fold seats RENAULT LAGUNA TOURER 2012 X91 / 3.G Owners Manual

rear bench seat..................................... (up to the end of the DU)
rear seats functions .......................................................... (current page)
3.23
ENG_UD13354_2
Banquette arrière (X91 - B91 - K91 - Renault)
ENG_NU_936-5_BK91_Renault_3
The seatbacks can be folded down in
order to transport large objects.
In all situations, lower the rear head -
rests (refer to the information on the
“Rear headrests” in Section 3).
Saloon version
Press button 1 and lower seatback A.
Rear bench seat
REAR BENch SEAT
Sport tourer versions
Press button 2 or pull handle 3 : the
seatback will fold down by itself.
Note: when you are folding a seatback
back up, check that it is correctly locked
(button 2 is flush).
When refitting the seat -
back , make sure it is cor -
rectly locked in place.
If seat covers are fitted ,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
When moving the rear seats, ensure
that nothing obstructs the anchor -
age points (passenger’s arm or leg,
a pet, gravel, cloth, toys, etc.).
1
A
2
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
3
Check that no-one, includ -
ing animals, is in the vicin -
ity of the rear bench seat
before pulling handle 3.
Risk of injury.

transporting objectsin the luggage compartment ........... (up to the end of the DU)
towing rings .......................................... (up to the end of the DU)
towing towing equipment ............................ (up to the end of the DU)
towing equipment fitting ............................................... (up to the end of the DU)
towing a caravan .................................. (up to the end of the DU)
3.30
ENG_UD29077_2
Transport d’objets : dans le coffre / attelage (X91 - B91 - K91 - Renault)
ENG_NU_936-5_BK91_Renault_3
Jaune NoirNoir texte
Transporting objects:
in the boot
Always position the heavi -
est items directly on the
floor. Use the lashing points
on the floor of the luggage
compartment, if these are fitted to
the vehicle. The luggage should be
loaded in such a way that no items
will be thrown forward and strike the
occupants if the driver has to brake
suddenly. Fasten the rear seat belts,
even if the seats are not occupied.
Always place the objects to be trans -
ported so that their largest side rests
against the back of the rear bench seat
for normal loads (e.g.: A), or against the
back of the front seats when the rear
bench seatbacks are folded down.
If you have to place objects on the
folded seat back, it is vital that you
remove the headrests before folding
the seat back so that it can be folded as
flat as possible against the seat.
A
TRANSPoRTINg oBjEcTS IN ThE BooT (1/2)

transporting objectsluggage net ..................................... (up to the end of the DU)
luggage retaining net ............................ (up to the end of the DU)
3.32
ENG_UD20953_5
Filet de séparation (X91 - B91 - K91 - Renault)
ENG_NU_936-5_BK91_Renault_3
Jaune NoirNoir texte
Depending on the vehicle, this may be
used when transporting animals or lug-
gage to isolate them from the passen-
ger section.
It can be positioned:
– behind the rear seats A, rear bench
seat in raised position or rear bench
seat folded;
– behind the front seats B.
Luggage net
Refitting the luggage net
With the rear bench seatbacks 1 com -
pletely folded down, find the roller.
From the right-hand rear door, slide
roller 2 on the rails 3 located on the
back of the large section of the rear
bench seatback: ensure it is correctly
locked by moving it back and forth
gently, then lock the rear bench seat -
backs back into place.
luggAgE NET (1/3)
3
21
The luggage net is de -
signed to retain a maximum
weight of 10 kg.
Risk of injury.
A
B
Removing/refitting the
luggage net
Removing the luggage net
With the rear bench seatbacks 1 com -
pletely folded down, from the right-hand
rear door side, pull roller 2 towards you
until it unclips. Then, lift it so it can be
recovered.

towing rings ........................................................... (current page)
JauneNoirNoir texte
3.33
ENG_UD20953_5
Filet de séparation (X91 - B91 - K91 - Renault)
ENG_NU_936-5_BK91_Renault_3
luggAgE NET (2/3)
Remove rod 5 from its housing
and insert it into the anchorage points 6
(it must be inserted in ring 7).
Fold up the seatbacks and lock them.
Check that they are correctly locked by
moving them back and forth gently.
To remove the net, proceed in the re -
verse order.
5
6
7
5
Positioning the luggage net
Behind the rear seats
From the rear seats, lift covers 4 to
access the anchorage points used as
upper attachments for the net.
To help the net unwind, fold down the
small section of the seatback whilst
holding the large section of the seat -
back in the slightly folded down posi -
tion.
4
During installation, do not
place your fingers under the
roller.
Risk of injury.
57
5
6

3.34
ENG_UD20953_5
Filet de séparation (X91 - B91 - K91 - Renault)
ENG_NU_936-5_BK91_Renault_3
NB: when the luggage net roller is in -
stalled on the back of the large section
of the seatback, a system ensures the
seatback does not fold down uninten -
tionally. It is therefore necessary, after
unlocking the seatback, to tilt it by pull -
ing from the top beyond the point of re-
sistance, from the right-hand rear door
side.
5
When driving, it is forbid -
den to sit in the small sec -
tion of the rear bench seat
if the large section is folded
down, with the net in position.
9
Behind the front seats
With the rear bench seatbacks folded
down, lift cover 8 on each side to
access the anchorage points used as
upper attachments for the net.
Remove rod 5 from its housing and
insert it into the anchorage points 9 (it
must be inserted in ring 7).
To remove the net, proceed in the re -
verse order.
8
7
5
luggAgE NET (3/3)
During installation, do not
place your fingers under the
roller.
Risk of injury.