tow RENAULT KANGOO 2000 KC / 1.G Sheet Metal Work Workshop Manual

Sheet Metal Work
Contents
Page
40
41
44
45
GENERAL INFORMATION
Dimensions 40-1
Engine and equipment 40-2
Towing 40-3
Key to symbols 40-4
Fitting the extension elements 40-5
Description of parts 40-6
Sub-frame dimensions 40-8
Repair bench 40-9
Tools and specific products 40-12
LOWER STRUCTURE
Semi-extreme rear cross member 41-1
Rear floor extender 41-8
UPPER REAR STRUCTURE
Basic body rear wing panel 44-1
Added rear wing panel 44-3
Basic body side panel 44-12
Added side panel 44-14
Side panel extender 44-24
Side inner panel extender 44-28
Upper rear corner stiffener 44-30
Lights mounting side panel rain channel 44-33
TOP OF BODY
Grand volume added roof 45-1
Roof inner panel extender 45-5 P
X
A
Aa
B
Bb
G
I
J
K
Aa
E

GENERAL INFORMATION
Towing
40
40-3
Towing
OBSERVE THE LEGAL TOWING REQUIREMENTS OF THE COUNTRY YOU ARE IN.
NEVER USE THE DRIVESHAFTS AS ATTACHMENT POINTS.
SPECIAL FEATURES OF THE KANGOO GRAND VOLUME
This vehicle does not have a rear towing eye.
FRONT
The towing eye may only be used for towing on the
road.REAR
Under no circumstances should the rear towing ring of
the basic body be used for towing.

LOWER STRUCTURE
Rear floor extender
41Rear floor extender
INTRODUCTION
For a rear impact, replacing this part is an additional
operation to replacing:
–the rearend panel,
–the demi-extreme rear cross member.
IMPORTANT: the separation operation should be
carried out last, when all the other links of the part
have been released, in order to move the part to
separate it.
In the operation described below, only descriptions of
the joints specific to the part concerned are given.
Connections associated with the additional parts are
not taken into consideration. These connections will be
dealt with in their respective sections (refer to
contents).
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with:
–seal contour,
–striker stiffener,
–towing ring plate.PARTS CONCERNED (thickness in mm):
1 Rear floor extender 0.8
2 Rear section rear floor 1
3 Extreme rear cross member 1.2
4 Lights support lower bracket 1
5 Lights mounting side panel rain channel 1.5
6 Side inner panel extender 0.8
7 Central lower extender 1
8 Side cross member 1
9 Seal contour 1
41-8
X