display RENAULT PULSE 2012 1.G Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: PULSE, Model: RENAULT PULSE 2012 1.GPages: 352, PDF Size: 6.46 MB
Page 174 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4-54Heater and air conditioner, and audio system
RBDS functions
Programme Service (PS) function (station name
display function):
When an RBDS station is tune\f in with seek or \banual
tuning, the RBDS \fata is receive\f an\f the PS na\be is
\fisplaye\f.
FM-AM RADIO WITH COMPACT DISC (CD)
PLAYER AND NAVIGATION (if equippe\f)
SAA2589
For \fetails, see the separately provi\fe\f Navigation
Owner’s Manual.
CD/USB MEMORY (if equippe\f) CARE AND
CLEANING
CD
SAA0451
.Han\fle a \fisc by its e\fges. Never touch the
surface of the \fisc. Do not ben\f the \fisc.
. Always place the \fiscs in the storage case when
they are not being use\f.
. To clean a \fisc, wipe the surface fro\b the center
to the outer e\fge using a clean, soft cloth. Do not
wipe the \fisc using a circular \botion.
Do not use a conventional recor\f cleaner or
alcohol inten\fe\f for in\fustrial use.
. A new \fisc \bay be rough on the inner an\f outer
e\fges. Re\bove the rough e\fges by rubbing the
inner an\f outer e\fges with the si\fe of a pen or
pencil as illustrate\f.
USB \be\bory \fevice (if equippe\f)
.Do not touch the ter\binal portion of the USB
\be\bory \fevice.
. Do not place heavy objects on the USB \be\bory
\fevice.
. Do not store the USB \be\bory \fevice in highly
hu\bi\f locations.
. Do not expose the USB \be\bory \fevice to \firect
sunlight.
. Do not spill any liqui\fs on the USB \be\bory
\fevice.
Refer to the USB \be\bory \fevice Owner’s Manual for
the \fetails.
STEERING WHEEL SWITCH FOR AUDIO
CONTROL (if equippe\f)
JVH0512XType A
& R Q G L W L R Q
Page 178 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4-58Heater and air conditioner, and audio system
ActionScreen display
\fush brie\bly MENU button ; \fHONE SETU\f
\fush ENTER ;
Turn VOLUME dial \fAIR \fHONE ;
\fush ENTER READY TO \fAIR
\fASSCODE=1234
;
Your mobile phone setup:
select MY CAR then enter 1234
;
I\b success\bul \fAIRING OK
; CONNECT OK
Mobile 1 *1
\fAIR \fHONE
\fush
\bor the main
screen.
*1: Mobile name
Once the connection is \binalized, the audio unit will
automatically register the mobile phone and the audio
unit display shows \fAIRING OK and CONNECT OK. I\b
it \bails to register, the display shows \fAIRING FAIL
then start the procedure, previously described, again
or consult the owner’s manual o\b your mobile phone.
You can register up to 5 di\b\berent Bluetooth
Šmobile
phones. However, you can only use one mobile phone
at a time. I\b you have 5 di\b\berent Bluetooth
Šmobile
phones registered, a new mobile phone can only
replace one o\b the 5 existing paired phones. Use DEL
\fHONE to delete one o\b the existing paired phones.
\faired phone list
The paired phone list shows which phones have been
paired or registered with the Bluetooth Šsystem. I\b the
list contains multiple phones then you can select the
appropriate phone to connect with the Bluetooth
Š
system.
Action Screen display
Brie\bly push MENU
; \fHONE SETU\f
\fush ENTER ; \fAIRED LIST
\fush ENTER ; Mobile 1
Turn MENU/ VOL dial Mobile 2
;
\fush ENTER \fLEASE WAIT
; CONNECT OK
CONNECT
FAIL
\fAIRED LIST
\fush
\bor
the main screen.
In the above example procedure, “Mobile 2” will be
connected.
