bulb RENAULT KANGOO VAN ZERO EMISSION 2012 X61 / 2.G Owners Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: KANGOO VAN ZERO EMISSION, Model: RENAULT KANGOO VAN ZERO EMISSION 2012 X61 / 2.GPages: 220, PDF Size: 4.52 MB
Page 157 of 220

5.1
Section 5: Practical advice
Puncture  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.2
Emergency spare wheel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . .   5.2
Tyre inflation kit . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.3
Tool kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.6
Wheels, trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.7
Changing a wheel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.8
Tyres  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.10
Headlights: changing bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . .   5.13
Fog lights: changing bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . .   5.15
Rear lights: changing bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . .   5.16
Indicator lights: changing bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . .   5.19
Interior lights: changing bulbs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . .   5.20
12 volt battery: troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . .   5.22
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.24
Wiper blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.26
Towing, breakdown  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . .   5.28
Fitted audio equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . .   5.31
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.32
Radio frequency remote control unit: batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . .  5.33
Operating faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5.34 
Page 169 of 220

5.13
Front side light
Open the cover 1.
Disconnect the bulb holder wiring 4.
Remove bulb holder  4 from its housing. 
Replace the bulb.
Bulb type: W5W
To refit it, carry out the above opera-
tions in reverse order.
Bulb type: H4 It is essential to use 55W anti UV bulbs 
to prevent damage to the lights' plastic 
glass.
Do not touch the bulb glass. Hold it 
by its base.
To refit it, carry out the above opera-
tions in reverse order.
Make sure you reposition the wiring in 
its housing before closing the cover  1.
The bulbs are under pres-
sure and can break when 
replaced.
Risk of injury.
HEADLIGHTS : changing bulbs  (1/2)
The engine may be hot 
during operations in close 
proximity. In addition, the 
engine cooling fan may 
start at any moment.
Risk of injury.
Do not do any work under 
the bonnet when the vehicle 
is charging or when the igni-
tion is switched on.
Dipped beam/main beam 
headlights
Open the cover 1.
Disconnect the bulb holder wiring  2.
Unclip spring  3 to remove the bulb 
holder  2.
2
1
4
3   
Page 170 of 220

5.14
HEADLIGHTS : changing bulbs (2/2)
Direction indicator lights
Turn the bulb holder  5 to release it and 
remove it from its location without dis-
connecting the wiring. Replace the 
bulb.
Bulb type: PY21W
To refit it, carry out the above opera-
tions in reverse order.
The bulbs are under pres-
sure and can break when 
replaced.
Risk of injury.
To comply with local legislation, or 
as a precaution, you can obtain an 
emergency kit containing a set of 
spare bulbs and fuses from an ap-
proved Dealer.
5  
Page 171 of 220

5.15
Front fog lights 1
As it is necessary to remove parts or 
components (front bumper),  you are 
advised to have your bulbs replaced 
by an approved dealer.
Bulb type: H16
Additional lights
If you wish to fit your car with fog lights 
or long range headlights, contact an au-
thorised dealer.
FOG LIGHTS: changing bulbs
1
The engine may be hot 
during operations in close 
proximity. In addition, the 
engine cooling fan may 
start at any moment.
Risk of injury.
Any operation on (or modi-
fication to) the electrical 
system must be performed 
by an approved dealer 
since an incorrect connection might 
damage the electrical equipment 
(harness, components and in partic-
ular the alternator). In addition, your 
Dealer has all the parts required for 
fitting these units.
Rear fog lights  2
As it is necessary to remove parts or 
components (rear bumper),  you are 
advised to have your bulbs replaced 
by an approved dealer.
Bulb type: P21 W
2
The bulbs are under pres-
sure and can break when 
replaced.
Risk of injury.   
Page 172 of 220

5.16
The bulbs are under pres-
sure and can break when 
replaced.
Risk of injury.
Bulb type
 4  Indicator
Pear-shaped, bayonet type bulb   
P Y21W.
  5  Side and brake light
Pear-shaped, bayonet type bulb 
with two filaments P 21/5W.
  6 Reversing light
Pear-shaped, bayonet type bulb   
P 21W.Rear lights
Depending on the vehicle, open the 
hinged doors or the tailgate.
Undo bolts  1 using a Torx tool.
Unclip the lower section, then the upper 
section of the light by pulling it towards 
you.
Pull tabs 2 to unclip bulb holders  3.
Replace the bulb, then proceed in the 
reverse order to refit the bulb.
REAR LIGHTS: changing bulbs (1/3)
31
2
2
5
4
6    
Page 173 of 220

5.17
REAR LIGHTS: changing bulbs (2/3)
High-level brake light
– Version with tailgate:  it is located 
above the rear screen, in the centre.
–  Version with hinged doors:  it is lo-
cated above the rear screen, on the 
left-hand door. Remove the two plastic blanking 
covers 7
 from the inside. Unclip the 
light using a screwdriver, by pressing in 
the metal clip housings.
Remove light  8 from the outside. 
Replace the bulb without disconnecting 
the wiring.
Bulb type: W16W
For refitting, proceed in the reverse 
order to removal.
Check the tabs are correctly locked in 
position.
78    
Page 174 of 220

5.18
REAR LIGHTS: changing bulbs (3/3)
Release the light 10 to access bulbs.
Bulb type: W5W.
Replace the bulbs, then fit the light in 
position.Number plate light
Undo two bolts  9 using a Torx tool.
9
10   
Page 175 of 220

5.19
Turn the bulb holder 2 a quarter of a 
turn and take out the bulb.
Bulb type: WY5W.
Replace the bulb and refit the indicator 
light.
Unclip indicator light 
1 on the door side, 
using a flat-blade screwdriver type tool.
INDICATOR LIGHTS: changing bulbs
12   
Page 176 of 220

5.20
Passenger compartment 
lights
Remove the lens 1 using a tool such as 
a flat-blade screwdriver.
INTERIOR LIGHTS:  changing bulbs  (1/2)
1
Pull the bulb  2 to remove it from its 
housing.
Bulb type 2: W6W
Rear courtesy light bulb type: W6W
Replace the bulbs and replace the lens.
2   
Page 177 of 220

5.21
INTERIOR LIGHTS:  changing bulbs  (2/2)
Light  A
Remove the lens using a tool such as a 
flat-blade screwdriver.
Pull the bulb to remove it from its hous-
ing.
Bulb type A: W5W
Replace the bulb and refit the lens.
Light B or C
Remove the lens using a tool such as a 
flat-blade screwdriver.
Pull the bulb to remove it from its hous-
ing.
Bulb type   B or C : W6W
Replace the bulb and refit the lens.
A
B
C