clock reset RENAULT PULSE 2012 1.G Owners Manual


> (GLW    0RGHO .$2(0 B5HQDXOW @
SIC4425
Type A1. Speedometer (P.2-8\f
2. Trip odometer reset s\bitch/trip computer modes\bitch (P.2-8\f
3. Clock adjusting knob (P.2-38\f
4. Odometer/t\bin trip odometer/trip computer/ clock (P.2-8\f
5. Fuel gauge (P.2-10\f
Illustrated table of contents0-11
METERS AND GAUGES
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
0-12Illustrated table of contents
JVC0008X
Type B1. Tachometer \fP.2-10)
2. S\beedometer \fP.2-8)
3. Tri\b odometer reset switch/tri\b com\buter modeswitch \fP.2-8)
4. Clock adjusting knob \fP.2-38)
5. Automatic Transmission \fAT)/Continuously Vari- able Transmission \fCVT) \bosition indicator*
\fP.2-10, P.5-11)/Cruise control and s\beed limit-
er dis\blay* \fP.5-28, P.5-26) 6. Odometer/twin tri\b odometer/tri\b com\buter/
clock \fP.2-8)
7. Fuel gauge \fP.2-10)
*: if equi\b\bed
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
JVC0074X
Type C1. Tachometer (\f.2-10)
2. \bpeedometer (\f.2-8)
3. Vehicle information display (\f.2-8, \f.2-20)
4. Trip odometer reset switch (\f.2-8)
5. Automatic Transmission (AT)/Continuously Vari-able Transmission (CVT) position indicator*
(\f.2-10, \f.5-11)
6. Odometer/twin trip odometer/clock (\f.2-8)
*: if equipped
Illustrated table of contents0-13
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-8Instruments and controls
JVC0074X
Type C1. Tachome\fer
2. Spee\bome\fer
3. Vehicle informa\fion \bisplay
4. Trip o\bome\fer rese\f swi\fch
5. Au\foma\fic \fransmission (A/T)/Con\finuously Vari-able Transmission (CVT) posi\fion in\bica\for*
6. O\bome\fer/\fwin \frip o\bome\fer/clock
*: if equippe\b
SPEEDOMETER AND ODOMETER
Spee\bome\fer
The spee\bome\fer in\bica\fes \fhe vehicle spee\b.
O\bome\fer/Twin \frip o\bome\fer (for Type A an\b
B)
SIC4427Type A and BThe o\bome\fer/\fwin \frip o\bome\fer is \bisplaye\b when
\fhe igni\fion swi\fch is in \fhe “ON” posi\fion.
The o\bome\fer
*1\bisplays \fhe \fo\fal \bis\fance \fhe
vehicle has been \briven.
The \fwin \frip o\bome\fer
*2\bisplays \fhe \bis\fance of
in\bivi\bual \frips.
Changing twin trip odometer display:
Push \fhe rese\f swi\fch
*3\fo change \fhe \bisplay as
follows:
TRIP A ?TRIP B ?Trip compu\fer mo\be ?TRIP A
Resetting twin trip odometer:
Push \fhe rese\f swi\fch
*3for more \fhan 1 secon\b \fo
rese\f \fhe \frip o\bome\fer \fo zero.
For \frip compu\fer informa\fion, see “Trip compu\fer (for
Type A an\b B)” (P.2-9) .
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
Accumulated time and current saved fuel
consumption (ml (mililiter)) \fy Idling \btop
\bystem (if equipped for Thailand)
JVI0011XType A
JVC0021XType BTheswitch*Bis used in the setting mode to
select and decide a menu of Type A and B.
Accumulated time (Type A):
The Accumulated time mode shows the accumulated
time Idling \btop \bystem has \feen operated since the
last reset.
Resetting is done \fy pushing the
switch*Bfor
longer than 1 second. (The saved fuel is also reset at
the same time.) Current saved fuel consumption (Type A):
The Current saved fuel consumption mode shows the
current saved fuel consumption \fy Idling \btop \bystem
has \feen operated since the last reset.
Accumulated time (Type B):
The Accumulated time mode shows the accumulated
time Idling \btop \bystem has \feen operated since the
time the ignition switch was turned ON.
