fuel cap Ram C/V 2013 User Guide

•Tighten the fuel filler cap until you hear a “clicking”
sound. This is an indication that the fuel filler cap is
properly tightened.
• If the gas cap is not tightened properly, the MIL may
come on. Be sure the gas cap is tightened every time
the vehicle is refueled.
Loose Fuel Filler Cap Message
If the vehicle diagnostic system determines that the fuel
filler cap is loose, improperly installed, or damaged, a
“gASCAP” message will display in the odometer or a
“CHECK GASCAP” message will be displayed in the
Electronic Vehicle Information Center (EVIC). Refer to
“Electronic Vehicle Information Center” in “Understand-
ing Your Instrument Panel” for further information.
Tighten the fuel filler cap until a “clicking” sound is
heard. This is an indication that the fuel filler cap is properly tightened. Refer to “Onboard Diagnostic Sys-
tem” in “Maintaining Your Vehicle” for further informa-
tion.
If the problem continues, the message will appear the
next time the vehicle is started. See your authorized
dealer as soon as possible.
VEHICLE LOADING
As required by National Highway Traffic Safety Admin-
istration regulations, your vehicle has a certification label
affixed to the driver’s side door or B-Pillar.
If seats are removed for carrying cargo, do not exceed the
specified GVWR and GAWR.
Vehicle Certification Label
Your vehicle has a Vehicle Certification Label affixed to
the drivers side “B” Pillar or the rear of the driver ’s door.
548 STARTING AND OPERATING

Rim Size
This is the rim size that is appropriate for the tire size
listed.
Inflation Pressure
This is the cold tire inflation pressure for your vehicle for
all loading conditions up to full GAWR.
Curb Weight
The curb weight of a vehicle is defined as the total weight
of the vehicle with all fluids, including vehicle fuel, at full
capacity conditions, and with no occupants or cargo
loaded into the vehicle. The front and rear curb weight
values are determined by weighing your vehicle on a
commercial scale before any occupants or cargo are
added.
Overloading
The load carrying components (axle, springs, tires,
wheels, etc.) of your vehicle will provide satisfactory
service as long as you do not exceed the GVWR and the
front and rear GAWR.
The best way to figure out the total weight of your
vehicle is to weigh it when it is fully loaded and ready for
operation. Weigh it on a commercial scale to ensure that
it is not over the GVWR.
Figure out the weight on the front and rear of the vehicle
separately. It is important that you distribute the load
evenly over the front and rear axles.
Overloading can cause potential safety hazards and
shorten useful service life. Heavier axles or suspension
components do not necessarily increase the vehicle’s
GVWR.
550 STARTING AND OPERATING

MAINTAINING YOUR VEHICLE
CONTENTS
ENGINE COMPARTMENT — 3.6L ..........605
 ONBOARD
DIAGNOSTIC SYSTEM — OBD II . . .606
▫Loose Fuel Filler Cap Message ............607
 EMISSIONS INSPECTION AND
MAINTENANCE PROGRAMS .............607
 REPLACEMENT PARTS ..................609
 DEALER SERVICE ..................... .609
 MAINTENANCE PROCEDURES ...........610
▫ Engine Oil ......................... .610
▫ Engine Oil Filter ..................... .613▫
Engine Air Cleaner Filter ................614
▫ Exhaust System ..................... .614
▫ Maintenance-Free Battery ...............616
▫ Air Conditioner Maintenance .............618
▫ Body Lubrication .....................621
▫ Windshield Wiper Blades ...............621
▫ Cooling System ..................... .623
▫ Brake System ....................... .629
▫ Automatic Transmission ................631
7

Loose Fuel Filler Cap Message
If the vehicle diagnostic system determines that the fuel
filler cap is loose, improperly installed, or damaged, a
“gASCAP” message will display in the odometer or a
“CHECK GASCAP” message will be displayed in the
Electronic Vehicle Information Center (EVIC). Refer to
“Electronic Vehicle Information Center (EVIC)” in ”Un-
derstanding Your Instrument Panel” for further informa-
tion. Tighten the gas cap until aclickingsound is heard.
This is an indication that the gas cap is properly tight-
ened.
Press the odometer reset button to turn the message off.
If the problem persists, the message will appear the next
time the vehicle is started. This might indicate a damaged
cap. If the problem is detected twice in a row, the system
will turn on the MIL. Resolving the problem will turn the
MIL light off.
EMISSIONS INSPECTION AND MAINTENANCE
PROGRAMS
In some localities, it may be a legal requirement to pass
an inspection of your vehicle’s emissions control system.
Failure to pass could prevent vehicle registration.
For states that require an Inspection and Mainte-
nance (I/M), this check verifies the “Malfunction
Indicator Light (MIL)” is functioning and is not
on when the engine is running, and that the OBD II
system is ready for testing.
Normally, the OBD II system will be ready. The OBD II
system may notbe ready if your vehicle was recently
serviced, recently had a dead battery or a battery replace-
ment. If the OBD II system should be determined not
ready for the I/M test, your vehicle may fail the test.
7
MAINTAINING YOUR VEHICLE 607

