provide high torque
ratings across the entire engine
speed range.
Drive
Pressure is often the key to performance.
Turbocharging system in the Cayenne Turbo.
The Porsche Turbo is synonymous
with performance, exhilarating
acoustics and the finest engineering.
The Cayenne Turbo has twin
turbocharger units arranged in
parallel. The low-volume intake
pipes combine with short exhaust
manifolds to achieve a rapid,
emphatic response.
Incoming air is passed through a
filter and compressed by the turbine
units. Its temperature is then
reduced in the intercooler system,
which improves cylinder charging
and limits thermal loads on the
engine.
Boost pressure reaches 1.8 bar
(absolute pressure) under full
acceleration from just 2,500 rpm.In normal road driving (part-throttle
mode), the pre-throttle boost
pressure is reduced in order
to
maximise fuel economy. When
the car is driven more assertively,
the
turbines are ‘pre-spun’ so
as to increase the pressure
available. When the throttle is
finally opened, the boost can
be applied immediately.
Both turbo units are cooled by
dedicated circuits from the main
engine cooling system.This solutionprevents oil degradation due to
overheating.
For the driver, the result is
seamless delivery of phenomenal
power and torque.
· 55 · · 54 ·

· 58 · · 57 · · 56 ·
Used to regulate /control Input data Used to regulate /control
Engine management system
(MED 9.1)
Engine load
Throttle-valve angle
Oxygen sensor signals
Engine speed (from crankshaft)
Inlet camshaft phase angle
Knock sensor signals
Vehicle speed
Air-conditioning settings
Throttle pedal position
Temperatures
– Coolant
– Intake air
– Engine oil
– Ambient air
Zündung
Direct fuel injection (DFI)
Idling via throttle valve and ignition
Heating elements in oxygen sensors
Demand-controlled fuel pump
Fuel-tank venting
CAN interface to PSM control unit, transmission control unit, engine immobiliser, instrument cluster,
air-conditioning control unit, ‘Sport’ button, on-board diagnostics, etc.
Input data
Camshaft phase angle
Engine fan
Starter
Fuel pressure
Throttle valve
Intake manifold resonance valve
Engine management functions in the Cayenne S, Cayenne GTS and Cayenne Turbo. Engine management functions in the Cayenne.
Drive
Maximum freedom requires total control.
Electronic engine management.
The electronic engine management
system provides coordinated
regulation of all engine functions
and associated systems in all
operating conditions.
The basic principle of engine
management is simple. Throughout
each journey, the system monitors
a range of input data and compares
it with corresponding sets of
reference values (‘maps’). Key
engine functions, such as ignition
and fuel injection, can be seamlessly
and automatically adjusted. The
results: optimum fuel economy and
lower emissions as well as greater
power and torque.One of the most important systems
controlled by engine management
is the electronic throttle, a
prerequisitefor Porsche Stability
Management
(PSM). Other major
functions include on-board diagnos-
tics and cylinder-specific knock
control featuring automatic compen-
sation for changes in fuel quality.
On the Cayenne, Cayenne S
and Cayenne GTS, the engine
management system controls
the variable-tract intake manifold.
On the Cayenne Turbo, it regulates
the turbo boost pressure.
Fuel pressure
Oil pressure
Engine management system
(EMS SDI 4.1)
Throttle-valve angle
Oxygen sensor signals
Engine speed (from crankshaft)
Inlet camshaft phase angle
Knock sensor signals
Vehicle speed
Air-conditioning settings
Throttle pedal position
Temperatures
– Coolant
– Intake air
– Engine oil
– Ambient air
Ignition
Direct fuel injection (DFI)
Idling via throttle valve and ignition
Heating elements in oxygen sensors
Demand-controlled fuel pump
Fuel-tank venting
CAN interface to PSM control unit, transmission control unit, engine immobiliser, instrument cluster,
air-conditioning control unit, ‘Sport’ button, on-board diagnostics, etc.
Valve lift (VarioCam Plus)
Engine fan
Starter
Fuel pressure
Throttle valve
Intake manifold resonance valve
(Cayenne S/Cayenne GTS)
Fuel pressure
Oil pressure
Wastegate frequency valve
(Cayenne Turbo only)
Bypass valves (Cayenne Turbo only)
Camshaft phase angle
Oil pressure
Engine load
Ignition
Cylinder-specific knock control
Cylinder-specific knock control