Resetting is done \fy pushing the
switch*Bfor
longer than 1 second. (The saved fuel is also reset at
the same time.)
Current saved fuel consumption (Type B):
The Current saved fuel consumption mode shows the
current saved fuel consumption \fy Idling \btop \bystem
has \feen operated since the time the ignition switch
was turned ON. \bee “Idling \btop \bystem (if equipped
for Thailand)” (P.5-19) .
\betting
JVI0013X
Setting cannot be made while driving. A mes-
sage “Setting can only be operated when
stopped” is also displayed on the vehicle
information display.
The
switch*Aandswitch*Bare used in the setting mode to select and set a menu.
SKIP:
Push the
switch*Ato move to the warning
check mode.
Push the
switch*Bto select other menus.
ALERT:
The alert menu can \fe set to notify the following items.
. TIMER
\belect this su\fmenu to specify when the "time to
rest" indicator activates.
. ICY
\belect this su\fmenu to display the low outside
temperature warning.
To return to the top page of the setting mode, select
“BACK”.
TIME SETTING (CURRENT TIME) :
. CURRENT TIME
Adjust the date and time (hour and minute) of the
clock on the meter.
TIME SETTING (Birthday and Anniversary):
The \firthday and anniversary message reminds you of
the anniversary or a \firthday the driver should
remem\fer.
. BIRTHDAY
\belect this su\fmenu to adjust the date of the
Birthday message.
. ANNIVER\bARY
\belect this su\fmenu to adjust the date of the
Anniversary message.
\belect the display image to set the desired display
image of the Anniversary message.
Instruments and controls2-27
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
2-38Instruments and controls
3. Pull up and hold the driver\fs window switch toclose the driver\fs window. \bold the switch for
approximately 3 seconds after the window has
been fully closed, and then release it.
4. Check if the power window functions operate properly.
If you open or close the power window continuously, it
may cause the power window not to operate properly.
Perform the above procedure.
If the power window functions do not operate properly
after performing the above procedure, repeat the
steps. See a RENAULT dealer, if necessary, for
checking the power window system.WARNING:
Never allow hands, fingers, or any part of your
body within operating range of the sunshade.
You could be injured.
CAUTION:
. Do not place any heavy objects on the roof
glass or surrounding area.
. Do not hang from the sunshade and/or the
sunshade opening or hang any objects from
it. It may cause damage or deformation to
the sunshade.
. Close the sunshade when you leave the
vehicle for extended periods of time to
prevent the inside of the vehicle from reach-
ing high temperatures.
JVI0020X
To open or close the sunshade, operate the knob*A.
To open the sunshade, slide it toward the rear of the
vehicle
*1. To close, slide the sunshade toward the
front of the vehicle*2. If the battery cable is disconnected, the clock will reset
its time and the correct time will not be indicated.
Readjust the time.
For model with the vehicle information display, see
“Vehicle information display” (P.2-20)
For the clock adjustment in the audio unit (if equipped) .
See “Audio system” (P.4-8) .
ADJUSTING TIME
Meter display model (if equipped)
SIC4406
The digital clock*2in the meter displays the time
when the ignition switch is in the “ON” position.
To display the clock, push the adjusting knob
*1. To
adjust the time, perform the following procedure.
1. Push the clock adjusting knob
*1for 3 seconds
or more to enter time adjust mode.
The hours display will start to flash.
2. Push the clock adjusting knob
*1to adjust the
hour.
To advance the time, hold down the knob
*1.
3. Wait at least 5 seconds for the minute display to flash.
SUNSHADE (if equipped) CLOCK
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
4. Push the clock adjusting knob*1to adjust the
\finutes.
To advance the ti\fe, hold do\bn the knob
*1.
Wait at least 5 seconds for the second display “:”
to flash.
5. Push the clock adjusting knob
*1to reset the
second counter.
The selected values \bill be stored if no user input is
detected for 60 seconds, or can be reset by using the
adjusting knob.
SIC4436
The po\ber outlet is for po\bering electrical accessories
such as cellular telephone.
CAUTION:
. The outlet and plug may be hot during or
immediately after use.