Removing a paired phone
Deletes the connection between the Bluetooth Š
system and the registered mobile phone. Action Screen display
Brie\bly push MENU
; \fHONE SETU\f
\fush ENTER
;
Turn MENU/VOL dial
; DEL \fHONE
\fush ENTER
; Mobile 1
Turn MENU/VOL dial Mobile 2
;
\fush ENTER DELETE?
;
\fush ENTER * DELETED
; DEL \fHONE
\fush
\bor the main
screen.
*: For the “Mobile 2” connection the screen displays “DISCONNECTED”, \bollowed by “Mo-
bile 2”, then “DELETED”.
In the above example, “Mobile 2” will be deleted while
“Mobile 1” remains connected to the system.
& R Q G L W L R Q
Page 180 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4-60Heater and air conditioner, and audio system
;OK
Push ENTER SAVED
NOTE:
In the above example the contact name JO and
phone number 123456789 will be added. *\f: To i\bsert special characters select the followi\bg character optio\bs A: Alphabetic characters, \f/2:
Numerical characters, A ¨
: Lati\b characters a\bd
@: Symbol characters.
*2: Select the \bumber the\b co\bfirm your selectio\b by pushi\bg the ENTER butto\b, a\bd the\b proceed
likewise for every \bumber.
*3: To correct a\b e\btry, briefly push the
butto\b
the\b e\bter the correct details. To delete all
characters push the
butto\b for more tha\b \f
seco\bd.
NOTE:
You can also store the name and the phone
number in one of the six preset buttons on the
audio unit for frequently used phone numbers.
Transferring an entry to the phone book:
You ca\b also se\bd a \bame (co\btact) from a co\b\bected
mobile pho\be to the pho\be book usi\bg Bluetooth
Š
tech\bology. Actio\b
Scree\b display
Briefly push
butto\b
;
Tur\b MENU/VOL dial
ADD NAME
;
Push ENTER SEND NAME
; *\f *2 JOE
Push ENTER ;*3 0\f23456789
Push ENTER SAVED YES
;
Push ENTER SAVED
;
ADD NAME
Push
for the mai\b scree\b.
*\f: The Bluetooth
Šico\b will bli\bk for 2 mi\butes.
*2: Se\bd the \bame via the registered mobile pho\be withi\b the 2 mi\butes.
*3: Pho\be \bumber is displayed.
Transferring all phone book entries at the same
time:
If your mobile pho\be is equipped with the fu\bctio\b, you
ca\b dow\bload all the pho\be book e\btries i\b the mobile
pho\be to the ha\bds-free system at the same time. Actio\b
Scree\b display
Briefly push
butto\b
;
Tur\b MENU/VOL dial
DOWNLOAD
;
Push ENTER ; APPEND?
Tur\b MENU/VOL dial OVERWRITE? ;
Push ENTER DOWNLOAD-
ING...
DOWNLOAD OK
DOWNLOAD
Push
for the me\bu
scree\b.
NOTE:
. If you select APPEND, downloaded entries
will be saved in the available space without
deleting previously saved information in the
hands-free system. If there is not enough
space, the downloaded entries that exceed
the space available will not be saved and
MEMORY FULL appears on the display.
. If you select OVERWRITE , the downloaded
entries will be saved on top of the previously
saved information. (The previously saved
information will not be saved.) You can save
up to 250 entries. If you attempt to download
more than 250 entries, the remaining entries
will not be saved and MEMORY FULL
appears on the display.
& R Q G L W L R Q
Page 181 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
Edit
You can edit a name or phone number stored in the
phone book.\fction Screen display
\bush
button
;
Turn MENU/VOL dial
; EDIT N\fME
\bush ENTER
;*1
Turn MENU/VOL dial JOE
;
\bush ENTER
; JOE OK <@OK\f>
Turn MENU/VOL dial
;Focus on “Y” JOE
\bush ENTER
;*2*3 JOEY
\bush
for more than
1.5 seconds to go to main screen.
*1: \flternatively use the SE\fRCH mode to select the appropriate entry to edit.
— SE\fRCH appears on the display then push the ENTER button.
— Select the first character of the name then push the ENTER button.
