wiring RENAULT TWINGO 2009 2.G Electrical Equipment - Interior Lighting Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2009, Model line: TWINGO, Model: RENAULT TWINGO 2009 2.GPages: 26, PDF Size: 0.09 MB
Page 7 of 26
81B-7
MR-413-X44-81B000$835_eng.mif
V1
81B
ALP 1 The front courtesy light does not work in forced illumination mode
NOTESThe doors must be closed and the engine switched off.
Does the front courtesy light work when one of the doors is opened?
NO
Check the condition of the interior light bulb.
Is the bulb okay?
YES
Use a test bulb to check for + 12 V between connection BPT and MAM of component 213.
Is the test light lit?
NO
Test the continuity of connection BPT between component 213 and component 645.
Is the continuity correct?
YES
See 87B, passenger compartment
connection unit.
YES
Replace the front courtesy light.
NO
Replace the front courtesy light bulb.
YES
Fault on connection MAM between component 213 and the
chassis earth. Repair the wiring. If there is a repair procedure
(see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring, otherwise
replace it.
INTERIOR LIGHTING
Fault finding chart
NO
Fault on connection BPT between component 213 and
component 645. Repair the wiring. If there is a repair
procedure (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
MR-413-X44-81B000$835_eng.mif
Page 8 of 26
81B-8
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 2 The interior lights do not go out in forced extinction mode
NOTESThe doors must be closed and the engine switched off
Check the insulation to the earth of connection 13 E between components 213 and 645.
Is the insulation correct?
YES
See 87B, passenger compartment connection unit.
NO
Fault on connection 13E between component 213 and
component 645. Repair the wiring. If there is a repair
procedure (see Technical Note 6015A, Repairing
electrical wiring, Wiring: Precautions for repair),
repair the wiring, otherwise replace it.
Page 10 of 26
81B-10
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 3
CONTINUED
Use a test bulb to check for + 12 V between connection BPT of component 213 and a chassis earth.
Is the test light lit?
NO
Test the continuity on connection BPT between components 213 and 645.
Is the continuity correct?
YES
See 87B, passenger compartment connection unit.
YES
Fault on connection 13E between components 213 and
645. Repair the wiring. If there is a repair procedure (see
Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
NO
Fault on connection BPT between components 213 and
645. Repair the wiring. If there is a repair procedure (see
Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
Page 11 of 26
81B-11
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 4 The front ceiling light does not go out when the door is closed
NOTESCheck that status ET463 “door(s) or tailgate” is closed.
Check the insulation to the earth of connection 13 E between components 213 and 645.
Is the insulation correct?
YES
See 87B, passenger compartment connection unit.
NO
Fault on connection 13E between component 213 and
component 645. Repair the wiring. If there is a repair
procedure (see Technical Note 6015A, Repairing
electrical wiring, Wiring: Precautions for repair),
repair the wiring, otherwise replace it.
Page 13 of 26
81B-13
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 5
CONTINUED
Use a test bulb to check for + 12 V between connection BPT component 213 and a chassis earth.
Is the test light lit?
NO
Test the continuity of connection BPT between components 213 and 645.
Is the continuity correct?
YES
See 87B, passenger compartment connection unit.
YES
Fault on connection MAM of component 213. Repair
the wiring. If there is a repair procedure (see Technical
Note 6015A, Repairing electrical wiring, Wiring:
Precautions for repair), repair the wiring, otherwise
replace it.
NO
Fault on connection BPT between components 645 and
213. Repair the wiring. If there is a repair procedure (see
Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
Page 15 of 26
81B-15
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 6
CONTINUED
Use a test bulb to check for + 12 V between connection BPT of component 213 and a chassis earth.
Is the test light lit?
YES
Test the continuity on connection MAM between
components 213 and 645.
Is the continuity correct?
YES NO
See 87B, passenger
compartment
connection unit.
YES NO
See 87B, passenger
compartment
connection unit.
NO
Test the continuity on connection BPT between
components 645 and 213.
Is the continuity correct?
Fault on
connection MAM
between
components 645 and
213. Repair the wiring.
If there is a repair
procedure (see
Technical Note
6015A, Repairing
electrical wiring,
Wiring: Precautions
for repair), repair the
wiring, otherwise
replace it.Fault on connection BPT
between components 645
and 213. Repair the
wiring. If there is a repair
procedure (see Technical
Note 6015A, Repairing
electrical wiring, Wiring:
Precautions for repair),
repair the wiring,
otherwise replace it.
Page 17 of 26
81B-17
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 7
CONTINUED
Use a test bulb to check for + 12 V between connection BPT of component 213 and a chassis earth
Is the test light lit?
NO
Check the continuity on connection BPT between components 213 and 645.
Is the continuity correct?
YES
See 87B, passenger compartment connection unit.
YES
Fault on connection 13E between components 213 and
645. Repair the wiring. If there is a repair procedure (see
Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
NO
Fault on connection BPT between components 213 and
645. Repair the wiring. If there is a repair procedure (see
Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring,
otherwise replace it.
Page 18 of 26
81B-18
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 8The front courtesy light does not go out when the doors are closed
NOTESCheck that status ET463 “door(s) or tailgate” is open.
Check the insulation to the earth of connection 13 E between components 213 and 645.
Is the insulation correct?
YES
See 87B, passenger compartment connection unit.
NO
Fault on connection 13E between components 213 and
645. Repair the wiring. If there is a repair procedure
(see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the
wiring, otherwise replace it.
Page 20 of 26
81B-20
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 9
CONTINUED
Use a test bulb to check for + 12 V between connection BPT of component 213 and a chassis earth.
Is the test light lit?
NO
Test the continuity on connection BPT between components 213 and 645.
Is the continuity correct?
YES
See 87B, passenger compartment connection unit.
YES
Fault on connection MAM. Repair the wiring. If there is
a repair procedure (see Technical Note 6015A,
Repairing electrical wiring, W iring: Precautions for
repair), repair the wiring, otherwise replace it.
NO
Fault on connection BPT between components 213 and
645. Repair the wiring. If there is a repair procedure
(see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the
wiring, otherwise replace it.
Page 22 of 26
81B-22
MR-413-X44-81B000$835_eng.mif
V1
INTERIOR LIGHTING
Fault finding chart81B
ALP 10
CONTINUED
Use a test bulb to check for + 12 V between connection BPT component 213 and a chassis earth.
Is the test light lit?
NO
Test the continuity of connection BPT between components 213 and 645.
Is the continuity correct?
YES
See 87B, passenger compartment connection unit.
YES
Fault on connection MAM of component 213. Repair
the wiring. If there is a repair procedure (see Technical
Note 6015A, Repairing electrical wiring, Wiring:
Precautions for repair), repair the wiring, otherwise
replace it.
NO
Fault on connection BPT between components 645 and
213. Repair the wiring. If there is a repair procedure (see
Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring,
otherwise replace it.