. This power outlet is not designed for use
with a cigarette lighter unit.
. Do not use with accessories that exceed a 12
volt, 120W (10A) power draw. Do not use
double adapters or more than one electrical
accessory.
. Use power outlets with the engine running
to avoid discharging the vehicle battery.
. Avoid using power outlets when the air
conditioner, headlights or rear window de-
fogger is on.
. Before inserting or disconnecting a plug, be
sure to turn off the power switch of electrical
accessory being used and the ignition
switch.
. Push the plug in as far as it will go. If good
contact is not made, the plug may overheat
or the internal temperature fuse may open. .
Do not allow water to contact the outlet.
. When not in use, be sure to close the cap.
Instruments and controls2-39
POWER OUTLETS (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
16. Radio memory buttons
17. RP\f (Repeat)\bMIX (Mix play) button
Anti-theft system (if equipped)
\fhis unit can only be activated when the ignition switch
for Anti-\fheft System is in the “ACC” or “ON” position.
Each radio is uniquely matched to the vehicle’s
immobilizer and therefore cannot be transferred to
any other vehicle.
Audio main operation
\fhe audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
\fo turn on the audio system, push the POWER ON\b
OFF button.
.\fhe system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
\fo turn off the audio system, push the POWER ON\b
OFF button.
Volume control:
\fo control the volume, turn the VOLUME control dial.
\furn the VOLUME control dial clockwise to make the
sound louder.
\furn the VOLUME control dial counterclockwise to
make the sound quieter.
Sound preference button:
\fo enter the audio mode (radio or CD) , push the
button. When no CD is loaded, the audio system will
automatically switch to the radio mode. \fo change the audio settings (BASS, \fREBLE,
FADER, BALANCE, EQ) , push the
button or
EN\fER button to select the mode.
BASS ?\fREBLE ?BALANCE ?FADER ?EQ ?
BASS
\fo adjust each audio setting, turn the VOL control dial
clockwise or counterclockwise.
BASS: (í) to decrease \b (+) to increase
\fREB(LE): (í) to decrease \b (+) to increase
BAL(ANCE): (R) to right balance \b (L) to left balance
FADE(R): (F) to front fade \b (R) to rear fade
EQ (Equalizer): Use this control to change the preset
sound mode for CD play.
\furn the MENU\bVOL dial clockwise or counterclock-
wise. \fhe mode will change as follows:
OFF ⇔ENHANCE
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
MENU button:
\fo configure the SPEED volume and BEEP settings,
perform the following procedure:
1. Push the MENU button.
2. \furn the VOLUME dial clockwise or counter- clockwise. \fhe display message will change as
follows:
PHONE SE\fUP ⇔SPEED VOL⇔CLOCK ⇔
BEEP ⇔PHONE SE\fUP
. When SPEED VOL appears on the display, briefly
push on the EN\fER button then turn the VOLUME
dial clockwise or counterclockwise to adjust the
level of the volume. Adjusting the setting to 0 (zero) turns off the
speed volume feature. Increasing the speed
volume setting results in the audio volume
increasing more rapidly with vehicle speed. Push
the EN\fER button again to save the setting.
. When BEEP appears on the display, briefly push
the EN\fER button and then turn the VOLUME dial
clockwise or counterclockwise to switch the beep
sound on or off. Push the EN\fER button again to
save the setting.
\fo configure Alternative Frequency, Regional and
Language settings, perform the following procedure:
1. Push and hold the MENU button for at least 1.5 seconds.
2. \furn the VOLUME dial clockwise or counter- clockwise. \fhe display message will change as
follows:
AF⇔REG ⇔LANGUAGE ⇔AF
. \fo activate or deactivate the AF and REG mode,
briefly push on the EN\fER button when AF or
REG appears on the display and turn the
VOLUME dial clockwise or counterclockwise to
switch between the off or on position. After
selection, push the EN\fER button to confirm the
settings.
— When the AF mode is enabled, the audio unit
will automatically re-tune to a stronger fre-
quency if the radio signal becomes weak.
— When the REG mode is enabled, the audio unit will maintain and hold the station which is
broadcasting local (regional) programmes.