Drive
Applying power with intelligence.
Porsche Traction Management (PTM).
If one wheel loses traction, PTM
utilises the ABD function to apply
the corresponding brake. As a
result, more drive is automatically
transferred to the opposite wheel.
If both wheels on one axle lose
traction, ASR modifies engine output
to maintain drive.
All PTM functions are fully automatic.
All you have to do is choose high-
range mode for road and track or
low-range mode for greater off-road
traction. These are selected using
a single control on the centre
console. In low-range mode, the
gearing is reduced to enhance
off-road manoeuvrability or to
increase road traction when towing
heavy loads.
be automatically varied to match
changing driving conditions. For
the toughest off-road terrain, the
differential can be locked via the
PTM control on the centre console.
Other major features in PTM include
a two-speed transfer gearbox (with
low-range gearing for off-road use),
an automatic brake differential
(ABD) and anti-slip regulation (ASR).
Combining a range of systems
and functions, Porsche Traction
Management (PTM) actively
distributes engine torque precisely
where it’s needed most.
At the heart of PTM is a permanent
all-wheel drive system with electron-
ically variable centre differential.
The standard torque split of 38 %
to the front and 62 % to the rear canCombined, they enable exceptional
performance and vehicle control in
normal road driving or off-road
terrain.
PTM uses the ABD and ASR
functions to achieve dynamic
handling and increased traction.
All-wheel drive Two-stage transfer gearbox
· 67 · · 66 ·

Chassis
Active damping adjustment for optimum performance and comfort.
Porsche Active Suspension Management (PASM).
Both systems are optional on
the Cayenne and Cayenne S. The
Cayenne GTS has an exclusive
combination of PASM and high-
performance steel-sprung suspen-
sion (ride height lowered by 24 mm).
During performance driving or
heavy off-road use, there is a
greater tendency for the body
to roll. PASM prevents this from
happening, thereby improving
stability and occupant comfort.
PASM has three setup modes:
‘Comfort’, ‘Normal’ and ‘Sport’.
In all three cases, the system
uses a series of sensors to
monitor the movement of the
body, e.g., under acceleration and
braking or on poor road surfaces.
It also gathers data on lateral
acceleration, steering angle, brake
pressure and engine torque. The
PASM control unit then evaluates
this information and modifies the
damping forces in accordance
with the selected mode.
PASM remains active at
all times, adapting to the
changing conditions.
If the road surface deteriorates
while travelling in ‘Sport’ mode,
for instance, the system
immediately changes to a softer
rating, thereby improving road
contact. When the road surface
improves, PASM automatically
reverts to the original, harder
rating. This not only increases
stability and safety, it also
enhances comfort.
PASM is an electronic damping
control system. It offers continuous
adjustment of individual damping
forces based on current road
conditions and driving style. PASM
is standard on the Cayenne Turbo
in conjunction with air suspension.
· 77 · · 76 ·PASM control with ‘Comfort’, ’Normal’ and ‘Sport’ options

Off road
Applying power with sensitivity, protecting with strength.
Off-road Technology package.
The rear differential enables
optimum distribution of engine
torque in difficult off-road terrain.
A fully automated part of the
all-wheel system, its primary
function is to optimise traction.
If one of the rear wheels begins
to lose grip, the differential varies
the torque transmitted through
each drive shaft, thereby restoring
traction. Available as a factory-fitted
option on all Cayenne models, the
Off-road Technology package*
incorporates an electronically
variable and lockable rear
differential as part of the standard
all-wheel drive system. Other
features include high-strength
rock-rails with integrated skid
plates, a reinforced engine-bay
guard, enhanced protection for
the fuel tank and rear axle, and
a second towing lug.In low-range mode, the rear
differential can be manually
locked using the main off-road
control on the centre console.
In this state, both rear wheels
receive the same amount of
torque.
For additional off-road protection,
optional wheel-arch extensions
(black finish) and running boards*
with integrated skid plates are
available.
* Not available for the Cayenne GTS.
· 89 · · 88 ·

· 183 · · 182 ·
Technical data
Technical data
Cayenne Cayenne S
Engine
Cylinders68
Displacement3,598 cm34,806 cm3
Max. power (DIN)213 kW (290 hp) 283 kW (385 hp)
at6,200 rpm 6,200 rpm
Max. torque385 Nm 500 Nm
at3,000 rpm 3,500 rpm
Compression ratio12.3 :1 12.5 :1
Transmission
LayoutAll-wheel drive All-wheel drive
6-speed manual gearboxStandard Standard
6-speed Tiptronic SOptional Optional
Low-range ratio2.7:1 2.7:1
Cayenne GTS Cayenne Turbo
88
4,806 cm34,806 cm3
298 kW (405 hp) 368 kW (500 hp)
6,500 rpm 6,000 rpm
500 Nm 700 Nm
3,500 rpm 2,250 – 4,500 rpm
12.5 :1 10.5 :1
All-wheel drive All-wheel drive
Standard –
Optional Standard
2.7:1 2.7:1