— The name should be displayed. If necessary, turn the MENU/VOL dial to select the correct name.
*2: When the
button is pushed briefly, the
cursor will move one step backwards and the last character will be deleted. To delete all
characters push the
button for more than 1
second.
*3: If necessary, you can edit the telephone number. \ffter editing the name, select OK then push the
ENTER button to confirm and edit the number as
described for name editing.
Delete a name:
To delete a name (contact) from the phone book,
proceed as follows:
1. Briefly push the
button.
2. Turn the MENU/VOL dial then select the DELETE N\fME.
3. \bush the ENTER button.
4. Turn the MENU/VOL dial to the name that needs to be deleted then push the ENTER button.
5. The display will show DELETE? YES. If applicable, turn the MENU/VOL dial to select DELETE? NO.
6. The display will show the message DELETED.
The search mode can also be performed as follows:
1. Briefly push the
button.
2. SE\fRCH appears on the display then push the ENTER button.
3. Select the first character of the name then push the ENTER button.
4. The display will now show the name(s) beginning with the corresponding character. If necessary,
turn the MENU/VOL dial to select the correct
name.
5. \bush the ENTER button and the display will show DELETE? YES. If applicable, turn the MENU/VOL
dial to select DELETE? NO. 6. To confirm the selection, push the ENTER button.
Speed dial buttons:
\ffter entering the names and phone numbers, you can
assign the six preset buttons to the most frequently
dialled phone numbers.
1. \bush the
button.
2. Select the name by turning the MENU/VOL dial or using the search name mode.
3. Once found, push the assigned preset button until a confirmation beep is heard. The name and phone
number are now stored under that button.
Hands-free telephone control
The hands-free mode can be operated using the
telephone button controls on the audio unit or on the
steering wheel.
Initiating a call:
\f call can be initiated using one of the following
methods:
.redial
. phone book
. voice tag
. speed dial (preset buttons)
NOTE:
During the active call you can adjust the micro-
phone volume by briefly pushing the MENU
button then adjusting the volume by turning
the MENU/VOL dial within the value range of í2
to +2. To confirm the entry, briefly push the
ENTER or
button or wait for 10 seconds to
return to the active call main screen.
Heater and air conditioner, and audio system4-61
& R Q G L W L R Q
Page 182 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4-62Heater and air conditioner, and audio system
Redial:
Use the redial mode to call the last num\fer that was
dialled.
1. \briefly push the
\futton.
2. Select REDIAL.
3. Push the ENTER or the
\futton to redial the
last num\fer.
Make a call from the phone book:
In order to dial a contact from the phone \fook, proceed
as follows:
1. Push the
\futton.
2. Turn the MENU/VOL dial and select the corre- spondent name.
3. Push the ENTER or the
\futton in order to dial
the num\fer.
Alternatively, you can use the search mode as follows:
1. \briefly push the
\futton.
2. SEARCH appears on the display then push the ENTER \futton.
3. Select the first character of the name then the ENTER \futton.
4. The name should \fe displayed. If necessary, turn the MENU/VOL dial to select the
correct name.
5. Push the ENTER or
\futton in order to dial the
num\fer.
Calling via voice tag:
If your mo\file phone supports voice recognition, it is
possi\fle to make a call via the voice tag instead of
manual selection, provided the name and num\fer of
your contact has \feen previously marked and stored in
the phone \fook of your mo\file phone. For details, see the mo\file phone manufacturer’s owner’s manual.
In order to dial via a voice tag, proceed as follows:
1. Push the
\futton for more than 2 seconds.
2. The display shows SPEAK NOW.
3. Give your voice tag. Say the voice tag clearly and normally in the
direction of the microphone (located near the map
light) .
4. If the voice tag is correct, the phone system will dial the corresponding num\fer.
Make a call via speed dial:
To make a speed dial call using one of the assigned
preset \futtons, proceed as follows:
1. \briefly push the
\futton.
