oil RENAULT PULSE 2012 1.G Owners Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: PULSE, Model: RENAULT PULSE 2012 1.GPages: 352, PDF Size: 6.46 MB
Page 8 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
0-4Illustrated table of contents
JVC0230X
1. Stop/tail li\fhts (\b.8-29)
2. Rear window— Wiper and washer switch* (\b.2-34)
— Rear window defo\f\fer* (\b.2-35)
3. Hi\fh-mounted stop li\fht (Model with rear spoiler) (\b.8-29)
4. Hi\fh-mounted stop li\fht (Model without rear spoiler) (\b.8-29)
5. Fuel — Fuel filler lid (\b.3-19) — Fuel recommendation (\b.9-3)
6. Turn si\fnal li\fhts — Switch operation (\b.2-31)
— Bulb replacement (\b.8-29)
7. Reverse li\fhts/Rear fo\f li\fht* — Switch operation (\b.2-32)
— Bulb replacement (\b.8-29)
8. Sonar (parkin\f sensor) system* (\b.5-32)
9. Back door (\b.3-19)
— Back door operation (\b.3-19) — Intelli\fent Key system* (\b.3-9)
— Remote keyless entry system* (\b.3-7)
10. License plate li\fht (\b.8-29)
*: if equipped
EXTERIOR REAR
& R Q G L W L R Q
Page 18 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
0-14Illustrated table of contents
HR12DDR ENGINE MODEL
JVO0032X
1\f Bra\be and clutch* fluid reservoir (P\f8-18,P\f8-19)
— Right-Hand Drive (RHD) model
2\f Engine drive belts (P\f8-15)
3\f Engine oil filler cap (P\f8-10)
4\f Air cleaner (P\f8-20)
5\f Bra\be and clutch* fluid reservoir (P\f8-18, P\f8-19) — Left-Hand Drive (LHD) model
6\f Fuse/fusible lin\b box (P\f8-26)
7\f Window washer fluid reservoir (P\f8-22)
8\f Engine oil dipstic\b (P\f8-10)
9\f Radiator cap (P\f8-8)
10\f Battery (P\f8-23)
11\f Engine coolant reservoir (P\f8-9)
*: For Manual Transmission (MT) Model
ENGINE COMPARTMENT
& R Q G L W L R Q
Page 19 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
HR12DE ENGINE MODEL
JVC0117X
1. E\fgi\fe \brive belts (P.8-15)
2. Brake a\f\b clutch* flui\b reservoir (P.8-18,P.8-19)
— Right-Ha\f\b Drive (RHD) mo\bel
3. E\fgi\fe oil filler cap (P.8-10)
4. Air clea\fer (P.8-20)
5. Brake a\f\b clutch* flui\b reservoir (P.8-18, P.8-19)
— Left-Ha\f\b Drive (LHD) mo\bel 6. Fuse/fusible li\fk box (P.8-26)
7. Wi\f\bow washer flui\b reservoir (P.8-22)
8. E\fgi\fe oil \bipstick (P.8-10)
9. Ra\biator cap (P.8-8)
10. Battery (P.8-23)
11. E\fgi\fe coola\ft reservoir (P.8-9)
*: For Ma\fual Tra\fsmissio\f (MT) Mo\bel
Illustrated table of contents0-15
& R Q G L W L R Q
Page 30 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
1-8Safety — seats, seat belts and supplemental restraint system
WARNING:
.Seatbelts are designed to bear upon the
bony structure of the body, and should be
worn low across the front of the pelvis or the
pelvis, chest and shoulders, as applicable;
wearing the lap section of the belt across
the abdominal area must be avoided. Ser-
ious injury may occur if a seat belt is not
worn properly.
. Position the lap belt as low and snug as
possible around the hips, not the waist. A
lap belt worn too high could increase the
risk of internal injuries in an accident.
. Do not allow more than one person to use
the same seat belt. Each belt assembly must
only be used by one occupant; it is danger-
ous to put a belt around a child being carried
on the occupant’s lap.
. Never carry more people in the vehicle than
there are seat belts.
. Never wear seat belts inside out. Belts
should not be worn with straps twisted.
Doing so may reduce their effectiveness.
. Seatbelts should be adjusted as firmly as
possible, consistent with comfort, to provide
the protection for which they have been
designed. A slack belt will greatly reduce the
protection afforded to the wearer.
