key RENAULT CLIO 1997 X57 / 1.G Petrol Engines Workshop Manual

ENGINE AND PERIPHERALS
En
gine repair10
Remove:
- the coolant pipe and the dipstick guide (these
pipes are made water-tight by means of O-rings
which must be replaced after each removal
operation),
- the clutch mechanism and disc,
- the flywheel, immobilising it with the aid of
tool
Mot. 582-01,
- the sump,
- the crankshaft sprocket.
If necessary, use the locally manufactured tool
with the shaft protector end protector
Rou. 15-01.
NOTE :
The crankshaft sprocket can be fitted in one of
two ways:
- sprocket with keyway mounted on the cranks-
haf
t
- sprocket with keyway integral with it.
The two fittings are not interchangeable.
Remove:
- the crankshaft cover plate,
87069R
92311R
92171R
- the pulley, A 12 mm diameter, 1.75 mm thread pitch
B 1 hole, 13 mm diameter
C 2 holes, 6.5 mm diameter
D 12 mm diameter nut, 1.75 mm thread pitch,
welde
d
10-35
Page 1 of 1 E_Series_37
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_37.htm