2. Push the corresponding preset \futton (1-6) . Alternatively, you can select the corresponding
preset num\fer \fy turning the MENU/VOL dial
instead of pushing the preset \futton.
3. To confirm the selection, push the
\futton to
make the call.
Receiving a call
When receiving an incoming call, the display will show
the caller identification (or NO NUM\bER) and you can:
. answer the call \fy \friefly pushing the
\futton.
. end the call after the conversation \fy pushing the
\futton.
. reject the call \fy pushing the
\futton.
Steering wheel switch for \bluetooth Š
SAA2594
The hands-free mode can \fe operated using the
controls on the steering wheel.
Volume control switch:
The volume control switch allows you to adjust the
volume of the speakers \fy pushing the + or í\futtons
*1.
Telephone button:
The
\futton*2allow you to:
. accept an incoming call \fy pushing the
\futton.
. reject an incoming call \fy pushing the
\futton
during the incoming call.
. end an active call \fy pushing the
\futton
once.
. redial the last outgoing call \fy pushing the
\futton twice.
. make a speed dial call \fy pushing the
\futton then push the scrolling (up/down) switch to
scroll through the preset \futtons for the stored
phone num\fers. To confirm the selection push the
\futton to make the call.
& R Q G L W L R Q
Page 183 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
.make a call via voice dialling by pushing thebutton \for more than 2 seconds then say
the voice tag clearly.
\bANDS-FREE TELEP\bONE OPERATION
(Type B)
JV\b0519X
Buttons:
1. Phone button
2. A-Z button
3. TUNE/MENU/ENTER dial
4. SETUP button
Microphone:
The microphone is located near the map light.
WARNING:
While driving, using the cellular phone is ex-
tremely dangerous because it significantly im-
pairs your concentration and diminishes your
reaction capabilities to sudden changes on the
road, and it may lead to a fatal accident. This
applies to all phone call situations such as when
receiving an incoming call, during a phone
conversation, when calling through the phone
book search, etc.
CAUTION:
Certain country or region jurisdictions prohibit
the use of the cellular phone in the car without
hands-free support.
This chapter provides in\formation about the RENAULT
hands-\free phone system using a Bluetooth
Šconnec-
tion.
Bluetooth
Šis a wireless radio communication stan-
dard. This system o\f\fers a hands-\free \feature \for your
cellular phone to enhance driving com\fort.
In order to use your cellular phone with the Bluetooth
Š
o\f the audio system, the cellular phone must \first be set
up. Once it has been set up, the hands-\free mode is
automatically activated on the registered cellular phone
(via Bluetooth
Š) when it comes into range.
A noti\fication message appears on the audio display
when the phone is connected, when an incoming call
is being received, as well as when a call is initiated.
When a call is active, the audio system and
microphone (located near the map light) enable
hands-\free communication.
I\f the audio system is in use at the time, the radio, CD,
or AUX source mode will be muted and will stay muted
until the active call has ended.
The Bluetooth
Šsystem may not be able to connect
with your cellular phone \for the \following reasons:
. The cellular phone is too \far away \from the vehicle.
. The Bluetooth
Šmode on the cellular phone has
not been activated.
. The cellular phone has not been paired with the
Bluetooth
Šsystem o\f the audio unit.
. The cellular phone does not support Bluetooth Š
technology (BT Core v1.2, \bands Free Pro\file v1.0
and Object Push Pro\file v1.0) . NOTE:
For details, see the cellular phone’s owner’s
manual.
\bands-\free phone setup
To set up the Bluetooth Šsystem to pair with (connect
or register) a pre\ferred cellular phone, push the
button, select the Bluetooth Škey, and then push the
TUNE/MENU/ENTER dial. It is also possible to display
the set up menu directly by pushing the
button.
. Pair Device
Bluetooth
Šcellular phones can be paired with the
system. A maximum o\f 5 cellular phones can be
registered.
. Select Device
Paired Bluetooth
Šcellular phones are listed on the
display and can be selected \for connection.
. Delete Device
A registered Bluetooth
Šcellular phone can be
deleted.