. Every person who drives or rides in this
vehicle should use a seat belt at all times.
Children should be properly restrained in the
rear seat and, if appropriate, in a child
restraint system. .
Do not run the belt behind your back or
under your arm. Always route the shoulder
belt over your shoulder and across your
chest. The belt should be away from your
face and neck, but not falling off your
shoulder. Serious injury may occur if a seat
belt is not worn properly.
. No modifications or additions should be
made by the user which will either prevent
the seat belt adjusting devices from operat-
ing to remove slack, or prevent the seat belt
assembly from being adjusted to remove
slack.
. Care should be taken to avoid contamina-
tion of the webbing with polishes, oils and
chemicals, and particularly battery acid.
Cleaning may safely be carried out using
mild soap and water. The belt should be
replaced if webbing becomes frayed, con-
taminated or damaged.
. It is essential to replace the entire assembly
after it has been worn in a severe impact
even if damage to the assembly is not
obvious.
. All seat belt assemblies including retractors
and attaching hardware should be inspected
after any collision by a RENAULT dealer. It is
essential to replace the entire assembly
after it has been worn in a severe impact
even if damage to the assembly is not
obvious. RENAULT recommends that all seat
belt assemblies in use during a collision be
replaced unless the collision was minor and
the belts show no damage and continue to
operate properly. .
Seat belt assemblies not in use during a
collision should also be inspected and, when
necessary, replaced if either damage or
improper operation is noted.
CHILD SAFETY
WARNING:
.Infants and children need special protection.
The vehicle’s seat belts may not fit them
properly. The shoulder belt may come too
close to the face or neck. The lap belt may
not fit over their small hipbones. In an
accident, an improperly fitted seat belt could
cause serious or fatal injury.
. Always use an appropriate child restraint
system.
Child\fen need ad\blts to help p\fotect them. They need
to be p\fope\fly \fest\fained. The p\fope\f \fest\faint depends
on the child’s size.
Infants and small child\fen
SSS0099
RENAULT \fecommends that infants and small child\fen
be seated in a child \fest\faint system. Yo\b sho\bld
choose a child \fest\faint system that fits yo\b\f vehicle
& R Q G L W L R Q
Page 66 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-12Instruments and controls
Anti-lock Braking Syste\f (ABS) warning
lig\bt*Seat belt warning lig\bt*Overdrive off indicator lig\bt*
Brake warning lig\btSupple\fental Restraint Syste\f (SRS) air
bag warning lig\bt*Rear fog lig\bt indicator lig\bt*
C\barge warning lig\btWater-in-fuel-filter warning lig\bt (diesel en-
gine \fodel)Security indicator lig\bt*
Door open warning lig\bt*Cruise control on indicator lig\bt*Slip indicator lig\bt*
Electric power steering warning lig\btCruise control/speed li\fiter set indicator
lig\bt*Speed li\fiter indicator lig\bt*
Engine oil pressure warning lig\btElectronic Stability Progra\f (ESP) off in-
dicator lig\bt*SPORT \fode indicator lig\bt*
Hig\b te\fperature warning lig\bt (red)Front fog lig\bts indicator lig\bt*Stop/Start Syste\f indicator lig\bt (if equipped
for Europe)/Idling Stop Syste\f indicator lig\bt
(if equipped for T\bailand)
Intelligent Key syste\f warning lig\bt*Front passenger air bag status lig\bt*Turn signals/\bazard indicator lig\bts
Low fuel warning lig\bt*Glow plug indicator lig\bt (diesel engine
\fodel)Ve\bicle Dyna\fic Control (VDC) off indicator
lig\bt*
Malfunction warning lig\bt (red) (diesel en-
gine \fodel)Hig\b bea\f indicator lig\bt*: if equipped
Master warning lig\bt*Low te\fperature indicator lig\bt (green)*
P position selecting warning lig\bt*Malfunction Indicator Lig\bt (MIL)
WARNING/INDICATOR LIGHTS AND
AUDIBLE REMINDERS
& R Q G L W L R Q
Page 68 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-14Instruments and controls
CAUTION:
Do not continue driving if the alternator belt is
loose, broken or missing.
Door open warning light (if e\fuipped)
\bhen the ignition switch is in the “ON” position, the
door open warning light illuminates if any of the doors
are open or not closed securely.
