Ram 5500 Chassis Cab 2011 Service Manual

Ram 5500 Chassis Cab 2011 Service Manual 5500 Chassis Cab 2011 Ram Ram https://www.carmanualsonline.info/img/34/12630/w960_12630-0.png Ram 5500 Chassis Cab 2011 Service Manual
Trending: headlamp, oil temperature, tow bar, ESP, change time, remote control, drain bolt

Page 41 of 476

Ram 5500 Chassis Cab 2011 Service Manual Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and
adjust the seat.
2. The seat belt latch plate is above the back of the front
seat, next to your arm in th

Page 42 of 476

Ram 5500 Chassis Cab 2011 Service Manual 3. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a “click.”WARNING!
•A belt buckled into the wrong buckle will not
protect you properly. The lap port

Page 43 of 476

Ram 5500 Chassis Cab 2011 Service Manual WARNING! (Continued)
•A shoulder belt placed behind you will not protect
you from injury during a collision. You are more
likely to hit your head in a collision if you do not
wear your shoulder belt

Page 44 of 476

Ram 5500 Chassis Cab 2011 Service Manual WARNING!
•A lap belt worn too high can increase the risk of
internal injury in a collision. The belt forces won’t be
at the strong hip and pelvic bones, but across your
abdomen. Always wear the la

Page 45 of 476

Ram 5500 Chassis Cab 2011 Service Manual belt tongue is pressed into the buckle. Allow the retractor
to take up the surplus webbing, and the buckles will
hang vertically from the cab back exit bezel, thus freeing
up all the area behind the f

Page 46 of 476

Ram 5500 Chassis Cab 2011 Service Manual Inserting Latch PlateIn Use Position
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45

Page 47 of 476

Ram 5500 Chassis Cab 2011 Service Manual WARNING!
•If the black latch and black buckle are not prop-
erly connected when the seat belt is used by an
occupant, the seat belt will not be able to provide
proper restraint and will increase the

Page 48 of 476

Ram 5500 Chassis Cab 2011 Service Manual you will prefer a higher position. When you release the
anchorage, try to move it up or down to make sure that
it is locked in position.
Center Lap Belts
The center seating position for the Crew Cab f

Page 49 of 476

Ram 5500 Chassis Cab 2011 Service Manual How To Use The Automatic Locking Mode
1. Buckle the combination lap/shoulder belt.
2. Grasp the shoulder portion and pull downward until
the entire belt is extracted.
3. Allow the belt to retract. As

Page 50 of 476

Ram 5500 Chassis Cab 2011 Service Manual 2. Turn the ignition switch to the ON position and wait
for the Seat Belt Reminder Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle
and then re-buckle the driver’s seat belt
Trending: oil dipstick, Trailer wiring, service, oil reset, auxiliary battery, gas type, tire pressure reset