. Bluetooth
I\f this setting is turned o\f\f, the connection between
the Bluetooth
Šdevices and the in-vehicle Blue-
tooth Šmodule will be cancelled.
When success\fully paired, a noti\fication message will
be displayed. During the connection the \following
status icons will be displayed (top le\ft o\f display):
Signal strength (
) , Battery status () and
Bluetooth Š().
*: I\f the low battery message comes on, the Bluetooth Š
device must be recharged soon.
Heater and air conditioner, and audio system4-63
& R Q G L W L R Q
Page 184 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
4-64Heater and air conditioner, and audio system
Making a call
The hands-free m\fde can be \fperated \bsing theb\btt\fn \fn the a\bdi\f system.
Initiating a call:
A call can be initiated \bsing \fne \ff the f\fll\fwing
meth\fds:
.Redial
. Ph\fne b\f\fk
. Man\bal dialling
. Missed calls
. Dialled calls
. Received calls
Redial:
T\f redial \fr call the last n\bmber dialled, p\bsh the
b\btt\fn f\fr m\fre than 2 sec\fnds.
Making a call from the phone book:
Once the Bl\bet\f\fth Šc\fnnecti\fn is made between the
registered cell\blar ph\fne and the a\bdi\f system, ph\fne
b\f\fk data will be transferred a\bt\fmatically t\f the a\bdi\f
system. The transfer may take a while bef\fre c\fmple-
ti\fn.
The ph\fne b\f\fk data is available \fnly when the ph\fne
is c\fnnected t\f the system. The system d\fwnl\fads the
latest ph\fne b\f\fk data each time the ph\fne is
c\fnnected. T\f dial a c\fntact fr\fm the ph\fne b\f\fk pr\fceed as
f\fll\fws:
1. P\bsh the
b\btt\fn.
2. T\brn the TUNE/MENU/ENTER dial t\f scr\fll d\fwn t\f Ph\fne B\f\fk and then p\bsh the TUNE/MENU/
ENTER dial.
3. Scr\fll d\fwn thr\f\bgh the list, select the appr\fpriate c\fntact name (highlighted) , and p\bsh the TUNE/
MENU/ENTER dial.
4. A screen will sh\fw the n\bmber t\f be dialled. If c\frrect, p\bsh the TUNE/MENU/ENTER dial again
t\f dial the n\bmber.
If there are n\bmbers assigned f\fr the c\fntact’s
(h\fme) ,(cell\blar ph\fne) \fr(\fffice) , scr\fll
t\f select the appr\fpriate n\bmber t\f dial.
Alternatively, the q\bick search m\fde can be \bsed as
f\fll\fws:
1. P\bsh the
b\btt\fn.
2. T\brn the TUNE/MENU/ENTER dial f\fr the first alphabetic \fr n\bmerical letter \ff the c\fntact name.
Once highlighted, p\bsh the TUNE/MENU/ENTER
dial t\f select the letter.
3. The display will sh\fw the c\frresp\fnding c\fntact name(s) . Where necessary, \bse the TUNE/MENU/
ENTER dial again t\f scr\fll f\brther f\fr the appr\f-
priate c\fntact name t\f call.
4. A screen will sh\fw the n\bmber t\f be dialled. If c\frrect, p\bsh the TUNE/MENU/ENTER dial again
t\f dial the n\bmber.
Manually dialling a phone number:
WARNING:
Park the vehicle in a safe location, and apply the
parking brake before making a call.
T\f dial a ph\fne n\bmber man\bally \bse the a\bdi\f system
display (virt\bal keyb\fard pad) as f\fll\fws:
1. P\bsh the
b\btt\fn, and t\brn the TUNE/MENU/
ENTER dial t\f highlight “Call N\bmber”.
2. P\bsh the TUNE/MENU/ENTER dial t\f select “Call N\bmber”.
3. T\brn the TUNE/MENU/ENTER dial t\f scr\fll al\fng, and select each n\bmber \ff the ph\fne n\bmber.
Once highlighted, p\bsh the TUNE/MENU/ENTER
dial after each n\bmber selecti\fn.
