battery Ram 3500 Chassis Cab 2017 Workshop Manual

Interior..................... .132, 133, 134, 164
Low Fuel ............................. .214
Malfunction Indicator (Check Engine) ..........208
Park ................................. .219
Passing ............................... .136
Seat Belt Reminder ...................... .201
Security Alarm ......................... .203
Service ............................ .500, 501
Tire Pressure Monitoring (TPMS) ..........212, 395
Traction Control ........................ .366
Transfer Case .......................... .345
Turn Signal ....................96, 135, 220, 501
Warning (Instrument Cluster Description) . . . .204, 220
Limited-Slip Differential ..................350, 483
Loading Vehicle ........................... .407
Tires................................. .376
Load Shed Battery Saver Mode ...................... .237
Battery Saver On ........................ .237
Electrical Load Reduction ...................237
Intelligent Battery Sensor ...................237
Locks ....................................31
Automatic Door ..........................32
Child Protection ..........................33 Door
..................................31
Power Door .............................32
Low Tire Pressure System .....................395
Lubrication, Body ......................... .471
Lug Nuts ......................... .431, 437, 439
Maintenance Free Battery .....................463
Maintenance Procedures ..................... .457
Maintenance Schedule ...................... .512
Malfunction Indicator Light (Check Engine) . . . .208, 455
Manual, Service ........................... .522
Manual Transmission Fluid Level Check ....................... .484
Memory Seat ............................. .121
Methanol ............................... .403
Mirr

ors ................................. .101
Electric Powered ........................ .108
Heated ............................... .109
Memory .............................. .121
Outside .............................. .107
Rearview .......................... .101, 106
Trailer Towing ...........................111
Modifications/Alterations, Vehicle ................7
Monitor, Tire Pressure System ..................395
10
INDEX 531

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENTSpecial design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.