service indicator RAM CHASSIS CAB 2016 User Guide

access this information to assist with the diagnosis and
service of your vehicle and emissions system.
WARNING!• ONLY an authorized service technician should con-
nect equipment to the OBD II connection port in
order to diagnose or service your vehicle.
• If unauthorized equipment is connected to the
OBD II connection port, such as a driver-behavior
tracking device, it may:
• Be possible that vehicle systems, including
safety related systems, could be impaired or a
loss of vehicle control could occur that may result
in an accident involving serious injury or death.
• Access, or allow others to access, information
stored in your vehicle systems, including per-
sonal information. For further information, refer to “Privacy Practices — If
Equipped With Uconnect 8.4 Radio” and “Uconnect
CyberSecurity” in “All About Uconnect Access” in your
Owner ’s Manual Radio Supplement and “Cybersecurity”
in “Understanding Your Instrument Panel” in your Own-
er ’s Manual on the DVD.
Loose Fuel Filler Cap Message
If the vehicle diagnostic system determines
that the fuel filler cap is loose, improperly
installed, or damaged, a loose gascap indicator
will display in the EVIC/DID telltale display
area. Refer to “Electronic Vehicle Information Center
(EVIC)” or “Driver Information Display (DID)” in “Un-
derstanding Your Instrument Panel” for further informa-
tion. Tighten the fuel filler cap properly and push the 7MAINTAINING YOUR VEHICLE 565

SELECT button to turn off the message. If the problem
continues, the message will appear the next time the
vehicle is started.
A loose, improperly installed, or damaged fuel filler cap
may also turn on the Malfunction Indicator Light (MIL).
EMISSIONS INSPECTION AND MAINTENANCE
PROGRAMS
In some localities, it may be a legal requirement to pass
an inspection of your vehicle’s emissions control system.
Failure to pass could prevent vehicle registration.
For states that require an Inspection and Mainte-
nance (I/M), this check verifies the “Malfunction
Indicator Light (MIL)” is functioning and is not
on when the engine is running, and that the OBD II
system is ready for testing.
Normally, the OBD II system will be ready. The OBD II
system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replace-
ment. If the OBD II system should be determined not
ready for the I/M test, your vehicle may fail the test.
Your vehicle has a simple ignition actuated test, which
you can use prior to going to the test station. To check if
your vehicle’s OBD II system is ready, you must do the
following:
1. Cycle the ignition switch to the ON position, but do
not crank or start the engine.
NOTE: If you crank or start the engine, you will have to
start this test over.
2. As soon as you cycle the ignition switch to the ON
position, you will see the “Malfunction Indicator Light
(MIL)” symbol come on as part of a normal bulb
check.566 MAINTAINING YOUR VEHICLE

MAINTENANCE SCHEDULE
Your vehicle is equipped with an automatic oil change
indicator system. The oil change indicator system will
remind you that it is time to take your vehicle in for
scheduled maintenance.
Based on engine operation conditions, the oil change
indicator message will illuminate. This means that ser-
vice is required for your vehicle. Operating conditions
such as frequent short-trips, trailer tow, extremely hot or
cold ambient temperatures, and E85 fuel usage will
influence when the “Oil Change Required” message is
displayed. Severe Operating Conditions can cause the
change oil message to illuminate as early as 3,500 miles
(5,600 km) since last reset. Have your vehicle serviced as
soon as possible, within the next 500 miles (805 km).
Your authorized dealer will reset the oil change indicator
message after completing the scheduled oil change. If a
scheduled oil change is performed by someone other than your authorized dealer, the message can be reset by
referring to the steps described under “Electronic Vehicle
Information Center (EVIC)/Driver Information Display
(DID)” in “Understanding Your Instrument Panel” for
further information.
Gasoline Engines:
Under no circumstances should oil change intervals
exceed 8,000 miles (13,000 km), twelve months or 350
hours of engine run time, whichever comes first. The 350
hours of engine run or idle time is generally only a
concern for fleet customers.
Severe Duty:
Change Engine Oil at 4,000 miles (6,500 km) if the vehicle
is operated in a dusty and off road environment or is
operated predominately at idle or very low engine
RPM’s. This type of vehicle use is considered Severe Duty632 MAINTENANCE SCHEDULES