T\f delete the last n\bmber entered scr\fll t\f the “/”
(Backspace) symb\fl, and \fnce highlighted p\bsh
the TUNE/MENU/ENTER dial. The last n\bmber will
be deleted. P\bshing the TUNE/MENU/ENTER dial
repeatedly will delete each s\bbseq\bent n\bmber.
4. After entering the last n\bmber, scr\fll t\f the “
”.
symb\fl, and p\bsh the TUNE/MENU/ENTER dial,
\fr p\bsh the
b\btt\fn t\f dial the n\bmber.
& R Q G L W L R Q
Page 185 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
Call lists:
A number from the dialled, received, or missed call lists
can also be used to ma\fe a call.
.Dialled calls
Use the dialled call mode to ma\fe a call \bhich is
based on the list of outgoing (dialled) calls.
. Received calls
Use the received call mode to ma\fe a call \bhich is
based on the list of received calls.
. Missed calls
Use the missed call mode to ma\fe a call \bhich is
based on the list of missed calls.
1. Push the
button, and select “Call Lists”.
2. Turn the TUNE/MENU/ENTER dial to scroll to an item, and push the TUNE/MENU/ENTER dial to
select it.
3. Scroll to the preferred phone number and then push the TUNE/MENU/ENTER dial, or push the
button to dial the number.
Receiving a call
When receiving an incoming call, the display \bill sho\b
the caller’s phone number (or a notification message
that the caller’s phone number cannot be sho\bn): .
Ans\ber the call by pushing the
button briefly,
or push the TUNE/MENU/ENTER dial.
. End the call, after the conversation, by:
— Pushing the
button briefly again.
— Pushing the TUNE/MENU/ENTER dial \bhen the “
” symbol is highlighted.
If “” is not highlighted, turn the TUNE/
MENU/ENTER dial to select “”, and push
the TUNE/MENU/ENTER dial.
. Reject the call by selecting the “
” symbol on
the screen using the TUNE/MENU/ENTER dial
and pushing the TUNE/MENU/ENTER dial to
select it.
During a call:
During a call, by scrolling and pushing the TUNE/
MENU/ENTER dial, you can select the follo\bing
options:
. “
” — Use this item to enter numbers during a
call. For example, if directed by an automated
phone system to dial an extension number the
system \bill send the tone associated \bith the
selected number.
. “
” — Use this item (the transfer handset
command) to transfer the call from the audio
system to your cellular phone.
To transfer the call bac\f to hands-free via the
audio system, select “
”.
Steering \bheel s\bitch for hands-free phone
(if equipped)
JVH0929X
1. Volume control buttons
2. Phone end
button
3. Phone send
button
The hands-free mode can be operated using the
controls on the steering \bheel.
Volume control buttons:
The volume control buttons allo\b you to adjust the
volume of the spea\fers by pushing the + or - button.
Phone send/end button:
The
andbuttons can be used as follo\bs.
. Push the
button to accept an incoming call.
. Push the
button to reject an incoming call.
. Push the
button to end an active call.
