steering Ram ProMaster 2018 Quick Reference Guide

Instrument Cluster Display
Controls
The instrument cluster display features a driver
interactive display that is located in the instru-
ment cluster. Pushing the controls on the left
side of the steering column allows the driver to
select vehicle information and Personal Set-
tings.• Push the
uparrow button to scroll upward
through the main menus (Menu, Outside
Temperature Display, Trip Functions, Date,
Time) and sub menus.
• Push the downarrow button to scroll down-
ward through the main menus and sub
menus.
• Push the MODEbutton for access to main
menus, sub menus or to select a personal
setting in the setup menu. Push and hold the
MODE button for two seconds to reset fea-
tures.
• Push and hold the MODEbutton for two
seconds to reset displayed/selected features
that can be reset.
For further information, and applicable warn-
ings and cautions, please refer to the Owner’s
Manual at www.mopar.com/en-us/care/
owners-manual.html (U.S. Residents) or
www.owners.mopar.ca (Canadian Residents).
Speed Beep
This function makes it possible to set the ve-
hicle speed limit (MPH or km/h). When this
limit is exceeded the driver is immediately
alerted.
To set the desired speed limit, proceed as
follows:
• Briefly press the MODE button: the display will show the wording (Speed Beep)
• Push button or to select speed limit activa- tion (On) or deactivation (Off)
• If the function has been activated (On), push the upordown arrow buttons to select the
desired speed limit and then push MODE to
confirm.
Instrument Cluster Display Controls
INSTRUMENT CLUSTER
DISPLAY