MPG RAM CHASSIS CAB 2016 Owners Manual

both tank levels. Fuel transfer is complete once the
Front Fuel Level is greater than the Rear Fuel Level.
Trip A
Push and release the UP or DOWN arrow button
until the Trip A menu item is highlighted in the EVIC.
The Trip A information will display the following:
• Distance
• Average MPG
• Elapsed Time
Push and hold RIGHT arrow button to reset all
information.
Trip B
Push and release UP or DOWN arrow button
until the Trip B menu item is highlighted in the EVIC.
The Trip B information will display the following: • Distance
• Average MPG
• Elapsed Time
Push and hold the RIGHT arrow button to reset all
the information.
Trailer Tow Menu Item
Push and release the UP or DOWN arrow button
until the Trailer Tow menu item is highlighted. Push
and release the RIGHT arrow button and the next
screen will display the following trailer trip
information:
• Trip (trailer specific) Distance: Push and hold the
RIGHT arrow button to reset the distance.278 UNDERSTANDING YOUR INSTRUMENT PANEL

The DID displays are located in the center portion of the
cluster and consists of eight sections:
1. Main Screen — The inner ring of the display will
illuminate in grey under normal conditions, yellow for
non critical warnings, red for critical warnings, and
white for on demand information.
2. Audio / Phone Information and Sub-menu Informa-
tion — Whenever there are sub-menus available, the
position within the sub-menus is shown here.
3. Selectable Information (Compass, Temp, Range to
Empty, Trip A, Trip B, Average MPG, Trailer Trip
(distance only), Trailer Brake Gain, Time)
4. Telltales/Indicators
5. Gear Selector Status (PRNDL)
6. Selectable Menu Icons
7. 4WD Status 8. Selectable Gauge 2 (Trans Temp, Oil Temp, Oil Life,
Trailer Brake, Current MPG)
9. Selectable Gauge 1 (Trans Temp, Oil Temp, Oil Life,
Trailer Brake, Current MPG)
The main display area will normally display the main
menu or the screens of a selected feature of the main
menu. The main display area also displays “pop up”
messages that consist of approximately 60 possible warn-
ing or information messages. These pop up messages fall
into several categories:
• Five Second Stored Messages
When the appropriate conditions occur, this type of
message takes control of the main display area for five
seconds and then returns to the previous screen. Most of
the messages of this type are then stored (as long as the
condition that activated it remains active) and can be
reviewed from the “Messages” main menu item. As long
as there is a stored message, an “i” will be displayed in 4UNDERSTANDING YOUR INSTRUMENT PANEL 291

Fuel Economy
Push and release the UP or DOWN arrow
button until the Fuel Economy Menu icon/title
is highlighted.
Submenu item:
• Range
• Current MPG or L/100 km
• Average MPG or L/100 km
• To reset the following features (Range, Current MPG
or L/100 km, or Average MPG / L/100 km), push hold
the RIGHT arrow button till features are reset.
• Dual Fuel Tank levels — If Equipped • Push and release the RIGHT
arrow button to
display the Fuel Tank Level submenu item. Your
DID will display the fuel levels of the Front and
Rear fuel tanks.
• The fuel is automatically transferred from the Rear
tank to the Front tank based on both tank levels. Fuel
transfer is complete once the Front Fuel Level is
greater than the Rear Fuel Level.
Trip A
Push and release the UP or DOWN ar-
row button until the Trip A icon/title is
highlighted in the DID. The Trip A informa-
tion will display the following:
• Distance MI or km
• Average MPG or L/100 km298 UNDERSTANDING YOUR INSTRUMENT PANEL

• Average MPH or km/h
• Elapsed Time
Hold the RIGHT arrow button to reset all the
information.
Trip B
Push and release the UP or DOWN ar-
row button until the Trip B icon/title is
highlighted in the DID. The Trip B informa-
tion will display the following:
• Distance MI or km
• Average MPG or L/100 km
• Average MPH or km/h
• Elapsed Time Hold the RIGHT
arrow button to reset all the
information.
Trailer Tow
Push and release the UP or DOWN ar-
row button until the Trailer Tow icon is
highlighted. Push and release the RIGHT
arrow button and the next screen will
display the following trailer trip information:
• Trailer Trip
• Trailer Brake 4UNDERSTANDING YOUR INSTRUMENT PANEL 299

