fuse Ram ProMaster City 2017 User Guide

CavityMini Fuse Description
F43 15 Amp BlueBi-Directional Washer Pump
F48 20 Amp YellowPassenger Power Windows
F50 7.5 Amp BrownKL 15 (+15) - Air-Bag
F51 7.5 Amp BrownKL 15 (+15) - External Mirror Adjust-
ment Command, HVAC, RVC, HWB
Coils
F37 5 Amp BeigeKL 15 (+15) - Brake Pedal Switch
(N.O.), IPC, Brake Pedal Switch
(N.C.)
F49 5 Amp BeigeKL 15 (+15) - PAM, CSS Lighting,
ECM Backlighting, TTM
F31 5 Amp BeigeKL 15a (INT A) - HWB, MCO
F47 20 Amp YellowDriver Power Windows
7
MAINTAINING YOUR VEHICLE 305

Central Unit Fuse Panel
The central power fuse panel is located on the driver ’s side
under the instrument panel.
CavityMini Fuse Description
F1 10 Amp Red Front Heated Seat Passenger
F2 10 Amp Red Front Heated Seat Driver
F3 20 Amp Yellow Rear Power Window Driver side
F4 20 Amp Yellow Rear Power Window Passenger side
F5 15 Amp Blue Fog Lamps
Fuse Panel Cover
Fuse Panel
306 MAINTAINING YOUR VEHICLE

Fog Lights............................ .89, 143
Four-Way Hazard Flasher .....................244
Freeing A Stuck Vehicle ..................... .266
Fuel ................................... .226
Additives ............................. .228
Clean Air ............................. .226
Ethanol .............................. .226
Filler Cap (Gas Cap) ..................... .229
Gasoline .............................. .226
Light ................................ .137
Materials Added ........................ .228
Methanol ............................. .226
Octane Rating ....................... .226, 314
Requirements .......................... .226
Specifications .......................... .314
Tank Capacity .......................... .313
Fuses .................................. .300
Gas Cap (Fuel Filler Cap) .................229, 277
Gasoline, Clean Air ........................ .226
Gasoline (Fuel) ........................... .226
Gasoline, Reformulated ..................... .226
Gear Ranges ............................. .183
Gear Select Lever Override ....................269
General Information .....................161, 225 Glass Cleaning
........................... .299
Gross Axle Weight Rating .................231, 233
Gross Vehicle Weight Rating ...............231, 233
Guide, Body Builders .........................6
GVWR ................................. .231
Hazard Driving Through Flowing, Rising, Or Shallow
Standing Water ......................... .189
Hazard Warning Flasher ..................... .244
Headlights ................................87
Cleaning .............................. .299
Passing ................................88
Head Restraints ............................82
Heated

Mirrors ............................112
Heated Seats ...............................81
Heater, Engine Block ....................... .180
Hill Start Assist ........................... .196
Hitches Trailer Towing .......................... .234
Holder, Cup ............................. .106
Hood Release ..............................85
Ignition ..................................11
Key ...................................11
334 INDEX

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.