NOTE:
Setting is possible between 20 and 120 MPH
(30 and 195 km/h), according to the previously
set unit. The setting will increase/decrease by
5 units each time theup or down arrow button is
pushed. Hold down either up or down arrow button
to automatically increase/decrease the setting
rapidly. Complete the adjustment with single
pushes of the button when you approach the de-
sired value.
•
Push the MODE button briefly to return to the
menu screen or hold the button down to return
to the standard screen without storing.
To cancel the setting, proceed as follows:
• Briefly push the MODE button, (On) will flash on the display
• Push the downarrow button, (Off) will flash
on the display
•
Push the MODE button briefly to return to the
menu screen or hold the button down to return
to the standard screen without storing.
For further information, and applicable warn-
ings and cautions, please refer to the Owner’s
Manual at www.mopar.com/en-us/care/
owners-manual.html (U.S. Residents) or
www.owners.mopar.ca (Canadian Residents).
Electric Park Brake (EPB) —
Diesel Only
Your vehicle is equipped with an Electric Park
Brake System (EPB) that offers simple opera-
tion, and some additional features that make
the park brake more convenient and useful.
The park brake is primarily intended to prevent
the vehicle from rolling while parked. Before
leaving the vehicle, make sure that the park
brake is applied.
You can engage the park brake in two ways:
• Manually, by applying the park brake switch.
• Automatically, by the Auto Park Brake fea- ture whenever the vehicle speed is below
1.25 mph (2 km/h) and the ignition switch is
in the STOP/OFF position.
The park brake switch is located on the instru-
ment panel to the right of the instrument clus-
ter.
STARTING AND OPERATING