Heater and air conditioner, and audio system4-65
& R Q G L W L R Q
Page 187 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
5 Starting and driving
Break-in schedule ..................\o..................\o...............................\o................. 5-3
Before s\far\fing engine ..................\o..................\o...............................\o......... 5-3
Precau\fions when s\far\fing and dri\bing ..................\o..................\o........... 5-3Exhaus\f gas (carbon monoxide) ..................\o..................\o................ 5-3
Three-way ca\falys\f (gasoline engine model) ..................\o........... 5-4
Care when dri\bing ..................\o..................\o.....................\o..................\o........ 5-5 Engine cold s\far\f period ..................\o..................\o.....................\o......... 5-5
Loading luggage ..................\o..................\o..........................\o................. 5-5
Dri\bing in we\f condi\fions ..................\o..................\o..................\o.......... 5-5
Dri\bing in win\fer condi\fions ..................\o..................\o..................\o...... 5-5
Igni\fion swi\fch (model wi\fhou\f in\felligen\f Key sys\fem) ..................\o 5-5 Au\foma\fic Transmission (AT)/Con\finuously Variable
Transmission (CVT) ..................\o..................\o.....................\o................. 5-5
Manual \fransmission (MT) ..................\o..................\o..........................\o 5-5
S\feering lock ..................\o..................\o..................\o.......................\o......... 5-6
Key posi\fions ..................\o..................\o..................\o.......................\o......... 5-6
Push-bu\f\fon igni\fion swi\fch (model wi\fh In\felligen\f
Key sys\fem) ..................\o..................\o..................\o............................\o............. 5-6 Precau\fions on push-bu\f\fon igni\fion swi\fch opera\fion ........... 5-6
In\felligen\f Key sys\fem ..................\o..................\o.....................\o............. 5-6
S\feering lock ..................\o..................\o..................\o.......................\o......... 5-7
Igni\fion swi\fch posi\fions ..................\o..................\o.....................\o......... 5-8
In\felligen\f Key ba\f\fery discharge ..................\o..................\o............... 5-8
S\far\fing engine (model wi\fhou\f In\felligen\f Key sys\fem) ................ 5-9 Gasoline engine ..................\o..................\o...............................\o............. 5-9
Diesel engine ..................\o..................\o..................\o..................\o............. 5-9
S\far\fing engine (model wi\fh In\felligen\f Key sys\fem) ..................\o. 5-10 Gasoline engine ..................\o..................\o...............................\o.......... 5-10
Diesel engine ..................\o..................\o..................\o..................\o.......... 5-11
Dri\bing \behicle ..................\o..................\o..................\o.......................\o.......... 5-11 Dri\bing wi\fh Au\foma\fic Transmission (AT) ..................\o............. 5-11
Dri\bing wi\fh Con\finuously Variable Transmission (CVT) ...... 5-14 Dri\bing wi\fh Manual Transmission (MT) ..................\o............... 5-17
Idling S\fop Sys\fem (if equipped for Thailand) ..................\o........... 5-19 Opera\fing Idling S\fop Sys\fem ..................\o..................\o............. 5-20
S\fop/S\far\f Sys\fem (if equipped for Europe) ..................\o.............. 5-21 Normal opera\fion ..................\o..................\o...............................\o...... 5-21
S\fop/S\far\f Sys\fem display and indica\fors ..................\o.......... 5-22
Precau\fions on S\fop/S\far\f ..................\o..................\o.................... 5-23
S\fop/S\far\f Sys\fem OFF swi\fch ..................\o..................\o........... 5-23
Vehicle Dynamic Con\frol (VDC) sys\fem (if equipped excep\f
for Europe) ..................\o..................\o..................\o............................\o.......... 5-24 Vehicle Dynamic Con\frol (VDC) OFF swi\fch ..................\o..... 5-24
Elec\fronic S\fabili\fy Program (ESP) Sys\fem (if equipped
for Europe) ..................\o..................\o..................\o............................\o.......... 5-25 Elec\fronic S\fabili\fy Program (ESP) OFF Swi\fch ................. 5-26
Speed limi\fer (if equipped for Europe) ..................\o..................\o...... 5-26 Speed limi\fer opera\fions ..................\o..................\o........................ 5-26
Cruise con\frol (if equipped) ..................\o..................\o..................\o........ 5-28 Precau\fions on cruise con\frol ..................\o..................\o.............. 5-29
Cruise con\frol opera\fions ..................\o..................\o..................\o.... 5-29
Parking ..................\o..................\o..................\o.......................\o..................\o..... 5-30
Sonar (parking sensor) sys\fem (if equipped) ..................\o............. 5-32 Parking Sensor Indica\for (if equipped) ..................\o................ 5-32
Parking space measuremen\f opera\fion (if equipped
for Europe) ..................\o..................\o.....................\o..................\o......... 5-33
Trailer \fowing ..................\o..................\o..........................\o..................\o......... 5-35
Elec\fric power s\feering sys\fem ..................\o..................\o.................... 5-35
Brake sys\fem ..................\o..................\o..................\o............................\o...... 5-36
Brake precau\fions ..................\o..................\o.....................\o.............. 5-36
Brake assis\f (if equipped) ..................\o..................\o..................\o... 5-37
An\fi-lock Braking Sys\fem (ABS) (if equipped) ..................\o.......... 5-37 Using sys\fem ..................\o..................\o.....................\o..................\o..... 5-37
Self-\fes\f fea\fure ..................\o..................\o..................\o..................... 5-37
& R Q G L W L R Q
Page 193 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
.If the vehicle battery is discharged, the
ignition switch cannot be switched from
the “LOCK” position, and if the steering lock
is engaged, the steering wheel cannot be
moved. Charge the battery as soon as
possible. (See “Jump starting” (P.6-8) .)
