run flat RENAULT TWINGO 2009 2.G Electrical Equipment - Electric Windows, Sunroof Workshop Manual

87D-40
MR-413-X44-87D000$767_eng.mif
V1
87D
ELECTRIC WINDOWS - SUNROOF
Electric sunroof: Defect and safe modes
INHIBITING THE ANTI-PINCH FUNCTION
The roof mechanism may be subject to various problems (jammed by ice, snow etc. or mechanical damage due to
an accident), therefore, the anti-pinch system must be easy to disable. The electric roof anti-pinch function can be
disabled to overcome a point of resistance (damaged rail, foreign body in the runners).
Mode:
–Index of the switch in the closed position with anti-pinch detection. Hold the centre of the control (1) down until the
anti-pinch function has been triggered.
–The roof closes in single-step mode (or smoothly) in 5 cm stages in the sliding position and in 1 cm stages in the
tilt position until the centre of the control (1) is released.
–When the control is released, the anti-pinch function is reactivated.
–If the sunroof is faulty, it is possible to move the sunroof manually using a flat-blade screwdriver. Note:
If the operation is not carried out immediately after the anti-pinch is triggered, it will not be disabled.
1

New Twingo
MR-413-X44-87D000$767_eng.mif