air condition PORSCHE CAYNNE 2014 2.G Information Manual
[x] Cancel search | Manufacturer: PORSCHE, Model Year: 2014, Model line: CAYENNE, Model: PORSCHE CAYENNE 2014 2.GPages: 61, PDF Size: 12.53 MB
Page 24 of 61
3 2
1
F E
D C B A
1.1 1.2
46 ·
A strong character is not so easily swayed.
Chassis systems.
Steel-spring suspension.1)
The steel-spring suspension meets
high-level requirements in terms of
performance, driving pleasure and
off-road capability. Consistent lightweight
construction ensures improved driving
dynamics, greater fuel economy
and enhanced comfort. In addition, the
suspension setup has been further
optimised to deliver a clear result: greater
comfort and sports performance.
Typically Porsche.
Air suspension with Porsche Active
Suspension Management (PASM).
2)
A constant vehicle position thanks to air
suspension including self-levelling and ride-height
control with PASM. The ground
clearance can be adjusted using the
rocker switch on the centre console. And
to make it easier to load the car, you can
also select Loading Level using a button
in the luggage compartment.
PASM is an electronic damping control
system that actively and continuously
adjusts the damping force on each wheel,
based on road conditions and driving
style. By means of a button on the centre
console, you can select one of three
modes: Comfort, SPORT or SPORT PLUS.
Sensors record the body movements that
accompany powerful acceleration, braking
and rapid cornering on uneven road surfaces.
The control unit evaluates the
driving conditions and modifies the
damping force on each wheel in accord -
ance with the selected mode. The result
is threefold: increased driving stability,
more comfort and improved performance.
Porsche Dynamic Chassis Control
(PDCC).
PDCC is an active anti-roll system that
anticipates and reduces lateral body
movement when cornering. In addition, it
minimises lateral sway of the vehicle on
rippled road surfaces.
Porsche Torque Vectoring Plus
(PTV Plus).
PT V Plus is a system for enhancing
driving dynamics and stability. Operating
in conjunction with an electronically
controlled rear differential lock, it works
by varying the torque distribution to the
rear wheels. Depending on the steering
angle and steering speed, accelerator
pedal position, yaw rate and vehicle
speed, PT V Plus optimises steering
response and precision by selectively
applying brake pressure to the left or
right rear wheel.
1
Porsche Dynamic Chassis Control (PDCC)
1.1 High -speed cornering without PDCC
1.2 High -speed cornering with PDCC
2 Air suspension ride heights3
Porsche Torque Vectoring Plus (PT V Plus) Schematic
representation:
A High Level II: max. ground clearance 268 mm,
selectable at speeds of up to 18 mph.
3)B High Level I: max. ground clearance 238 mm,
selectable at speeds of up to 49 mph.3)C Normal Level: max. ground clearance 210 mm.3)D Low Level I: max. ground clearance 188 mm,
automatically selected above 85 mph.3)E Low Level II: max. ground clearance 178 mm,
automatically selected above 130 mph.
(Not manually selectable.)
3)F Loading Level: max. ground clearance 158 mm,
only selectable when vehicle is stationar y.3)
1)
Standard on the Cayenne Diesel, Cayenne S, Cayenne S Diesel and Cayenne S E- Hybrid.2) Standard on the Cayenne Turbo.3) The ride height on the Cayenne Turbo is 5 mm higher than on the other models. Chassis systems
|
Drive and chassis