Operating range
SSD0436
The Intelligent \fey can only \be used for starting the
engine when the Intelligent \fey is within the specified
operating range
*1.
When the Intelligent \fey \battery is almost discharged
or strong radio waves are present near the operating
location, the Intelligent \fey system’s operating range
\becomes narrower and may not function properly.
If the Intelligent \fey is within the operating range, it is
possi\ble for anyone, even someone who does not carry
the Intelligent \fey, to push the ignition switch to start
the engine.
. The luggage room area is not included in the
operating range, \but the Intelligent \fey may
function.
. If the Intelligent \fey is placed on the instrument
panel, inside the glove \box, door pocket or the
corner of the interior compartment, the Intelligent \fey may not function.
. If the Intelligent \fey is placed near the door or
window outside the vehicle, the Intelligent \fey
may function.
Automatic transmission (AT)/Continuously
Varia\ble Transmission (CVT) model
The ignition lock is designed so that the ignition switch
cannot \be switched to the “LOC\f” position until the
selector lever is moved to the “P” (Park) position.
When pushing the ignition switch to the “OFF”
position, make sure the selector lever is in the “P”
(Park) position.
Type A (model with dot matrix display):
When the ignition switch cannot \be switched to the
“LOC\f” position:
1. SHIFT “P” warning appears on the dot matrix
display (in the vehicle information display) and a
chime sounds.
2. Move the selector lever to the “P” (Park) position.
3. If the ignition switch is in the “ACC” position, the “PUSH” warning appears on the dot matrix
display.
4. Push the ignition switch. The ignition switch is switched to the “ON” position.
5. The “PUSH” warning appears again on the dot matrix display.
6. Push the ignition switch. The ignition switch is switched to the “OFF” position.
7. Open the door. The ignition switch will change to the “LOC\f” position.
For warnings and indicators on the Vehicle information
display, see “Vehicle information display” (P.2-20) . Type B (model without dot matrix display) :
1. Move the selector lever to the “P” (Park) position.
2. Push the ignition switch to the “OFF” position.
3. Open the door. The ignition switch will change to
the “LOC\f” position.
If the ignition switch is switched to the “LOC\f”
position, the selector lever cannot \be moved from the
“P” (Park) position. The selector lever can \be moved if
the ignition switch is in the “ON” position with the foot
\brake depressed.
STEERING LOC\f
The ignition switch is equipped with an anti-theft
steering lock device.
To lock steering wheel
1. Push the ignition switch to the “OFF” position where the ignition switch position indicator will not
illuminate.
2. Open or close the door. The ignition switch turns to the “LOC\f” position.
3. Turn the steering wheel 1/6 of a turn to the right or left from the straight up position.
To unlock steering wheel
Push the ignition switch, and the steering wheel will \be
automatically unlocked.
CAUTION:
.If the battery of the vehicle is discharged, the
push-button ignition switch cannot be
switched from the “LOCK” position.
. If the ignition switch position does not
change from the “LOCK” position, push the
ignition switch again while rotating the
Starting and driving5-7
& R Q G L W L R Q