. \fo change the display language, briefly push the
EN\fER button when LANGUAGE appears on the
display then turn the VOLUME dial clockwise or
counterclockwise to select the appropriate lan-
guage setting.
Heater and air conditioner, and audio system4-25
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
4-36Heater and air conditioner, and audio system
Anti-theft system (if equipped\f
This unit can \bnly be activated when the igniti\bn switch
f\br Anti-Theft System is in the “ACC” \br “ON” p\bsiti\bn.
Each radi\b is uniquely matched t\b the vehicle’s
imm\bbilizer and theref\bre cann\bt be transferred t\b
any \bther vehicle.
Audi\b main \bperati\bn
The audi\b system \bperates when the igniti\bn switch is
in the “ACC” \br “ON” p\bsiti\bn.
POWER ON/OFF button:
T\b turn \bn the audi\b system, push the POWER ON/
OFF butt\bn.
.The system will turn \bn in the m\bde, (radi\b \br CD\f
which was used immediately bef\bre the system
was last turned \bff.
. If there is n\b CD l\baded, the radi\b will be turned
\bn.
T\b turn \bff the audi\b system, push the POWER ON/
OFF butt\bn.
Volume control:
T\b c\bntr\bl the v\blume, turn the VOLUME c\bntr\bl dial.
Turn the VOLUME c\bntr\bl dial cl\bckwise t\b increase
the audi\b v\blume.
Turn the VOLUME c\bntr\bl dial c\buntercl\bckwise t\b
decrease the audi\b v\blume.
Sound preference button:
T\b enter the audi\b m\bde (radi\b \br CD\f , push the
butt\bn.
T\b change the audi\b settings (BASS, TREBLE, FADE,
BALANCE, EQ\f , push the
butt\bn \br ENTER
butt\bn t\b select the m\bde. BASS
?TREBLE ?BALANCE ?FADE ?EQ ?
BASS
T\b adjust each audi\b setting, turn the MENU/VOL
c\bntr\bl dial cl\bckwise \br c\buntercl\bckwise.
BASS: (í\f t\b decrease / (+\f t\b increase
TREB(LE\f: (í\f t\b decrease / (+\f t\b increase
BAL(ANCE\f: (R\f t\b adjust t\b the right / (L\f t\b adjust t\b
the left
FADE(R\f: (F\f t\b adjust t\b the fr\bnt / (R\f t\b adjust t\b the
rear
EQ (Equalizer\f: Use this c\bntr\bl t\b change the preset
s\bund m\bde f\br CD play.
Turn the MENU/VOL dial cl\bckwise \br c\buntercl\bck-
wise. The m\bde will change as f\bll\bws:
OFF ⇔ENHANCE ⇔OFF
If the audi\b settings m\bde is unchanged f\br appr\bxi-
mately 5 sec\bnds, the audi\b settings m\bde will
aut\bmatically return t\b the n\brmal m\bde.
Clock display:
Turning on/off the clock display
T\b turn \bn \br \bff the cl\bck display, perf\brm the
f\bll\bwing \bperati\bns.
1. Push the MENU butt\bn while the audi\b system is \bn.
2. Turn the VOLUME c\bntr\bl dial until "CLOCK" appears \bn the display.
3. Push the ENTER butt\bn. ("CLOCK OFF" \br "CLOCK ON" is displayed.\f
4. T\b turn \bn the cl\bck display, turn the VOLUME c\bntr\bl dial till "CLOCK ON" is displayed. T\b turn
\bff the cl\bck display, turn the VOLUME c\bntr\bl dial
till "CLOCK OFF" is displayed, and push ENTER. Clock adjustment
T\b adjust the time \bf the cl\bck, perf\brm the f\bll\bwing
\bperati\bns.
1. Push the ENTER butt\bn while "CLOCK ON" is
displayed.
2. The h\bur display will flash.
3. Turn the VOLUME c\bntr\bl dial t\b adjust the h\bur.
4. Push the ENTER butt\bn. The minute display will flash.
5. Turn the VOLUME c\bntr\bl dial t\b adjust the minute.
6. Push the ENTER butt\bn t\b c\bmplete the cl\bck adjustment.
Mute button:
Push the MUTE butt\bn t\b mute the audi\b system.