Settings Options
1 Upper Left • None
• Compass
• Outside Temp.
• Time
• Range to Empty
• Average MPG (not available for CNG
models)
• Current MPG (not available for CNG
models)
• Trip A
• Trip B
• Trailer Trip
• Trailer Brake Gain
2 Upper Right • None
• Compass
• Outside Temp. (Default)
• Time 4UNDERSTANDING YOUR INSTRUMENT PANEL 301

Settings Options
• Range to Empty
• Average MPG (not available for CNG
models)
• Current MPG (not available for CNG
models)
• Trip A
• Trip B
• Trailer Trip
• Trailer Brake Gain
3 Lower Left • None (Default)
• Compass
• Outside Temp.
• Time
• Range to Empty
• Average MPG (not available for CNG
models)302 UNDERSTANDING YOUR INSTRUMENT PANEL

Settings Options
• Current MPG (not available for CNG
models)
• Trailer Brake Gain
4 Lower Right • None (Default)
• Compass
• Outside Temp.
• Time
• Range to Empty
• Average MPG (not available for CNG
models)
• Current MPG (not available for CNG
models)
• Trailer Brake Gain
5 Upper Gauge • None (Default)
• Trans Temp.
• Oil Temp.
• Oil Life 4UNDERSTANDING YOUR INSTRUMENT PANEL 303

Settings Options
• Current MPG (not available for CNG
models)
• Trailer Brake Gain
6 Lower Gauge • None (Default)
• Trans Temp.
• Oil Temp.
• Oil Life
• Current MPG (not available for CNG
models)
• Trailer Brake Gain
7 Odometer • 000
• 000.0
8 Restore Defaults • Cancel
• OK304 UNDERSTANDING YOUR INSTRUMENT PANEL

Units
After pressing the “Units” button on the touchscreen you
may select each unit of measure independently displayed
in the Driver Information Display (DID), and navigation
system (if equipped). The following selectable units of
measure are listed below:
• Speed
Select from: “MPH” or “km/h.”
• Distance
Select from: “mi” or “km.”
• Fuel Consumption
Select from: “MPG” (US), “MPG” (UK), “L/100 km” or
“km/L.”
• Capacity
Select from: “gal” (US), “gal” (UK), “L/100 km” or “L.” • Pressure
Select from: “psi,” “kPa,” or “bar.”
• Temperature
Select from: “°C,” or “°F.”
• Power
Select from: “HP” (US), “HP” (UK), and “kW.”
• Torque
Select from: “lb-ft” or “Nm.”
Voice
After pressing the “Voice” button on the touchscreen the
following settings will be available:
• Voice Response Length
When in this display, you may change the Voice Re-
sponse Length settings. To change the Voice Response316 UNDERSTANDING YOUR INSTRUMENT PANEL

• Controls Screen Time-Out — If Equipped
When this feature is selected, the Controls Screen will
stay open for five seconds before the screen times out.
With the feature deselected, the screen will stay open
until it is manually closed. Press the “Controls Screen
Time-Out” button on the touchscreen, until a check-mark
appears next to the setting, showing that setting has been
selected.
• Fuel Saver Display — If Equipped
This feature will allow you to enable fuel saver mode and
will be displayed in the DID. Press the “Fuel Saver
Display” button on the touchscreen, until a check-mark
appears next to the setting, showing that setting has been
selected.
Units
After pressing the “Units” button on the touchscreen you
may select each unit of measure independently displayed in the Driver Information Display (DID), and navigation
system (if equipped). The following selectable units of
measure are listed below:
• Speed
Select from: “MPH” or “km/h.”
• Distance
Select from: “mi” or “km.”
• Fuel Consumption
Select from: “MPG” (US), “MPG” (UK), “L/100 km” or
“km/L.”
• Capacity
Select from: “gal” (US), “gal” (UK), “L/100 km” or “L.”
• Pressure
Select from: “psi,” “kPa,” or “bar.”332 UNDERSTANDING YOUR INSTRUMENT PANEL