open bonnet RENAULT FLUENCE Z.E. 2012 Owners Manual

bonnet................................................... (up to the end of the DU)
maintenance: mechanical ...................................... (up to the end of the DU)
4.2
ENG_UD20065_2
Capot moteur (L38 - X38 - Renault)
ENG_NU_914-4_L38e_Renault_4
Jaune NoirNoir texte
Bonnet
Opening the bonnet
Lift the bonnet, release stay 4 from its
holder 5 . For your safety, always fix it
in location 3 on the bonnet.
BOnnet (1/2)
1
2
The engine may be hot
when carrying out opera -
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.In the event of even a slight
impact involving the radia -
tor grille or bonnet, have the
bonnet lock checked by an
authorised dealer as soon as pos -
sible.
3
4
5
Do not do any work under
the bonnet when the vehicle
is charging or when the igni -
tion is switched on.
Unlocking the bonnet catch
To release it, lift tab 2.
To open, pull handle
1 , located on the
left-hand side of the dashboard.

lightsfront ................................................. (up to the end of the DU)
lights changing bulbs ................................ (up to the end of the DU)
changing a bulb .................................... (up to the end of the DU)
bulbs changing ......................................... (up to the end of the DU)
bulbs changing ......................................... (up to the end of the DU)
indicators ............................................................... (current page)
lights: direction indicators ........................................... (current page)
5.14
ENG_UD26810_4
Projecteurs avant : remplacement des lampes (L38 - X38 - Renault)
ENG_NU_914-4_L38e_Renault_5
Jaune NoirNoir texte
Headlights (changing bulbs)
FrONT HEADLIgHTs: changing bulbs (1/2)
Direction indicators
R e m o v e c o v e r B , u n s c r e w b u l b
holder 2 a quarter of a turn and un -
screw the bulb a quarter of a turn.
Bulb type: PY21W.
The bulbs detailed below can be re -
placed. However, we recommend that
these be replaced by an approved
dealer if this proves difficult. After open -
ing the bonnet, unscrew the screws 1
using standard tools or, depending on
the vehicle, using the spanners pro -
vided in the tool kit.
Pull the headlight as far as possible in
the direction shown by the arrow.
Note: the headlight cannot be pulled
out completely. Avoid pulling too hard,
as this could damage the connections.
BCD2431
Obtain an emergency kit containing
a set of spare bulbs and fuses from
an approved Dealer.
Do not do any work under
the bonnet when the vehicle
is charging or when the igni -
tion is switched on.