Center Mounted Stop ................... .622
Courtesy/Reading ............... .170, 172, 208
Cruise ........................... .266, 267
Daytime Running ...................... .165
Engine Temperature Warning .............. .244
Exterior ............................. .120
Fog ......................... .168, 259, 621
Four-Wheel Drive Indicator ............... .427
Hazard Warning Flasher ................. .536
Headlights ........................... .163
High Beam ........................... .174
High Beam/Low Beam Select .............. .174
Hill Descent Control Indicator ............. .456
Illuminated Entry ........................24
Interior ................... .169, 170, 172, 208
Low Fuel ............................ .257
Malfunction Indicator (Check Engine) ........ .250
Park ............................... .264
Passing ............................. .174 Seat Belt Reminder ..................... .240
Security Alarm ........................ .244
Service .......................... .617, 618
Tire Pressure Monitoring (TPMS) ........ .254, 488
Traction Control ....................... .453
Transfer Case ......................... .427
Turn Signal ................. .120, 173, 265, 619
Warning (Instrument Cluster Description) . . .244, 265
Limited-Slip Differential ................ .434, 596
Loading Vehicle ......................... .504
Tires ............................... .466
Locks ..................................37
Automatic Door .........................39
Child Protection .........................40
Door .................................37
Power Door ............................39
Low Tire Pressure System .................. .488
Lubrication, Body ........................ .58010 INDEX 661

Lug Nuts .................... .537, 538, 545, 547
Maintenance Free Battery ................... .577
Maintenance Procedures ................... .568
Maintenance Schedule ..................... .632
Malfunction Indicator Light (Check Engine) . . .250, 566
Manual, Service ......................... .646
Manual Transmission
Fluid Level Check ...................... .596
Memory Seat ........................... .156
Methanol .............................. .499
Mirrors ............................... .128
Electric Powered ....................... .138
Heated .............................. .140
Memory ............................. .156
Outside ............................. .136
Rearview ..................... .128, 129, 136
Trailer Towing ........................ .141
Modifications/Alterations, Vehicle ...............7 Monitor, Tire Pressure System ............... .488
MOPAR Parts ........................ .567, 645
MTBE/ETBE ........................... .499
Multi-Function Control Lever ................ .173
Navigation System (Uconnect GPS) ............ .205
New Vehicle Break-In Period .................115
Occupant Restraints ........................50
Octane Rating, Gasoline (Fuel) ............... .498
Oil, Engine ......................... .569, 627
Capacity ............................ .626
Change Interval ....................... .570
Dipstick ............................. .569
Disposal ............................. .571
Filter ............................ .572, 627
Filter Disposal ........................ .571
Identification Logo ..................... .570
Pressure Warning Light .................. .246662 INDEX

Traction ............................... .434
Traction Control ......................... .449
Trailer Sway Control (TSC) ................. .455
Trailer Towing .......................... .507
Cooling System Tips .................... .524
Hitches ............................. .512
Minimum Requirements ................. .514
Mirrors ............................. .141
Trailer And Tongue Weight ............... .513
Wiring .............................. .522
Trailer Towing Guide ...................... .513
Trailer Weight ........................... .513
Transfer Case ........................... .596
Electronically Shifted .................... .427
Fluid ............................... .629
Transmission ........................... .596
Automatic ........................ .408, 596
Fluid ............................... .629
Shifting ............................. .405 Transmitter Battery Service (Remote Keyless Entry) . .30
Transmitter Programming (Remote Keyless Entry) . . .25
Transmitter, Remote Keyless Entry (RKE) .........25
Transporting Pets .........................114
Tread Wear Indicators ..................... .480
Turn Signals ..................... .173, 265, 619
Uconnect
Customer Programmable Features ....... .323, 341
Operation ............................ .346
Uconnect Settings ...................... .312
Uconnect Settings ................... .323, 341
Uconnect 8.4A/8.4AN Voice Recognition
Additional Information .................. .396
Do Not Disturb ....................... .394
Siri Eyes Free ......................... .394
Uconnect 8.4 Settings
Customer Programmable Features — Units .... .33210 INDEX 669