Electric power steering warning light
\bhen the ignition switch is in the “ON” position, the
electric power steering warning light illuminates. After
starting the engine, the electric power steering warning
light turns off. This indicates the electric power
steering system is operational.
If the electric power steering warning light illuminates
while the engine is running, it may indicate the electric
power steering system is not functioning properly and
may need servicing. Have the electric power steering
system checked by a RENAULT dealer.
\bhen the electric power steering warning light
illuminates with the engine running, the power assist
to the steering will cease operation but you will still
have control of the vehicle. At this time, greater
steering efforts are re\fuired to operate the steering
wheel, especially in sharp turns and at low speeds.
(See “Electric power steering system” (P.5-35) .)
Engine oil pressure warning light
\bhen the ignition switch is in the “ON” position, the
engine oil pressure warning light illuminates. After
starting the engine, the engine oil pressure warning
light turns off. This indicates that the oil pressure
sensors in the engine are operational.
If the engine oil pressure warning light illuminates or
blinks while the engine is running, it may indicate that
the engine oil pressure is low.
Stop the vehicle safely as soon as possible. Stop the
engine immediately and call a RENAULT dealer.
CAUTION:
.Running the engine with the engine oil
pressure warning light illuminated could
cause serious damage to the engine.
. The engine oil pressure warning light is not
designed to indicate a low oil level. The oil
level should be checked using the dipstick.
(See “Engine oil” (P.8-10) .)
High temperature warning light (red)
\bhen the ignition switch is in the “ON” position, the
high temperature warning light illuminates and then
turns off. This indicates that the high temperature
sensor in the engine coolant system is operational.
CAUTION:
If the high temperature warning light illuminates
while the engine is running, it may indicate the
engine temperature is extremely high.
Stop the vehicle safely as soon as possible. If the vehicle is overheated, continuing vehicle
operation may seriously damage the engine.
(See “If your vehicle overheats” (P.6-10) for the
immediate action required.)
Intelligent Key system warning light (if
e\fuipped)
After the ignition switch is placed in the “ON” position,
this light comes on for about 2 seconds and then turns
off.
This light illuminates or blinks as follows:
. The light blinks in yellow when the door is closed
with the Intelligent Key left outside the vehicle and
the ignition switch in the “ACC” or “ON” position.
Make sure that the Intelligent Key is inside the
vehicle (for model without vehicle information
display) .
. The light blinks in green when the Intelligent Key
battery is running out of power. Replace the
battery with a new one (for model without vehicle
information display) . See “Battery” (P.8-23) .
. The light illuminates in yellow when it warns of a
malfunction with the electrical steering lock
system or the Intelligent Key system.
If the warning light illuminates in yellow while the
engine is stopped, it may be impossible to free the
steering lock or to start the engine. If the light comes
on while the engine is running, you can drive the
vehicle. However in these cases, contact a RENAULT
dealer for repair as soon as possible.
& R Q G L W L R Q
Page 78 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-24Instruments and controls
INDICATORS FOR MAINTENANCE
JVI0005\f
1. En\bine oil replacement indicator
This indicator appears when the set time comes for
chan\bin\b the en\bine oil. You can set or reset the
distance for chan\bin\b the en\bine oil. (See “Trip
computer (for Type C)” (P.2-25) .)
2. Oil filter replacement indicator
This indicator appears when the set time comes for
replacin\b the oil filter. You can set or reset the distance
for replacin\b the oil filter. (See “Trip computer (for Type
C)” (P.2-25) .)
3. Tire replacement indicator
This indicator appears when the set time comes for
replacin\b tires. You can set or reset the distance for
replacin\b tires. (See “Trip computer (for Type C)” (P.2-
25) .)
4. “OTHER” indicator
This indicator appears when the set time comes for
replacin\b items other than the en\bine oil, oil filter and
tires. You can set or reset the distance for replacin\b the
items. (See “Trip computer (for Type C)” (P.2-25) .)
INDICATORS FOR STOP/START SYSTEM
(if equipped for Europe)
JVI0267\f
1. En\bine stop
If the en\bine stops when the Stop/Start System is
activated, the messa\be is shown.
& R Q G L W L R Q
Page 82 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-28Instruments and controls
.WEDDING DAY
Select this s\fbmen\f t\b adj\fst the date \bf the
wedding day message.
MAINTENANCE:
The maintenance intervals \bf the f\bll\bwing items can
be set \br reset f\br the reminders.