MUTE appears \bn the display. T\b unmute, use any \bne
\bf the f\bll\bwing \bpti\bns:
. Push the MUTE butt\bn again.
. Turn the VOLUME c\bntr\bl dial.
. Push the CD, FM \br AM butt\bn.
. Push the AUX butt\bn.
AUX button:
The AUX IN jack is l\bcated \bn the audi\b unit. The AUX
IN audi\b input jack accepts any standard anal\bg audi\b
input such as fr\bm a p\brtable cassette tape player, CD
player, MP3 player \br lapt\bp c\bmputer.
Push the AUX butt\bn t\b play a c\bmpatible device when
it is plugged int\b the AUX IN jack.
RENAULT str\bngly rec\bmmends using a stere\b mini
plug cable when c\bnnecting y\bur music device t\b the
audi\b system. Music may n\bt play pr\bperly when a
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
17. AUX IN (auxiliary input\f jack
1\b. RPT (Repeat\f/MIX (Mix play\f button
19. TUNE/SEARCH button
Anti-theft system (if equipped\f
This unit can only be activated when the ignition switch
for Anti-Theft System is in the “ACC” or “ON” position.
Each radio is uniquely matched to the vehicle’s
immobilizer and therefore cannot be transferred to
any other vehicle.
Audio main operation
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
To turn on the audio system, push the POWER ON/
OFF button.
.The system will turn on in the mode, (radio or CD\f
which was used immediately before the system
was last turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the POWER ON/
OFF button.
Volume control:
To control the volume, turn the VOLUME control dial.
Turn the VOLUME control dial clockwise to increase
the audio volume.
Turn the VOLUME control dial counterclockwise to
decrease the audio volume.
Sound preference button:
To enter the audio mode (radio or CD\f , push the
button. When no CD is loaded, the audio system will
automatically switch to the radio mode.
To change the audio settings (BASS, TREBLE,
FADER, BALANCE, EQ\f , push the
button or
ENTER button to select the mode.
BASS ?TREBLE ?BALANCE ?FADER ?EQ ?
BASS
To adjust each audio setting, turn the MENU/VOL
control dial clockwise or counterclockwise.
BASS: (í\f to decrease / (+\f to increase
TREB(LE\f: (í\f to decrease / (+\f to increase
BAL(ANCE\f: (R\f to adjust to the right / (L\f to adjust to
the left
FADE(R\f: (F\f to adjust to the front / (R\f to adjust to the
rear
EQ (Equalizer\f: Use this control to change the preset
sound mode for CD play.
Turn the MENU/VOL dial clockwise or counterclock-
wise. The mode will change as follows:
OFF ⇔ENHANCE ⇔OFF
If the audio settings mode is unchanged for approxi-
mately \b seconds, the audio settings mode will
automatically return to the normal mode.
Clock display:
Turning on/off the clock display
To turn on or off the clock display, perform the
following operations.
1. Push the MENU button while the audio system is on. ("PHONE SETUP" is displayed.\f 2. Turn the VOLUME control knob until "CLOCK"
appears on the display.
3. Push the ENTER button. ("CLOCK OFF" or "CLOCK ON" is displayed.\f
4. To turn on the clock display, turn the VOLUME control knob till "CLOCK ON" is displayed. To turn
off the clock display, turn the VOLUME control
knob till "CLOCK OFF" is displayed, and push
ENTER.
Clock adjustment
To adjust the time of the clock, perform the following
operations.
1. Push the ENTER button while "CLOCK ON" is displayed.
2. The hour display will flash.
3. Turn the VOLUME control knob to adjust the hour.
4. Push the ENTER button. The minute display will flash.
5. Turn the VOLUME control knob to adjust the minute.
6. Push the ENTER button to complete the clock adjustment.
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analog audio
input such as from a portable cassette tape player, CD
player, MP3 player or laptop computer.
Push the AUX button to play a compatible device when
it is plugged into the AUX IN jack.
RENAULT strongly recommends using a stereo mini
plug cable when connecting your music device to the
audio system. Music may not play properly when a
Heater and air conditioner, and audio system4-41
&RQGLWLRQ