lights RENAULT KANGOO 2013 X61 / 2.G Lighting Workshop Manual

80D-4V1 MR-376-X76-80D000$020.mif
80D
UCH
Vdiag No.: 0F
Side lights:
The side lights are switched on directly using the lighting stalk, via the passenger compartment fuse and relay box.
This function lights all the side lights (front and rear) as well as the number plate lighting.
Dipped beam headlights:
The dipped beam headlights are switched on directly using the lighting stalk, via the passenger compartment fuse
and relay box.
This function lights only the two bulbs providing the dipped headlights function.
Main beam headlights:
The main beam headlights are switched on directly using the lighting stalk, via the passenger compartment fuse and
relay box.
This function lights only the two bulbs providing the main beam headlights function.
Rear fog light:
The rear fog light is switched on directly using the lighting stalk, via the passenger compartment fuse and relay box.
This function lights only the rear fog lights.
Hazard warning lights:
The "hazard warning lights illumination request" signal from the hazard warning lights switch is sent to the UCH,
which controls the hazard warning lights.
This function lights only the hazard warning lights. The UCH also manages the illumination of the hazard warning
lights in the event of impact detection.
Indicators:
The "left-hand or right-hand indicators illumination request" signal initiated by the driver using the lighting stalk is
sent to the UCH, which controls the left-hand and right-hand indicators.
LIGHTING
Fault finding – Role of components

80D-5V1 MR-376-X76-80D000$030.mif
80D
UCH
Vdiag No.: 0F
Indicator lights
• List of system components and associated component codes:
• Indicator lights diagram645Passenger compartment electrical control unit
260Passenger compartment fuse box and relay
125Hazard warning lights switch
172Rear right-hand light
173Rear left-hand light
255Front right-hand indicator light
256Front left-hand indicator light
267Right-hand repeater
268Left-hand repeater
209Lighting stalk
LIGHTING
Fault finding – Operating diagram

80D-6V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Side lights
• List of system components and associated component codes:
• Side lights diagram645Passenger compartment electrical control unit
260Passenger compartment fuse box and relay
166Right-hand number plate light
167Left-hand number plate light
172Rear right-hand light
173Rear left-hand light
184Right-hand side light
185Left hand side lights
209Lighting stalk
247Instrument panel

80D-7V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Main beam headlights
• List of system components and associated component codes:
• Main beam headlights diagram226Right hand headlight
227Left hand headlight
247Instrument panel
260Passenger compartment fuse box and relay
209Lighting stalk

80D-8V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Dipped headlights
• List of system components and associated component codes:
• Dipped beam headlights diagram260Passenger compartment fuse box and relay
226Right hand headlight
227Left hand headlight
247Instrument panel
537Left headlight corrective motor
538Right headlight corrective motor
209Lighting stalk

80D-9V1 MR-376-X76-80D000$030.mif
LIGHTING
Fault finding – Operating diagram80D
UCH
Vdiag No.: 0F
Front fog lights
• List of system components and associated component codes:
• Front fog lights diagram260Passenger compartment fuse box and relay
176Right-hand front fog light
177Left-hand front fog light
231Front fog relay
247Instrument panel
209Lighting stalk

80D-11V1 MR-376-X76-80D000$040.mif
80D
UCH
Vdiag No.: 0F
Layout of the lighting function
The lighting function is provided by the UCH computer. This computer is connected via a wire connection.
The UCH interprets the driver's intention via the steering column switch, then transmits the lighting requests.
These requests are controlled by the UCH.
The UCH also manages the interior lights (courtesy lights, air conditioning indicator light, central door locking
indicator light etc.).
LIGHTING
Fault finding – Function

80D-12V1 MR-376-X76-80D000$040.mif
LIGHTING
Fault finding – Function80D
UCH
Vdiag No.: 0F
The LIGHTING function is divided into two sub-functions: lighting control and lighting power.
This function is managed directly, without the intervention of the UCH.
1. Lighting control
Operated by the driver
The UCH receives the driver's request via the steering column switches and the hazard warning lights button.
View the statuses of the available commands (see Status summary table).
2. Lighting power
The UCH manages the supply to the interior lighting, the heating and air conditioning system indicator lights, and the
central locking indicator lights.
The UCH manages the supply to the indicators.
The functioning of the lights supplied by the UCH can be checked using the actuator commands AC022 Left-hand
indicator, AC023 Right-hand indicator, and AC145 Front courtesy lights.
Functions available and operating mode
– Hazard warning lights illuminated upon impact:
In the event of an impact detected by the airbag computer, this function sends an activation request to the UCH to
illuminate the hazard warning lights.
The function of illuminating the hazard warning lights in the event of an impact is configured using SC008 UCH type
(See 87B, Passenger compartment connection unit). This function is viewed using LC009 Hazard warning
lights illuminated upon impact.

80D-13V1 MR-376-X76-80D000$050.mif
80D
UCH
Vdiag No.: 0F
Configurations of the lighting function in the UCH
Configuration readings available using the diagnostic tool:
• Check the configurations in the Read configurations menu Equipment required:
CLIP diagnostic tool
Configuration
readingName of configuration Option Configuration
LC009Hazard warning lights
illuminated upon impactWITH OR WITHOUT
SC008 UCH type (See 87B,
Passenger compartment
connection unit) LC047 Timed courtesy light WITH OR WITHOUT
LC168 Courtesy light timerAUTHORISED or
PROHIBITED
LIGHTING
Fault finding – Configuration

80D-14V1 MR-376-X76-80D000$060.mif
80D
UCH
Vdiag No.: 0F
NOTESOnly perform this conformity check after a complete check with the diagnostic tool.
The values indicated in this conformity check are given as examples.
Test conditions: Engine stopped, ignition on.
FunctionParameter or status
Checked or actionDisplay and Notes Fault finding
Lighting
controlET484Side lights signalPresent during command
for side lights In the event of a fault, apply
the interpretation of status
ET484.
ET485Hazard warning
lights signalPresent during command
for hazard warning lightsIn the event of a fault, apply
the interpretation of status
ET485.
ET486Right-hand
direction indicator
signalPresent during command
for right-hand direction
indicatorIn the event of a fault, apply
the interpretation of status
ET486.
ET487Left-hand direction
indicator signalPresent during command
for left-hand direction
indicatorIn the event of a fault, apply
the interpretation of status
ET487.
UCH_V0F_CCONF
LIGHTING
Fault finding – Conformity check