American Petroleum Institute (API) Engine Oil
Identification Symbol
This symbol means that the oil has
been certified by the American
Petroleum Institute (API). The
manufacturer only recommends
API Certified engine oils.
CAUTION!
Do not use chemical flushes in your engine oil as the
chemicals can damage your engine. Such damage is
not covered by the New Vehicle Limited Warranty.
Engine Oil Viscosity – 3.6L Engine
SAE 5W-20 engine oil is recommended for all operating
temperatures. This engine oil improves low temperature
starting and vehicle fuel economy.
The engine oil filler cap also shows the recommended
engine oil viscosity for your engine. For information on
engine oil filler cap location, refer to the “Engine Com-
partment” illustration in this section.
NOTE:SAE 5W-30 engine oil approved to Fiat 9.55535-S1
or Fiat 9.55535-S3 may be used when SAE 5W-20 engine
oil meeting MS- 6395 is not available.
Synthetic Engine Oils
You may use synthetic engine oils provided the recom-
mended oil quality requirements are met, and the recom-
mended maintenance intervals for oil and filter changes
are followed.
612 MAINTAINING YOUR VEHICLE

FLUID CAPACITIES
U.S.Metric
Fuel (Approximate) 20 Gallons76 Liters
Engine Oil with Filter
3.6L Engine (SAE 5W-20, API Certi-
fied) 6 Quarts
5.6 Liters
Cooling System *
3.6L Engine (MOPAR® Antifreeze/
Engine Coolant 10 Year/150,000
Mile Formula or equivalent) 13.4 Quarts
12.6 Liters
* Includes heater and coolant recovery bottle filled to MAX level. Add 2.9 Qts (2.8 L) if equipped with a rear
heater.
7
MAINTAINING YOUR VEHICLE 655

FLUIDS, LUBRICANTS AND GENUINE PARTS
Engine
ComponentFluid, Lubricant, or Genuine Part
Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant
10 Year/150,000 Mile Formula OAT (Organic Additive
Technology) meeting the requirements of Chrysler Ma-
terial Standard MS-12106.
Engine Oil We recommend you use API Certified SAE 5W-20
Engine Oil, meeting the requirements of Chrysler Ma-
terial Standard MS-6395. Refer to your oil filler cap for
correct SAE grade.
Engine Oil Filter We recommend you use MOPAR® Engine Oil Filters.
Spark Plugs We recommend you use MOPAR® Spark Plugs (Gap
0.043 in [1.1 mm]).
Fuel Selection 87 Octane
656 MAINTAINING YOUR VEHICLE

Automatic Transmission....................468
Adding Fluid ......................... .633
Fluid and Filter Changes ..................633
Fluid Change ......................... .633
Fluid Level Check ...................... .633
Fluid Type ........................... .631
Gear Ranges .......................... .473
Special Additives ...................... .632
Torque Converter ...................... .481
Auto Up Power Windows ....................42
Battery ................................ .616
Jump Starting ......................... .592
Keyless Transmitter Replacement (RKE) ........28
Saving Feature (Protection) ................227
Belts, Seat ...............................119
Blind Spot Monitoring ..................... .136
Body Builders Guide ........................6
Body Mechanism Lubrication .................621B-Pillar Location
......................... .510
Brake Assist System ...................... .493
Brake Control System, Electronic ..............492
Brake Fluid ............................ .657
Brake System ........................... .629
Fluid Check .......................... .630
Parking ............................. .487
Warning Light ........................ .324
Brake/Transmission Interlock .................471
Bulb Replacement ........................ .651
Bulbs, Light ............................ .122
Calibration, Compass ..................... .345
Camera, Rear ........................... .249
Capacities, Fluid ......................... .655
Caps, Filler Fuel ................................ .546
Power Steering ........................ .486
Radiator (Coolant Pressure) ................626
10
INDEX 679

Coolant Pressure Cap (Radiator Cap)...........626
Cooling System .......................... .623
Adding Coolant (Antifreeze) ...............625
Coolant Capacity ...................... .655
Coolant Level ......................... .623
Disposal of Used Coolant .................627
Drain, Flush, and Refill ...................624
Inspection ........................... .627
Points to Remember .....................628
Pressure Cap ......................... .626
Radiator Cap ......................... .626
Selection of Coolant (Antifreeze) .............624
Corrosion Protection ...................... .633
Cupholders ............................ .275
Customer Assistance ...................... .669
Data Recorder, Event .......................90
Daytime Running Lights ....................223 Dealer Service
........................... .609
Defroster, Windshield ..................... .120
Delay (Intermittent) Wipers ..................229
Diagnostic System, Onboard .................606
Dimmer Control ......................... .224
Dipsticks Automatic Transmission ..................633
Oil (Engine) .......................... .610
Power Steering ........................ .486
Disabled Vehicle Towing ....................599
Disposal Antifreeze (Engine Coolant) ................627
Door Locks ..............................35
Door Opener, Garage ...................... .256
Driving Through Flowing, Rising, or Shallow Standing
Water ............................... .483
Driving to Achieve Maximum Fuel Economy ......340
10
INDEX 681

Enhanced Accident Response Feature............86
Entry System, Illuminated ....................20
Ethanol ............................... .538
Event Data Recorder ........................90
Exhaust Gas Caution ........................55
Exhaust System ...........................118
Exterior Lights .......................... .122
Fabric Care ............................. .637
Filler Location Fuel ....................... .323
Filters Air Cleaner .......................... .614
Air Conditioning ...................... .459
Engine Oil ........................... .613
Engine Oil Disposal .....................613
Flashers Hazard Warning ....................... .570Turn Signal
.......................... .122
Flash-To-Pass ........................... .227
Flexible Fuel Vehicles Cruising Range ........................ .545
Engine Oil ........................... .545
Fuel Requirements ..................... .542
Maintenance .......................... .546
Replacement Parts ...................... .546
Starting ............................. .545
Flooded Engine Starting ....................466
Floor Console ........................... .286
Fluid Capacities ......................... .655
Fluid Leaks ............................ .122
Fluid Level Checks Automatic Transmission ..................633
Brake ............................... .630
Cooling System ........................ .623
10
INDEX 683