. OIL
Select this s\fbmen\f t\b set \br reset the distance
f\br changing the engine \bil.
. FILTER
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing the \bil filter.
. TIRE
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing tires.
. OTHER
Select this s\fbmen\f and set \br reset the distance
f\br replacing items \bther than the engine \bil, \bil
filter and tires.
T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
OPTIONS (UNIT) (except for Hong Kong):
The \bpti\bn men\f bel\bw can be set t\b y\b\fr preference.
. UNIT
Select this s\fbmen\f t\b ch\b\bse the \fnit.
. LANGUAGE
Select this s\fbmen\f t\b ch\b\bse the display
lang\fage.
. STOP/START (if eq\fipped f\br E\fr\bpe)
Select this s\fbmen\f t\b ch\b\bse the CO2 savings
\br the engine st\bp time \fsing the St\bp/Start
System.
(See “St\bp/Start System (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)” (P.2-28) .) T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
Warning check
JVI0014X
T\b see if there are any \bf the f\bll\bwing warnings and
c\brresp\bnding details, select this men\f.
.
Seat belt warning
. N\b key warning
. L\bw f\fel warning
. Parking brake release warning
. D\b\br/back d\b\br \bpen warning
SKIP:
P\fsh the
switch*At\b m\bve t\b the warning
check m\bde.
P\fsh the
switch*Bt\b select \bther men\fs.
ALERT:
This item is available \bnly when a warning is displayed.
Select this men\f t\b see the details \bf warnings.
Resetting displays
When the average f\fel c\bns\fmpti\bn, average speed,
elapsed time is displayed, p\fsh the trip c\bmp\fter
m\bde switch
*Af\br l\bnger than 3 sec\bnds. The
display \bf average f\fel c\bns\fmpti\bn, average speed,
elapsed time, trip \bd\bmeter, acc\fm\flated time (f\br
Idling St\bp System) and c\frrent saved f\fel c\bns\fmp-
ti\bn (f\br Idling St\bp System) will be reset at the same
time.
STOP/START SYSTEM (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)
JVI0269XType A
JVI0270XType BThe CO2 savings and the engine st\bp time (f\br Type
& R Q G L W L R Q
Page 88 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-34Instruments and controls
SIC3909Type BThe rain-sensing au\fo wiper s\bs\fem can au\foma\ficall\b
\furn on \fhe wipers and adjus\f \fhe wiper speed
depending on \fhe rainfall and \fhe vehicle speed b\b
using \fhe rain sensor loca\fed on \fhe upper par\f of \fhe
windshield.
To se\f \fhe rain-sensing au\fo wiper s\bs\fem, push \fhe
lever down \fo \fhe “AUTO” posi\fion
*1. The wiper will
sweep once while \fhe igni\fion swi\fch is in \fhe “ON”
posi\fion.
The rain sensor sensi\fivi\f\b level can be adjus\fed b\b
\furning \fhe knob \foward \fhe fron\f
*2(High) or \foward
\fhe rear*3(Low) .
. High — High sensi\five opera\fion
. Low — Low sensi\five opera\fion
To \furn \fhe rain-sensing au\fo wiper s\bs\fem off, push up
\fhe lever \fo \fhe “OFF” posi\fion, or pull down \fhe lever
\fo \fhe “
” (LO) or “” (HI) posi\fion.
CAUTION:
Do not touch the rain sensor and around it when
the wiper switch is in the “AUTO” position and
the ignition switch is in the “ON” position. The
wipers may operate unexpectedly and cause to
an injury or a wiper damage. .
The rain-sensing auto wipers are intended
for use during rain. If the switch is left in the
“AUTO” position, the wipers may operate
unexpectedly when dirt, fingerprints, oil film
or insects are stuck on or around the sensor.
The wipers may also operate when exhaust
gas or moisture affect the rain sensor.
. When the windshield glass is coated with
water repellent, the speed of the rain-sen-
sing auto wipers may be higher even though
the amount of the rainfall is small.
. Be sure to turn off the rain-sensing auto
wiper system when you use a car wash.
. The rain-sensing auto wipers may not oper-
ate if rain does not hit the rain sensor even if
it is raining.
REAR WINDOW WIPER AND WASHER
SWITCH (if equipped)
JVI0273XType A
JVI0274XType BIf the rear window wiper operation is interrupted
by snow etc., the wiper may stop moving to
protect its motor. If this occurs, turn the wiper
switch to OFF and remove the snow etc. on and
around the wiper arms. In approximately 1
minute, turn the switch ON again to operate
the wiper.
The rear window wiper and washer opera\fes when \fhe
igni\fion swi\fch is in \fhe “ON” posi\fion.
Wiper opera\fion
The swi\fch posi\fion “INT”*1opera\fes \fhe wiper
in\fermi\f\fen\fl\b.
The swi\fch posi\fion “ON”
*2opera\fes \fhe wiper
con\finuousl\b.
To s\fop \fhe wiper opera\fion, \furn \fhe swi\fch \fo \fhe
“OFF” posi\fion.
Reverse synchronization function (if equipped):
When \fhe windshield wiper swi\fch is on, moving \fhe
selec\for lever \fo \fhe “R” (Reverse) posi\fion will opera\fe
\fhe rear window wiper.
& R Q G L W L R Q
Page 231 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
WARNING:
.Never use wheel nuts which are not provided
with your vehicle. Incorrect wheel nuts or
improperly tightened wheel nuts may cause
the wheel to become loose or come off. This
could cause an accident.
. Never use oil or grease on the wheel studs
or nuts. This may cause the wheel nuts to
become loose.
. The T-type spare tire is designed for emer-
gency use only.
1. Clean any mud or dirt from the surface \fetween the wheel and hu\f.
2. Carefully put the spare tire on and ti\bhten the wheel nuts with your fin\bers. Check that all the
wheel nuts contact the wheel surface horizontally.
3. Ti\bhten the wheel nuts alternately and evenly, more than 2 times in the sequence illustrated (
*1-*4) , with the wheel nut wrench, until they are
ti\bht.
4. Lower the vehicle slowly until the tire touches the \bround.
5. Ti\bhten the wheel nuts securely, with the wheel nut wrench, in the sequence illustrated.
6. Lower the vehicle completely.
Tighten the wheel nuts to the specified torque
with a torque wrench as soon as possible. Wheel nut tightening torque:108 N·m (11 kg-m, 80 ft-lb)
The wheel nuts must be kept tightened to
specification at all times. It is recommended
that the wheel nuts be tightened to specification
at each lubrication interval.
WARNING:
Retighten the wheel nuts when the vehicle has
been driven for 1,000 km (600 miles) . (also in
cases of a flat tire, etc.)
Stowin\b dama\bed tire and tools
WARNING:
. Be sure that the tire, jack and tools used are
properly stored after use. Such items can
become dangerous projectiles in an accident
or sudden stop.
. The T-type spare tire is designed for emer-
gency use only.
1. Securely store the dama\bed tire, jack and tools used in the stora\be area.
2. Replace the spare tire cover and the floor cover.
3. Close the \fack door.
REPAIRING FLAT TIRE (for model with
emer\bency tire puncture repair kit)
The emer\bency tire puncture repair kit is supplied with
the vehicle instead of a spare tire. This repair kit must
\fe used for temporarily fixin\b a minor tire puncture.
After usin\b the repair kit, see a RENAULT dealer as
soon as possi\fle for tire inspection and repair/
replacement.
CAUTION:
. RENAULT recommends using only Genuine
RENAULT Emergency Tire Sealant provided
with your vehicle. Other tire sealants may
damage the valve stem seal which can cause
the tire to lose air pressure. .
Do not use the emergency tire puncture
repair kit provided with your vehicle on other
vehicles.
. Do not use the emergency tire puncture kit
for a purpose other than to inflate and check
the tire pressure for the vehicle.
. Use the emergency tire puncture kit only on
DC12V.
. Keep water and dust off the emergency tire
puncture kit.
. Do not disassemble or modify the emer-
gency tire puncture kit.
. Do not galvanize the emergency tire punc-
ture kit.
. Do not use the emergency tire puncture
repair kit under the following conditions.
Contact a RENAULT dealer or professional
road assistance.
— when the sealant has passed its expira-
tion date (shown on the label attached
to the bottle)
— when the cut or the puncture is approxi- mately 6 mm (0.25 in) or longer
— when the side of the tire is damaged
— when the vehicle has been driven with a considerable loss of air from the tire
— when the tire is completely displaced inside or outside the rim
— when the tire rim is damaged
— when two or more tires are flat
In case of emergency6-5
& R Q G L W L R Q